presses used for sale (1,713)

SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /min  stroke rate (min.): 15 /minCOUNTER RAM  nominal force: 75 toV-RING  nominal force: 75 toTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mmSTRIP-FEEDER  sheet width max.: 250 mm  sheet thickness max.: 10 mm  sheet length min: 1500 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 3150 mm  space requirements -front/back-: 2120 mm  total height: 3000 mm  total weight approx.: 14000 kgLocated in Barcelona - SpainInstallation space of the toolsFront passage between the columns:Movable: 560 mmFixed: 560 mmSide passage between the columns:Movable: 270 mmFixed: 270 mmTool height:Movable: 160 - 305 mmFixed: 175 - 320 mmVertical adjustability of the upper clamping plate:Movable ...

chamfer lenght: 650 mmplate thickness: -1.6 mmweight of the machine ca.: 150 kgdimensions of the machine ca.: 2000 x 1000 x 900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25515 Specifications: - Max. working length 2050 mm - Column passage 1750 mm - Max. pressing force 850 kN - Distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 365 mm - Lifting speeds - Rapid traverse downward speed 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx. W 2700 x H 2900 x D 2100 mm - Weight approx. 9100 kg - with: - with CNC control DELEM , DA - Two-hand control panel with foot switch - Controlled crowning device - Back gauge with height adjustment 5 - 860 mm - hydr. Tool clamping - Die table displacement pneumatically supported - Sharpening tool + V-die

Offer 25513 Specifications: - Max. working length 2050 mm - Column passage 1750 mm - Max. pressing force 850 kN - Distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 365 mm - Lifting speeds - Rapid traverse downward speed 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx. W 2700 x H 2900 x D 2100 mm - Weight approx. 9100 kg - with: - with 5 axis CNC control DELEM , DA - Y1 + 2 ; X ; R ; Z - Two-hand control panel with foot switch - Controlled crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Tool clamping - Die table displacement pneumatically supported

Offer 25514 Specifications: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2700 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported

Key data: 40 t, 1030 mm

For sale is an automated press brake with 1st hand robot system for serial sheet metal part forming. Press brake 2019 BYSTRONIC Xpert 40/1030 Robot 2019 KUKA KR10R 1100 sixx Specifications Press brake - Press force: 400kN (40t) - Working length: 1030mm - Control: ByVision Robot - Max. nominal load capacity: 11kg - Reach: 1100mm - Axles: 6-axle - Position repeatability: 0.02mm - CE certified safety modules Characteristics - Fully automated bending cell with integrated 6-axis industrial robot - from 1st hand - Dimensions (LxWxH): approx. 3.25m x 2.8m x 2.5m - ByVision Bending control terminal with 22-inch Full HD touchscreen Machine condition - Operating hours: 7,724 h - Cycle counter: 310,212 - Complete service history, regular inspections - Technically perfect condition - Functional test: can be demonstrated during inspection - Location: Niederroh ...

CONTROLS  PC controller BECKHOFF Offer for servicesof complete Overhaul of a Customer-Owned Fineblanking Press FEINTOOL GKP 160Scope of Overhaul• Complete disassembly into individual components• Inspection of all parts, including crack testing of critical components• Overhaul of the drive system, new motors• Reworking and precise alignment of all guideways• Complete overhaul of the hydraulic cylinders• Overhaul of the clamping tables• Installation of a new hydraulic unit• Renewal of the pneumatic system• Renewal of the electrical systemModernisation / Retrofit• Combined table• Servo feed systems• Central lubrication system• RAZIOL band lubrication• New brake/clutch unit• BECKHOFF PC-based control system with touch panel• PILZ safety control system• Implementation of CE conformityNotes• Special options and customer-specific extensions can be integrate ...

CONTROLS  electronic controls SIEMENS S7 300 PRESS DESIGN  drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 2   table cushion: no   quick die change system: yes PRESS FORCES  total force (nominal): 250 toPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1100 mm  height above floor level: 1105 mm  opening in bed (left-right): 1700 mm  opening in bed (front-back): 305 mmSLIDE  table surface (left-right): 2080 mm  table surface (front-back): 1000 mm  stroke rate (max.): 120 /minSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  stroke adjustment: yes   stroke min.: 20 mm  stroke max.: 180 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 500 mm  distance between columns (H-frame): 2055 mm  passline opening (free passage in side columns): 810 mmDECOILER  sheet ...

Specifications: Pressure: 50 t Bending length: 2000 mm Equipment: - Backgauge - Emergency stop push button - Foot control

An eccentric press / punching press year approx. 1992 is offered. Viewing is possible by arrangement.

An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement.

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: knuckle-joint SLIDE  total force (nominal): 160 to  stroke: 60 mm  stroke rate (max.): 70 /minCOUNTER RAM  nominal force: 40 to  stroke: 14 mmV-RING  nominal force: 50 to  stroke: 10 mmTOOL DIMENSIONS  lower table (left-right): 480 mm  lower table (front-back): 520 mm  upper table (left-right): 480 mm  upper table (front-back): 520 mm  shut height max.: 314 mm  ram adjustment: 80 mm  distance between columns (H-frame): 500 mm  passline opening (free passage in side columns): 220 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 210 mm  sheet thickness max.: 6 mm  feeding step max.: 999.9 mm  sheet length min: 2000 mm  pilot release system: yes   band lubrication system: yes Complete refurbished fineblanking press: disassembly into individual parts findings of all compon ...

Key data: 250 t, 100 mm

Heavy-duty cylinder with two-stage pump Type SB -2504 - RO Series 365 Pressure 250 ton

pressure: 30 tthroat: 250 mmtable-size: 650 x 500 mmstroke: 400 mmdayligth: min. 120 / max. 500 mmControl: Simatic HMI Touch Siemenstotal power requirement: 13 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,5 x 1,70 x 2,85 mSetup mode and single stroke operating modeTwo side tables with a support surface of 850x500mmwith hydraulic ball bars for heavy workpiecesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...

The Dorst TPA 6 is a used mechanical powder compaction press suitable for various industrial applications due to its robust performance and flexibility. It boasts a maximum pressing force of 60 kN and a withdrawal force of 30 kN, addressing a wide range of compaction needs. The machine supports a maximum filling height of 70 mm and a pressing travel of 30 mm, with an upper punch stroke of 95 mm and an adjustable travel of 50 mm. This ensures precise control over the compaction process. Operating at speeds between 7 to 32 strokes per minute, the Dorst TPA 6 consumes approximately 70 liters of compressed air per minute and has a total connected load of about 3.5 kW. It measures 2220 mm in width, 1060 mm in depth, and 2250 mm in height, weighing around 1,200 kg. With a gear oil capacity of 12 liters and a workplace-related sound level of 75 dB(A), it is designed to endure continuous use whi ...

The Dorst TPA 4 is a used mechanical powder compaction press well-regarded for its sturdy performance in various industrial settings. It features a maximum pressing force of 40 kN and a withdrawal force of 30 kN, making it versatile for different compaction tasks. With a maximum filling height of 70 mm and a pressing travel of 30 mm, this machine efficiently handles varied operational demands. The upper punch has a stroke of 95 mm with an adjustable travel of 50 mm, enabling precise control during processes. The press operates within a speed range of 7 to 32 strokes per minute, consuming around 70 liters of compressed air per minute and requiring a total connected load of approximately 3.5 kW. It is designed with dimensions of 2220 mm in width, 1060 mm in depth, and 2250 mm in height, while weighing about 1,200 kg. The gear oil capacity is 12 liters, ensuring durability and the ability t ...

pressure: 185 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 175 mm/sbending speed: 0-12 mm/stotal power requirement: 22 kWweight of the machine ca.: 15.500 kgdimensions: 4970 x 3260 x 2090 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 18 kWweight of the machine ca.: 13.000 kgdimensions: 5080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A "Raster Zeulenroda" (today Zeulenroda Presstechnik) step press type "Paust 16.2" with 160 kN press force is sold. The machine was completely overhauled in 2006 and has been in use in 1-3 shifts since then. A visit is possible from Monday to Friday.

Die SAFAN H-Brake 120-3100 TS1 ist eine robuste hydraulische Abkantpresse, die für konstante Genauigkeit, hohe Betriebszeiten und schnelle Umrüstzeiten ausgelegt ist. Mit 120 Tonnen Presskraft und 3100 mm Biegelänge bietet dieses Modell zuverlässige Leistung für anspruchsvolle Produktionsumgebungen. Als eine gebrauchte SAFAN H-Brake 120-3100 TS1 aus dem Jahr 2005 kombiniert diese Gebrauchtmaschine bewährte SAFAN-Qualität mit intelligenten Optionen, die Ihre Werkstatt produktiv halten.Was das für Sie bedeutet- Kapazität und Flexibilität. 120 T Presskraft und 3100 mm Biegelänge bewältigen eine breite Palette von Teilen in Stahl, Edelstahl und Aluminium.- Genauigkeit über die volle Länge. Wila CNC-Bombierung und eine Einlauftiefe von 400 mm sorgen für gleichbleibende Winkel und reduzieren Nacharbeiten.- Schnelle Einrichtung. Wila New Standard hydraulische Werkzeugklemmen besc ...

Die SAFAN H-Brake 120-3100 TS1 ist eine robuste hydraulische Abkantpresse, die für konstante Genauigkeit, hohe Betriebszeit und schnelle Umrüstungen entwickelt wurde. Mit 120 Tonnen Presskraft und 3100 mm Biegelänge bietet dieses Modell zuverlässige Leistung für anspruchsvolle Produktionsumgebungen. Als eine gebrauchte SAFAN H-Brake 120-3100 TS1 aus dem Jahr 2005 vereint diese Gebrauchtmaschine die bewährte SAFAN-Bauqualität mit intelligenten Optionen, die Ihre Werkstatt produktiv halten. Was das für Sie bedeutet - Kapazität und Flexibilität. 120 T Presskraft und 3100 mm Biegelänge bearbeiten ein breites Spektrum an Teilen in Stahl, Edelstahl und Aluminium. - Genauigkeit über die gesamte Länge. Wila CNC Crowning und eine Ziehtiefe von 400 mm helfen, konstante Winkel zu halten und Nacharbeit zu reduzieren. - Schnelle Einrichtung. Wila New Standard hydraulische Werkzeugspannu ...

Key data: 60 t, 370 mm, 10 mm

Eccentric Press Compressive Force 60 Ton Equipped: -Hydraulic clutch -Hydraulic overload protection

Key data: 100 t, 330 mm, 10 mm

Press Type P 100 RE Pressure 100 ton Free passage between the two uprights 420 mm Slab dimensions 610 x 410 mm Table dimensions 950 x 650 mm Installation height plunger lower 400mm Plunger position 90 mm Stroke rate 55 min Motor power 7.5 KW Weight 7000 kg Press is equipped : - Air coupling - Hydraulic overload protection

Offer 25471 Specifications: - Compressive force 75 t - Projection approx. 300 mm - Table size approx. 800 x 600 mm - Height-adjustable table - Stroke adjustment approx. 16 - 140 mm - Plunger adjustment 80 mm - Stroke rate 80 rpm - Pneumatic connection - Drive 400 V - Space requirement approx. W 1800 x H 2450 x D 2000 mm - Weight approx. 4000 kg

Offer 25450 Specifications: - Compressive force 100 t - Projection 300 mm - Table size approx. 650 x 450 mm - Height-adjustable table - Diarrhea hole in the table approx. 200 x 100 mm - Large installation height approx. 450 mm - Plunger area 70 x 140 mm - Peg hole in the ram 40 x 80 mm - Tappet adjustability 60 mm - Stroke adjustment 10 - 100 mm - Stroke rate 80 rpm - Pneumatically assisted coupling - Drive 380 V / 5.5 kW - Space requirement approx. W 1350 x H 2550 x D 1600 mm - Weight approx. 5000 kg

Key data: 600 t

Max Tool length: 3000mm Max Tool Width: 2000mm Min Tool Height: 500mm Total Tool Weight: 20,000kg Max Closing Speed: 400 mm/sec

Press force: 1250 KN, Stroke rate: 55 min-1, Plunger adjustment: 75 mm Stroke: 20-120 mm, Motor power: 11 kW, Voltage: 380 V Machine weight: 8.6t Projection: 340 mm, Pusher clamping surface: 620 x 300 mm, Table clamping surface: 650 x 1000 mm, Ortlinghaus hydraulic clutch with double brake, Two-hand control device Demolition at the pestle was professionally repaired.

Eccentric press PEE I 250, in working conditon.