other metal working machines used for sale (11,745)

This inverter with IGBT technology should not be missing from the basic equipment of professional welders and metalworkers. The device has a high maximum power and is therefore perfect for heavy work. Still, it's relatively easy to take with you because of its compact dimensions. The inverter has an electrode clamp, a MIG torch for fast welding and a grounding clamp for safety.

bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmDist. spindle nose & working surface base:350 - 1260 Spindle travel:315 max. boring diameter:40 mmDistance between spindle axis and column:350 - 1260 spindle taper:4 MKRange of spindle speeds:22,4 - 2800 Number of spindle speeds:16 Number of spindle feeds:16 Table:500 x 630 Travel of spindle head:900 mmtotal power requirement:3,5 kWdimensions of the machine ca.:2150x1070x2840 mfeed:0,09 - 1,5 m/minweight of the machine ca.:3 t

Per one plate

grinding length:1000 mmgrinding width:550 mmworkpiece height:400 mmsurface area:1300x450 mmcross feed motor:0,55 kWgrinding wheel speeds:1400 U/mintotal power requirement:18 kWweight of the machine ca.:4800 kgUsed / overhauled surface grinding machine, Make ELB, type SWBE 010 NCK, machine no. 163811079Machine with automatic notification in all 3 axes.Overhaul scope:Machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality.All guideways new eingeschabt on Neumaschinengeometrie.Wear parts replaced defective components reparariert or replaced.Reassembly, compl. Functional testing and internal loss.Machine repainted.Machine in perfect, produktionsbereitem state.Accessories:- Vertical feed with pre-selectable active digital display, direct measuring system Heidenhain- Electric magnetic chuck with straight coarse / fine pole pitch, dimensions 1 ...

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg

SICK WL14-2P430S02 Reflection Photoelectric Sensor, 1028719, Made in Germany

Galvanized mat; Packed on package

PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:1100 kgTechnical description :KUKA Robot Pedestal with drilling pattern for Kuka robot KRC2.KR 210 robot was mounted.Total height 1200 mm.

Unused

FANUC Robodrill α-T21FA Machine Type: Vertical CNC Machining Machine / High Speed Milling & Drilling Center Application: Small and medium series, precision metalworking, drilling, milling, threading Control: FANUC 16i/21i CNC control Axles: 3-axis system (X/Y/Z) Travel: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 330 mm Table / Work Area: Large, rigid machine table Suitable for multi-clamping systems High positioning accuracy thanks to direct drive servos Spindle: Speed range typ. 10,000 – 24,000 rpm Precision bearings for high concentricity Suitable for high-speed machining and thread milling Tool Changer (ATC): 21-cavity tool magazine Fast tool change for short non-productive times Chain/carousel type, depending on version Drive & Dynamics: Linear Ball Screws FANUC Servo Drives with High Acceleration Very short cycle times (typical for Robodrill) Cooling &  ...

Manufacturer: Okuma & Howa Machinery Ltd., Nagoya, Japan Model: 4VA Machine No.: 02479 Year of Make: 1986 Control: FANUC (type A02B-0076-B101, built in 1986) Description of the machine Vertical CNC machining center of the robust 4VA series made in Japan. The machine is complete and has a solid cast iron bed, which is designed for high stability and durability. The control unit is based on an older FANUC controller with CRT monitor and a German MATRA control panel. Hydraulic and coolant systems are available, including an integrated cooling unit. The machine is completely encased and has a large spindle hood with ventilation unit. The device shows age-appropriate signs of wear and dirt in the work area. No obvious crash damage is visible. The optical condition of the outer sheet metal cladding is heavily used, but technically complete. Due to the advanced age, a retrofit effort may ...

dimensions 1 roll Ø550xH110mm

COMMERCY 426 XP welding machineComplete MIG/MAG station with torches, hoses and cables. Gas bottle with regulator included. 400 V three-phase power supply. Dimensions 800 × 600 × 1500 mm. Weight approx. 120 kg.

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Equipped with ABS. Steel; 1 phase; Rated input voltage: 220V; No-load voltage: 62V; Current range: 20-350; Related duty cycle: 80%; Rated Input Voltage (V): AC380V ± 15% 50/60 Hz; Input power consumption: 15.8; Rated input current (A): 25; Welding current range (A): 20-350A; No-load voltage (V): 70; Efficiency (%): 85; Power Factor: 0.9; Protection class: IP21S; Insulation class: H; Dimensions (mm): 540x280x390; Weight: 22kg; Max. Input Capacity: 4.2 kW; Applicable welding rod: 2.5-3.2 mm; Variable current control; Advanced IG BT inverter technology; control mode; Unused in box

working area:10700 mmTube length:300-11000 mmmin. workpiece diameter:80 mmmax. workpiece diameter:260 mmPower:120 KWdimensions:21,5 x 5 x 3,8 m mmweight:90.000 kgpre-turn capacity:200 cdm/minHS Code: 8461 90 00Description of the systemManufacturer / Type Vario 1200-11000 Year of manufacture 1999Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same.Machine control SIEMENS 840 D - 6 axesMax. speed on the scraper/peeling device: n = 200 min-1

For sale is a hydraulic impact shears from the German quality manufacturer WIEGER Maschinenbau, type FSW 4.5/3030, built in 1966. The machine impresses with its solid, durable design and is ideal for cutting sheet metal up to 4.5 mm thick with a working length of 3,000 mm. The WIEGER scissors are considered extremely stable, reliable machines that deliver precise cutting quality even after decades of use.

Partially equipped, approx. 25 pieces, with bracket

grinding diameter:630 mmgrinding length:3000 mmcentre height:315 mmtotal power requirement:35 KVAweight of the machine ca.:13,3 t

Article: pickoff with shaftManufacturer: Schüttepickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GFpickoff shaft C26GF9S1gear WG-67Sholder B73GF1S1Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Specifications Material: Metal and heat-resistant plastic Welding method: MMA (stick welding) Includes: Electrode holder, earth clamp Power: 3 KVA, 220V Current regulation: 10–100A Maximum Electrode Thickness: 3.2mm Insulation class: F Protection class: IP21S Duty cycle: 20% at 100A / 40°C Open voltage: Max. 78V Efficiency: 85% Power factor: 0.7

consisting of various mounting platens and mounts Weight. approx. 150kg

Article: TraysBasic dimensions: length 425mm x width 274mm2 different versions: blue, yellowThere are several used trays for salePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Ø 7 cm

Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused

Unused in the original packaging Rated input voltage 220 Frequency Hz: 50/60 Rated input power Kw: 7.5 Rated input current A: 42 Duty cycle 40C 10 min

weight of the machine ca.:1 tdimensions of the machine ca.: 2 x 2 x 2 m