presses used for sale (1,704)

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 38000 €: 725.8 €: 100 to: fix : 1250 mm: 500 mm: 780 mm: 1500 mm: 25 mm/s: 10 mm/s: 4 mm/s: 1300x600 mm: 1250x400 mm: 2400 mm: 1200 mm: 2450 mm: 2450 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guardAL ...

Offer 25270 Specifications: - Pressure capacity 135 t - Working width 4300 mm - Passage between the uprights 3150 mm - Table width 180 mm - Projection 300 mm - Installation height 400 mm - Feed speed 70 mm/sec. - Working speed 10 mm/sec. - Retraction speed 80 mm/sec. - Plunger stroke 200 mm - Pneumatic connection - Drive 400 V / 15 kW - Space requirement approx. W 4800 x H 2900 x D 1900 mm - Weight approx. 12800 kg - with: - Swivel arm – control panel with 8 axes control FastBEND - Safety light barrier - Cambering - Pneum. Upper tool clamping -Mot. Backgauge - various upper + lower tools - Separate tool cabinet with trolley rack BEDRUNKA - HIRTH - Two-hand control panel, foot switch,

Inv. Num. : 8585 Type: KPRW 160 Producer: Kieserling Created: 1972 Parameters: Compressive force: 160 t

Inv. Num. : 8584 Type: PEDA 160 Producer: IWK Created: 1972 Parameters: Compressive force: 160 t

Inv. Num. : 8583 Type: REP 100 Producer: Heilbronn Created: 1989 Parameters: Compressive force: 100 t Stroke length: 6-100 mm Maximum stroke rate per minute: 100 1/min Total power requirement: 11 kW Machine weight: 7000 kg

Offer 25247 Specifications: - Max. pressing force 50 t - Max. ram stroke approx. 260 mm - Lifting speed fast approx. 1540 mm/min - Lifting speed slowly approx. 210 mm/min - Stand width approx. 770 mm - Stand depth approx. 195 mm - Min. / max. installation height approx. 200 / 1100 mm - Table height-adjustable with 5 plug-in bolt grids each approx. 180 mm - Support plate approx. 450 x 450 mm - Height adjustment of the table with hand crank cable - Drive 400 V / 1.5 kW - Space requirement approx. W 1750 x H 2100 x D 850 mm - Weight approx. 600 kg

pressure: 60 tthroat: 280 mmstroke: 10-140 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 740x560 mmram surface: 380x195 mmhole in the table: 300x200 mmtable height: 760 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 tthroat: 220 mmstroke: 8-96 mmno. of strokes: 120 Hub/minram - range of adjustment: 50 mmtable surface area: 580x440 mmram surface: 305x170 mmhole in the table: 215x175 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 45 tthroat: 230 mmstroke: 4-80 mmno. of strokes: 120 Hub/minram - range of adjustment: 55 mmtable surface area: 695x455 mmram surface: 365x180 mmhole in the table: 220x180 mmtable height: 890 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 300 mmstroke: 10-140 mmno. of strokes: 60 Hub/minram - range of adjustment: 60 mmtable surface area: 800x500 mmram surface: 430x230 mmhole in the table: Ø150 mmtable height: 860 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 170 tchamfer lenght: 3050 mmdistance between columns: 2550 mmControl: CYBELEC ModEva 10 S column arm: 405 mmstroke of ram: 400 mmdistance between table / ram: 320-720 mmfeed down: max. 220 mm/secfeed bending: max. 10 mm/secfeed up: max. 220 mm/secconnected load: 27 kVAtotal power requirement: 18,5 kWweight of the machine ca.: 13.600 kgdimensions of the machine ca.: 4200x2000x3000 mmDomestic equipments:Stop support adjustment- Stop area XM-axis (from bending line): 0-1005 mm- Adjustment speed XM-axis: max. 1200 mm/sec- Drive power XM-axis: 0.85 kW- Stop area XS-axis (from bend line): 0-1005 mm- Adjustment speed XS-axis: max. 1200 mm/sec- Drive power XS-axis: 0.85 kWHeight adjustment- Adjustment range R-axis (from table surface): 65-265 mm- Adjustment speed R-axis: max. 200 mm/sec- Drive power R-axis: 1.25 kWDie shift - Adjustment via backgauge (MVX)- Adjustment range: max. 100 m ...

pressure: 175 tchamfer lenght: 3050 mmdistance between uprigths: 2550 mmquantity of oil: 300 lcontrol: Cybelec DNC 1204 PS total power requirement: 15 kWEquipment/accessories:- manual crowning- 3 x manual stop fingers- die displacement- pneum. upper tool clamping- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tthroat: 280 mmstroke: 10 - 90 mmram adjustment: 60 mmno. of strokes: 110 Hub/mintable surface area: 740 x 550 mmclamping plate: 740 x 555 mmram surface: 380 x 200 mmdaylight, max. stroke above - ram adjustment above: 360 mmtotal power requirement: 4 kWweight of the machine ca.: 3,850 tdimensions of the machine ca.: B 1,1 x T 1,6 x H 2,3 m- fixed table- clamping plate- hydraulic clutch Ortlinghaus with additional brake- manual central lubricationMachine is partially overhauled in our company as follows:- disassembled, cleaned and completely technically inspected- new colour- shaft pulling, crack inspection, new seals- new control cabinet with touchscreen- current press inspectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Dorst DK 250 is a robust used powder compaction press engineered by DORST, offering a substantial pressing force of up to 2500 kN. It supports operations with a maximum withdrawal force of 150 kN and a supporting force in the pressing position reaching 120 kN. Designed for precision, this model includes a 220 mm upper punch stroke with an adjustable travel of 120 mm. The press accommodates a pressing travel and withdrawal travel, each up to 50 mm, making it versatile for various pressing tasks. Operational performance ranges from 6 to 25 strokes per minute, and it provides a filling height of up to 100 mm. The Dorst DK 250 is efficient, consuming approximately 500 liters of air per minute and demanding a connected load of around 60.0 kW. Its dimensions, at 2500 mm in width, 1900 mm in depth, and 4800 mm in height, alongside a weight of approximately 18,500 kg, underscore its solid co ...

AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(), 30kW - Japanese standard Pgsc N D D Hou Dxb Tjxop Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Profile height max. 140 mm Punching height max. 112 mm Punching stroke: 15 mm Press force 45 kN Weight approx. 500 kg

Nominal pressing force ... 100t Table dimensions ... 1000 x 640mm Stroke adjustment ... 125mm Plunger adjustment ... 90mm Number of rams ... 75-150 rpm Main engine power ... 6/10kW L x W x H ... 1725 x 2230 x 2970mm Mechanical weight ... 10100kg

Nominal pressing force ... 15t Strößelhub ... 220mm L x W x H ... 1050x690x1400mm Machine weight ... 450kg

Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press, press machine, hydraulic punch for Schüco tools, hydraulic press, multifunctional punch, punch, universal punch, punching machine -Handover: in the current condition as viewed -Condition: Cylinder slightly leaky -Hydraulic press: Hydraulic single-column press -Pressing force: 160 tons -Stroke: 600 mm -Insertion height: 800 mm -Table size: 660 x 800 mm -Table hole: Ø 250 mm -Projection: 330 mm -Operation: hand lever -Dimensions: 1780/1090/H2920 mm -Weight: 8000 kg

pressure: 25 tthroat: 200 mmstroke: mmpressure: 25 tno. of strokes: 140 Hub/minwindow in frame: 240 mmadjustment of stroke: 8...80 mmram - range of adjustment: 50 mmsurface of ram: 355 x 220 mmtable-size: 560 x 400 mmhole in table: 160 mmtotal power requirement: 3 kWweight of the machine ca.: 2,23 tdimensions of the machine ca.: m- distance table slide: 250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 320 mmstroke: 110 mmtable surface area: 850 x 550 mmdayligth: 385 mmoil volume: ca. 500 lram surface: 560 x 450 mmtotal power requirement: 30 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 1,5 x 2,0 x 3,0 m- Machine was overhauled in 2008- Work area enclosure with Sick light barrier- Installation height 580 mm - without large ram with ejector and trunnion clamping piece - Conversion of hydraulics to proportional valve- Conversion of switch cabinet - Electrical travel measurement, Siemens Soft-Start, touch panelThe following work was carried out in-house:- Machine was technically inspected- Machine was repainted- Before delivery, a current UVV test with braking time measurement is carried outMachine is safe for manual insertion work on the open moldThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure total: 500 ton Ram stroke: 500 mm Slide adjustment: 400 mm Daylight: 1350 mm Table surface area : 3000 x 1700 mm Slide area: 3000 x 1700 mm Die cushion capacity in table: 80 ton Die cushion stroke: 250 mm Number of strokes: 20 s.p.m. Required power: 75 kW Height over floor approx.: 8000 mm Weight of machine approx.: 160 ton

A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.

pressure: 110 tchamfer lenght: 3100 mmdistance between columns: 2600 mmstroke: 150 mmdayligth: 350 mmwork height max.: 900 mmtotal power requirement: 22 kWweight of the machine ca.: 7700 kgdimensions of the machine ca.: 3550 x 1800 x 2600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic 60 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 60 ton Year of manufacturing: 1975

Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Technical data Nominal Power : 30 ton Year of manufacturing: 1973

Hydraulic 30 ton C-Frame Press CAVENAGHI & RIDOLFI Nominal Power : 30 ton Year of manufacturing: 1982

Key data: 75 t, 80 mm, 120 1/min

Pressure 75 t Stroke rate 120-600 / min Sheet width 10-300 mm Table size 1050 x 820 mm Pusher clamping surface 960x820 mm Distance table - UK plunger 380 mm Adjustable stroke - max. 80 mm Feed length 0-150 mm Total power requirement 20 kW Machine weight approx. 13 t Feed unit with max. belt speed 70 m/min Eccentric shaft with 4-fold bearings 2 connecting rods Central lubrication incl. magnetic belt conveyor - in use until 2020 -Operating instructions -Manual - Circuit diagram etc..

4 column press Tox MAg 008288A001 BJ 2016