other metal working machines used for sale (11,175)

\"Calibration gauge for tip calipers 0–500 mmCalibration gauge for tip calipers in a wooden case.The gauge is used to check and adjust tip calipers over defined test distances. Several reference dimensions are engraved on the bar. The design is made as a solid, ground steel strip with threaded holes on the sides for mounting or fixing. Engraved reference dimensions (visible):10 mm / 10.00 mm / 20.30 mm / 60.0 mm / 80.50 mm / 120.41 mm / 160.72 mm / 380.15 mmTotal length according to the tape measure approx. 500 mm. Type: Calibration gauge for tip calipersMeasuring range: up to approx. 500 mmMaterial: steel, ground Referencepoints: several engraved test distancesDesign: with threaded holes\" Auction-ID: A7-46417-333

KLOPP H 1000 - Planing machine -Planing length max. 1000mm -Planing width max. 750mm -Hydraulic drive with infinitely variable speed -Chisel removal -Automatic transverse feed in two areas (fine & wide finishing) -Quick adjustment (rapid traverse) of the work table Dimensions: LxWxH 3.4x1.5x1.6 meters / Weight 4000 kg

Manufacturer: Amada Model: Promecan GHE 630 Type of Machine : Hydraulic Guillotine Shear Find more here - / Contact us at -

Manufacturer: Boschert Model: Profi Bend 28/100 Year of Manufacture: 2012 Type of Machine : CNC die bending press Technical Specifications - Press force: 28 tonnes - Bending length: 1000 mm - Maximum sheet thickness: approx. 10 mm - CNC control: Cybelec ModEva Pac / CybTouch 15 - Tool clamping system: WILA mechanical - Backgauge: 2 lateral height-adjustable depth stops with 2 stop faces each - Backgauge (Y-axis): programmable, 99 programmes up to 30 steps each - Bending angle repeatability: 0.02 mm - Handwheel for bending angle adjustment Electrical Data - Power supply: 3 x 400 V / 50 Hz - Connected load: 5.5 kVA - Control voltage: 24 V - Required fuse: 3 x 16 A Machine Condition The machine was used exclusively in a research and testing environment throughout its life, resulting in very few operating hours. Find more here - / Contact us at -

Manufacturer:Boschert Model: EvoLine 300 Digital Year of Manufacture: 2012 Type of Machine : Manual Punching Machine Technical Specifications - Throat depth: 300 mm - X-travel range: 500 mm - Punching force: 280 kN - Maximum sheet thickness: 6 mm - Quick-change tooling system: TRUMPF compatible Electrical Data - Power supply: 3 x 400 V / 50 Hz - Connected load: 6 kVA - Control voltage: 24 / 230 V - Required fuse: 3 x 16 A Included Accessories - Mechanical stops - Digital readout display Machine Condition The machine was used exclusively in a research and testing environment throughout its life, resulting in very few operating hours. Find more here - / Contact us at -

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 23200 €: 445.44 €: 1000x2000 mm: HYPERTHERM Powermax 45 XP : 6 mm: 12 mm: 25 mm: 4 mm: 45 A: 45 A 50 % ED, 32 A 100 % A: 24 m/min: unter 1/10 mm: 300 l: 400 kg/m²: 2560 mm: 1460 mm: 1500 mm: 400 kgcompressed air powered plasma sourceHYPERTHERM Powermax 45 XPCNC-workbench software (external PC not included)height adjustment by arc voltageset-up laserprecision profile rail guide(HiWin)zero backlash HTD drive beltdriven by step motorssolid frame constructionseperate renewable support gratewater trough to catch flying sparksswimming burner bearing in combination with exchangeable slide screws, enables constant cutting heighthand operation unit for comfortable processing and set up on the workpieceusers manual in GERMANaccording to CE rulesALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type com ...

CONTROLS  electronic controls BOSCH REXROTH CML 40.2 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE  length: 50 mm  diameter: 700 mmELECTRICAL SPECIFICATIONS  total power consumption: 100 kWThe machine processes workpieces with an outer diameter of 20–50 mm and lengths between 300 and 700 mm. With a cycle time of approximately 20 seconds, it enables high production speeds whilst maintaining consistent quality.

turning diameter: 580 mmturning length: 1500 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

planing lenght: 625 mmplaning width: 570 mmtotal power requirement: 3 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,4 x 1,4 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Decoiler of construction steel coils up to 5tons. Machines worked just less than one year.

x-travel: mmy-travel: mmz-travel: mmx-axis: 6000 mmy-axis: 2600 mmz-axis: 1600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: n mmspindle passage: 20 mmturning length: mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 220 mmcontrol: Fabnuc OSPL 500 L turning diameter: 150 mmweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Demag hoist 10 tonKind of: hoist Capacity: 10 ton Drop: 6,5 meter Tackle speed: 0,6 & 6 m/min

Auction-ID: A1-46315-71

HABERLE HR 302 deburring machine ; suitable for pipes, pipes and conduits; equipped on a mobile chassis; Voltage: 380 volts ; Power: 0.88 / 1.32 kW ; Spindle speeds: 100 / 200 rpm ; Auction-ID: A1-45170-23

This 3-axis CHARMILLES ROBOFORM 35P die-sinking EDM machine was manufactured in 2002. It features a travel range of 350 mm in the X-axis, 250 mm in the Y-axis, and 300 mm in the Z-axis, with a maximum workpiece weight of 500 kg. The machine is equipped with a 32-position rotary tool changer and a high-speed Z-axis for enhanced performance. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM 35P machine we have for sale. Contact us for further details.

This 5-axis MSC Chemnitz BFT90/5 MSC boring machine was manufactured in 2009. It features a substantial table size of 1000 x 1120 mm with a maximum table load of 2.5 t. The machine offers impressive feed rates of 4000 mm/min and a spindle speed range of 4 – 1600 rpm. If you are looking to get high-quality boring capabilities, consider the MSC Chemnitz BFT90/5 MSC machine we have for sale. Contact us for further details.

This 5-axis CHARMILLES TECHNOLOGIES Robofil 290P was manufactured in 1999. It features a travel range of 400 mm x 250 mm x 200 mm and can accommodate a maximum workpiece weight of 500 kg with dimensions of approximately 850 x 500 x 200 mm. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES TECHNOLOGIES Robofil 290P machine we have for sale. Contact us for further details.

2 x CNC lathe Type: KIT 450 Manufacturer: HYUNDAI-KIA Year: 2006 Control: Fanuc Series 0i-TC X: 400 mm Z: 250 mm Max spindle speed: 6000 rpm Machine weight: 2700 kg Chip conveyor Tool holders In good condition, fully functional, under power Find more here - / Contact us at -

Automatische roterende freeskop: 90° en 45° Automatische gereedschapswisselaar met 30 posities spanentransporteur koelunit + filter maximaal werkstukgewicht 6 tonLongitudinal travel X-axe: 1700 mm Cross travel Y-axe: 1200 mm Travel Z-axe: 1000 mm Dimensions clamping space- table: 2000 x 1000 mm Max height workpiece: 934 mm Power on spindle: 22 kW Admission in millinghead (ISO): BT50 Max speedrange: 35 > 3000 rpm Control: Heidenhain Power needed (KVA): 56 kVa Length : 5300 mm Depth: 4950 mm Height: 2800 mm Weight: 18 ton

Clamping plate with prism, centering table, centering device, plate field, welding table, welding table, plate boring machine -Ideal for centering shafts -Width: 658 mm -Table length: 2396 mm -Height: 115 mm -Working height: 920 mm -Prism length: 2900 mm -Prism width: 140 mm -Dimensions: 2920/730/H1200 mm -Weight: 540 kg

spindle diameter: 125 mmx-travel: 2000 mmy-travel: 1600 mmControl: Siemens 840 C z-travel: 1400 mm: 600 mm : ja total power requirement: 40 kWweight of the machine ca.: 27 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Manufacturer: Mitsubishi Electric Model No.: QA10 Machine Type: CNC Wire EDM Machine Year of Make: 2000 Serial number: 59Q10069 Max. workpiece size: 800 x 575 x 215 mm Max. workpiece weight: 800 kg Table size: 630 x 530 mm Travel distance: approx. 1300 mm (XYZ total) Wire diameter: 0.05 – 0.25 mm Wire speed: 2 – 25 m/min Machine dimensions: 1718 x 2385 x 1920 mm Weight: approx. 2500 kg Tank capacity: 400 l Configuration CNC control (closed loop) Up to 6 axes simultaneously 10.4\" color display RS232 interface Paper filter system (2-fold) Dielectric system integrated Note: Water cooling unit defective. Technical data taken from existing machine documentation. Auction-ID: A1-46315-20

Offer 24093 Technical data: - Rivet shank diameter max. 6 mm - Feed force 1200 daN - Rivet time setting 0 - 10 sec - Projection 140 mm - Table size 250 x 175 mm - Installation height / table height adjustable - Stroke 40 mm - Operating pressure 5 bar - Pressure reducer - Drive 400 V / 0.6 / 0.75 kW - Space requirement approx. W 500 x H 1650 x D 650 mm - Weight approx. 480 kg

Auction-ID: A7-46309-9

Auction-ID: A7-46309-50