other metal working machines used for sale (11,173)

pressure: 230 tthroat: 345 mmstroke: 40-160 mmno. of strokes: 45 Hub/minram - range of adjustment: 100 mmtable surface area: 1000x660mm mmram surface: 700x500 mmtable height: 800 mmtool hole in ram: Ø65 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Type: T-7 Manufacturer: Leadwell Year: 2006 Control: Fanuc Oi-TC with 8.4” LCD Max. machining diameter: 350 mm Max. machining length: 550 mm Max. bar diameter: 65 mm Chuck size: 210 mm Spindle speed: 4500 rpm Spindle taper: A6 Number of tool positions: 12 Max. tool holder diameter: 40 mm Spindle motor power: 15 / 18.5 kW Machine weight: 4600 kg Central lubrication system Hydraulic tailstock Chip conveyor Electrical cabinet cooling Collet clamping 3-jaw chuck Ø 210 mm Jaw clamping pressure control via M-code Hard jaws – set, soft jaws –set Coolant system 4 bar Bar feeder preparation Oil mist extraction Absolent year 2023 - extraction performance = 1,000 m3/hour. Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC lathe Type: GLS-200 Manufacturer: Goodway Year: 2016 Control: Fanuc Oi - TF Hours: 4851 Max. swing diameter: 500 mm Swivel seat diameter: 310 mm Max. turning diameter: 360 mm Max. turning length: 500 mm Max. load capacity: 85 kg HOWA chuck size: 8" Rod diameter: 65 mm Hole through spindle: 76 mm Spindle bearing diameter: 110 mm Spindle: A2-6 Spindle speed: 45 - 4500 rpm X: 1210 mm Z: 520 mm Turret: 12 positions Tailstock Bar feeder Tool probe Scoop for removing workpiece Machine weight: 3,200 kg Dimensions: 2432 x 1643 x 1727 mm Machine in good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer: Nabertherm Model: RSRC 470/270/13S Year of Manufacture: 2019 Type of Machine : Large-diameter tube furnace Technical Specifications: - Maximum pipe diameter: 470 mm - Heated length: 2700 mm - Number of heating zones: 3 - Furnace chamber dimensions: 670 x 2700 x 670 mm - Maximum temperature: 1300 degrees C - Operating temperature: 1250 degrees C - Rotation control range: 1 to 5 rpm - Electrical power: approximately 120 kW - Nominal voltage: 400 VAC - Connection power: 120 kW/kVA - Outer dimensions (L x W x H): 3150 x 1560 x 1155 mm (without base frame) - Weight: under 3000 kg - Documentation: EC declaration of conformity and operating instructions included Find more here - / Contact us at -

An industrial drying oven Biagosch & Brandau, which has been overhauled by Neitz, is available. Fuel: natural gas, calorific value: 7600kcal/Nm³, gas pressure: 200mm/Ws, fuel consumption: 2.75Nm³/h, operating temperature: 120°C, heating capacity: approx. 23.3kW/20000kcal/h. An on-site inspection is possible.

We are selling a complete used strip processing line consisting of 6 machines offered together as a fully automated coil-to-press production system.Machines 1 to 3 form a strip processing unit with a shared control cabinet and hydraulic system with a total power of 35 kW. Common Material Specifications • Material grades: St 37, St 52, bright and galvanised • Material thickness: 1.0 mm to 6.0 mm • Material width: 50 mm to 500 mm • Maximum material cross-section: 1500 mm2 Machine 1 • Type: decoiler with expanding mandrel • Manufacturer: ARKU • Model: AH 5000/600/MSG-4Q • Year of manufacture: 2002 • Condition: used, operational, very good • Maximum coil weight: 5 tonnes • Maximum coil diameter: 2000 mm • Expanding range: 470 mm to 530 mm • Weight: 5500 kg • Special features: hydraulically driven expanding mandrel, pressure arm, and roller Machine ...

eccentric press Type: LE 250 P Manufacturer: VSS Year: 2008 Pressing force: 250 t Stroke: 30-140 mm Max number of strokes: 45/min Slide adjustment: 110 mm Worktable dimensions: 1120 x 800 mm Ram dimensions: 800 x 475mm Machine weight: 13000 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer: Rump Model: Strahlanlagen Xedura 1500 Year of Manufacture: 2017 Type of Machine : Wire belt blasting machine Condition: good to very good Maintenance: regularly, once a year Beam hours: 1,849 Total operating hours: 2,146 (approximately 200 hours per year) Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC Rated power: approximately 82 kW Find more here - / Contact us at -

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Clamping plate: Scribing and marking plate -Length: 1500 mm -Width: 1010 mm -Height: 170 mm -Sheet thickness: 44 mm -Quantity: 1 mounting plate available -Price: per piece -Transport dimensions: 1010/1500/H170 mm -Weight: 633 kg

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with adjustable feet -Length: 7990 mm -Width: 2480 mm -Height: 350 mm -Sheet thickness: 30 mm -Quantity: 2 mounting plates available -Price: per piece -Transport dimensions: 7990/2480/H350 mm / 1200/800/1000 mm/piece -Weight: 9500 kg/piece

wire dia.: . mmwire length: . mmpulling capacity: 7 ttotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 4029 Suction Manufacturer: 3NINE LINA, Type: LINA 500 Oilmist Separator Machine NO.: LI500-65-CC-543, Year of manufacture: 2006 Specifications: Fence effect 500m3/hour m/3 Motor power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min./max Degree 5-50 Degree Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg

Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

length: 760 mmwidth: 730 mmheight: 1120 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 760 mmwidth: 730 mmheight: 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 760 mmwidth: 730 mmheight: 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-36

CONTROLS  CNC controls SIEMENS 840 D SL CHARACTERISTICS HEAT TREATMENT EQUIPMENT  heating method: induction DIMENSIONS / WEIGHTS  space requirements -left/right-: 8044 mm  space requirements -front/back-: 8046 mm  total height: 4000 mmELECTRICAL SPECIFICATIONS  mains power supply: 624 kVAPower Data:Mains connection power: 624 kVAMains voltage: 400 VRated current: 900 AMains frequency: 50 HzTransformer:Power: 560 kVAVoltage: 400 / 580 VCurrent: 809 / 558 AFrequency: 50 HzConverter:Power: 552 kVA / 450 kWVoltage: 750 VCurrent: 667 AFrequency: 6 – 10 kHzStarting:Power: 50 kWVoltage: 400 VCurrent: 90 AFrequency: 50 HzAuxiliary Equipment:Voltage: 400 VCurrent: 25 AFrequency: 50 HzControl Voltage:Voltage: 230 / 24 VCurrent: 5 / 40 AFrequency: 50 Hz / DCAutomation KUKA Roboter

CONTROLS  PLC SIEMENS S7 300 FEEDSTOCK TUBE  external diameter min.: 20 mm  external diameter max.: 70 mm  wall thickness min.: 1 mm  wall thickness max.: 6.5 mmMACHINE CHARACTERISTICS SWAGING  force: 630 kN  stroke rate (max.): 630 /minELECTRICAL SPECIFICATIONS  total power consumption: 40 kWTube pointing machine HAGINGER AHM 63 with slide feeder S- Material: Steel tubes with a strength of 800 N/sqmm- Max. forming force: 4 x 630 kN- Drive motor power: 30 kW

Machine tool manufactured in 2008. This BVL RC 1950 RW 2T features a useful length of 1545 mm, a maximum useful width of 1545 mm, and a maximum useful height of 1000 mm. It includes a 2-tank system for washing and rinsing, with a wash tank capacity of 825 liters and a rinse tank capacity of 825 liters. If you are looking to get high-quality washing capabilities, consider the BVL RC 1950 RW 2T machine we have for sale. Contact us for further details.

CNC horizontal boring machine Type: WHN 13.8 A-CNC Manufacturer: TOS Year: 1979 Overhaul: 2007 Control: Heidenhain TNC 530 Spindle diameter: 130 mm Spindle taper: ISO 50 Main motor power: 37 kW X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - / Contact us at -

CNC wire cutter Type: CUT 200 mS Manufacturer: AgieCharmilles Year: 2013 Control: EDM Expert X: 350 mm Y: 220 mm Z: 220 mm U/V: 350 × 220 mm Max. bevel cutting: 45° Table size: 680 × 450 mm Max. workpiece weight: 750 kg Tub size: 1000 × 550 mm Processing type: Plunge cutting Automatic wire feeding: Yes Wire diameter: 0.10 – 0.30 mm Axis rapid traverse: 3 m/min Dielectric: 200 l Power supply: 380 V / 3 phases Dimensions: 2020 × 2200 × 2015 mm Weight: 2450–3500 kg Machine in good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer: Avyac Model: NC540 Year of Manufacture: 2021 Type of Machine : Drill grinding machine Condition : Like new Operating Hours: 1200 approx Loading system: Yes, automatic loading system included Weight: 2,000 kg Certification: CE marked Application: Grinding of drill bits and single-lip drill bits Find more here - / Contact us at -

Generator: Agiepuls 60 HSF, travel X/Y/Z: 350mm/250mm/350mm, table dimensions X/Y: 600mm/450mm, max. workpiece weight: 400kg, max. workpiece dimensions X/Y/Z: 840mm/600mm/250mm, max. electrode weight: 100kg, machine dimensions X/Y/Z: approx. 2450mm/1750mm/3000mm, weight: approx. 4000kg. The machine has PCB damage. Documentation available. An on-site inspection is possible.

A Niehoff double twist stranding machine is available. Spool size: 630mm, max. spool width: 475mm, copper processing range: 0.09mm²-6mm², single wire diameter: 0.05mm-0.85mm, max. speed: 6000rpm, max. tensile force: 200N, machine dimensions X/Y/Z: approx. 3000mm/1700mm/1600mm, weight: approx. 3000kg, operating hours: approx. 7371h. Including frame and some accessories as well as spare parts. Documentation available. An on-site inspection is possible.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 8700 €: 167.91 €: 10000 kg: 5000 to: 750 mm: 4500 mm: 300 mm: 2 x 70 mmConventional rotating fixtures are preferred in areas such as welding, painting and paint preparation,due to their cost-effective design and ease of integration.They are manufactured as standard with capacities ranging from 1 to 150 tons.Roller material: PolyurethaneCapacities up to 500 tons are also possible upon request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 24 mm -Dimensions: 300/205/H635 mm -Weight: 62 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping plate with T-slot, clamping table, T-slot table, milling machine table, tilting table -Clamping table: Milling machine table, tilting table, T-slot table -Table surface: 250 x 250 mm, swivels on both sides -T slots: Slot width: 14 / 25 mm, Slot depth: 24 mm -Dimensions: see photos -Transport dimensions: 300/250/H155 mm -Weight: 26.4 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 35 mm -Groove: 20 x 60 mm -Dimensions: 275/160/H308 mm -Weight: 28.6 kg