1,720 presses used for sale

pressure: 50.0 tstroke: 260 mmdayligth: 1135 mmstroke speed: 215 mm/mincolumn travel between the guideways: 775 mmtotal power requirement: 1.5 kWweight of the machine ca.: 530 kgrange L-W-H: 1650 x 850 x 2085 mm MADE IN ITALY Furnishing:- powerful workshop presses for craft and repair businesses- 2x delivery speeds- Hydraulic high pressure unit- Regulating and 3-way valve: Feed - idle - reverse- Height-adjustable recording table using a cable winch- Piston made of tempered and chrome-plated special steel- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10.0 tstroke: 190 mmtable surface area: 520 x 120 mmdayligth: 350 mmcolumn travel between the guideways: 520 mmweight of the machine ca.: 104 kgdimensions of the machine ca.: 910 x 500 x 1210 mm MADE IN ITALY Furnishing:- powerful workshop presses for craft and repair businesses- manual-hydraulic workshop press- 2-way valve with automatic piston retraction- Two-stage descent speed- Height-adjustable support table- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50.0 tchamfer lenght: 2090 mmdistance between columns: 1665 mmcolumn arm: 400 mmtable width: 60.0 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 92.0 mm/secstroke: 200 mmtable height: 910 mmdayligth: 470 mmNumber of working hours: 36.160 htotal power requirement: 6.0 KWweight of the machine ca.: 4850 kgrange L-W-H: 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours ()- Inspected condition - Machine video -https://www.youtube.com/watch?v=x8Z0h2_wA6sEquipment:- CNC electro-hydraulic press brake- CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) CNC-controlled backgauge adjustment (X-axis) CNC-controlled vertical adjustment of the stop fingers (R1+R2) CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) Hand control unit for manual axes movement Pivoting control, front left- AMADA/PROMECAM quick clamping system ...

pressure: 75.0 tchamfer lenght: 2600 mmdistance between columns: 2100 mmstroke of upper beam: 100 mmthroat: 200 mmdayligth: 280 mmworking feed: 8.0 mm/secreturn speed: 55.0 mm/sec: 330 barControl: konv. work height max.: 840 mmtotal power requirement: 7.5 kWweight: 4700 kgrange L-W-H: 2900 x 1450 x 2100 mm from a prototype construction In good condition ()- in checked conditions - machinevideo -https://www.youtube.com/watch?v=3KZF0BT8dOQFeatures:- Simple electro-hydraulic press brake, including torsion bar- Pivoting control panel, front left- Electro-motorized + stepless depth adjustment (Y1 + Y2 axes)- Manually adjustable material backgauge Manually adjustable with hand crank - from the front Includes analog position indicator 2 manually adjustable stop fingers- 1 split pointed upper tool set - HACO holder- 1 rotating MULTI V die block (lower tool)- Side guard (pivoting doors)- 1 freely ...

pressure: 160 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 400 mmram stroke speed: 200 mm/secwork speed: 10.0 mm/minreturn speed: 165 mm/secwork stroke: ca. 350 mmdayligth: ca. 660 mmoil volume: 450 ltr.table height: 830 / 950 mmtable width: 75.0 / 60.0 mmvoltage: 400 Volttotal power requirement: 18.5 kWweight: 13440 kgrange L-W-H: 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request------------------------------------------------------ULTIMA PLUS electro-hydraulic press brake with: increased installation height .. approx. 660 mm increased cylinder stroke .. approx. 350 mm------------------------------------------------------ in checked condition - machine video -https://www.youtube.com/watch?v=chgCaXLnpa8Equipment:- CNC electro-hydraulic die/press brake- CYBELEC CNC control DNC 880 S swiveling control panel, front right 2D graphic ...

pressure: 200 tstroke: 300 mmtable surface area: 1900 x 440 mmcolumn travel between the guideways: 1900 mmworking feed: 5,0 mm/secengine output: 15,0 kWweight of the machine ca.: 4.800 kg.range L-W-H: 2.570 x 1.665 x 2.860 mmFurnishing:- Robust electro-hydraulic workshop press, with adjustable cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed- Piston can be stopped in any position- Hydraulic tank mounted on the side- Operation manualThe data for this ad was created with ModulMWS - the softw ...

pressure: 100 tstroke: 300 mmtable surface area: 1070 x 315 mmcolumn travel between the guideways: 1070 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secoil volume: 90.0 lengine output: 5.5 kWweight of the machine ca.: 1870 kg.dimensions of the machine ca.: 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon requestFurnishing:- Robust electro-hydraulic workshop press, with adjustable cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x de ...

pressure: 60.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmback stop - adjustable: max. 800 mmoil volume: 150 ltr.voltage: 400 Vengine output: 7.5 kWWeight: 4320 kgrange L-W-H: 2250 x 1960 x 2750 mm Demonstration/demo machine () From our showroom (like new) With very few operating hours--------------------------------------------------CNC press brake with special equipment Version ERGO - knee room for the operator flexible articulated arm mount for the controller increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color s ...

pressure: 150 tstroke: 300 mmtable surface area: 1070 x 290 mmcolumn travel between the guideways: 1070 mmajustment speed: 9.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 11.0 kWweight of the machine ca.: 1870 kg.range L-W-H: 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon requestFeatures:- Robust electro-hydraulic workshop press with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in. and out bolts, bearings, bushings, and much more.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount- 1 set of V-block prism supports- Pressure gauge for pressure display- Simple manual control with: 1 feed speed 1 working speed 1 retraction speed- Piston c ...

pressure capacity max.: 10.0 tbending capacity - flat iron: ca. 100 x 12 mmstroke: 0 - 150 mmdayligth: ca. 100 mmassembly distance: ca. 200 mmprint area: 0 - 100 kNstroke speed: max. 0.6 m/mintable surface area: 1000 x 600 mmwork height max.: 845 mmoperating pressure: max. 260 barengine output: 1.1 kWweight: 400 kgrange L-W-H: 1100 x 800 x 1000 mmEquipment:- Robust electro-hydraulic horizontal bending machine- Large worktable (1000 x 600 mm)- Hydro-mechanical stroke limiter- Continuously adjustable punch stroke- Side-mounted, one-handed operation- 1x bending tool set Reversible die with 80/50/40 mm opening- Control cabinet - frontThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tstroke: 300 mmtable surface area: 1070 x 290 mmcolumn travel between the guideways: 1070 mmajustment speed: 9.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 11.0 kWweight of the machine ca.: 2070 kg.range L-W-H: 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon requestFurnishing:- Robust electro-hydraulic workshop press, with adjustable cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x delivery speed 1x working speed 1x re ...

pressure: 80 tchamfer lenght: 2500 mmstroke: 200 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke: 400 mmquantity of oil: 300 lControl: CYBELEC DNC 1200 PS Eco total power requirement: 15 kWweight of the machine ca.: 10.700 Kgrange L-W-H: 4200x2200x3200 mmEquipment:- Controlled axes: Y1, Y2, X, R, Z1, Z2- SICK” light barrier in front of the machine- Side safety guards- Protective grille behind the machine- foot switch- incl. toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 tchamfer lenght: 4050 mmdistance between columns: 3050 mmcolumn arm: 300 mmajustment speed: 140 mm/secwork speed: 10.0 mm/secreturn speed: 130 mm/secwork stroke: 360 mmdayligth: 340 - 700 mmtable height: 1000 mmtable width: 200 mmoil volume: 300 ltr.operating pressure: max. 295 barair pressure: 4.5 - 6.0 barvoltage: 3x 400 Volttotal power requirement: 15.0 - 27.0 kWweight: 17200 kgrange L-W-H: 5850 x 2550 x 3200 mm good condition () including new CNC control- in checked condition - machine video -https://www.youtube.com/watch?v=Owh6BjvZ4RMEquipment:- electro-hydraulic CNC press brake- with new CYBELEC VisiTouch 19 touch CNC control (conversion) graphic numerical 2D control 19? modern, streamlined touchscreen with glass surface can also be operated with gloves clear, well-arranged menus in the operators language easy operation thanks to the user-friendly HMI large tool and p ...

pressure: 60.0 tchamfer lenght: 2600 mmdistance between columns: 2050 mmcolumn arm: 310 mmworking feed: 10.0 mm/secreturn speed: 61.0 mm/secstroke: 100 - 140 mmdayligth: 450 mmtable height: 860 mmoil volume: 100 ltr.Control: ELGO P8822 operating pressure: max. 200 barNumber of working hours: ca. 2.370 hvoltage: 380 Vtotal power requirement: 5.5 kWweight of the machine ca.: 5000 kg.range L-W-H: 3000 x 1850 x 2050 mm good / well-maintained condition () with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on requestin checked conditions - machine video -https://www.youtube.com/watch?v=PsUeM3O5wAMEquipment:- NC electro-hydraulic press brake- with ELGO NC control unit P8822 Input of target/actual values for back stop Input of target/actual values for depth adjustment ` swiveling operation, front left manual mode selectable- NC controlled axes: Y1 + Y2 + ...

pressure: 160 tchamfer lenght: 3550 mmdistance between columns: 3100 mmdayligth: 395 mmstroke of upper beam: 200 mmthroat: 350 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 86.0 mm/secwork height max.: ca. 950 mmtable width: 125 mmControl: CYBELEC DNC 60 oil volume: 150 ltotal power requirement: 15.0 kWweight: 10800 kgrange L-W-H: 4700 x 2100 x 2700 mm New price ~ €80,000 From a maintenance workshop In good condition ()- in checked conditions - machinevideo -https://www.youtube.com/watch?v=L6bUrMv-VOMEquipment:- Electro-hydraulic CNC press brake- With DELEM CNC control - Model DNC60 Pivoting control panel, front right Numerical control unit Tool and program library- CNC-controlled axes: Y1 + Y2 + X + CNC crowning- CNC electro-motorized backgauge (X axis) With 2 manually adjustable stop fingers (R + Z axes)- CNC under-table crowning- FIESSLER front safety device- Up ...

pressure: 80.0 tchamfer lenght: 2050 mmdistance between columns: 1550 mmcolumn arm: 250 mmtable width: 85.0 / 135 mmstroke: ca. 390 mmdayligth: ca. 585 mmajustment speed: 180 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/secwork height max.: 1050 mmNumber of working hours: 32.495 hoil volume: 200 loperating pressure: 320 bartotal power requirement: 11.6 KWweight of the machine ca.: 7300 kgrange L-W-H: 3700 x 2000 x 3000 mm Good/well-maintained condition ()- in checked conditions - machinevideo -https://www.youtube.com/watch?v=IKyUmzB0WTI-------------------------- -----------------------CNC electro-hydraulic press brake with: Increased installation height .. approx. 550 mm Increased cylinder stroke .. approx. 390 mm-------------------------------------------------Features:- Robust electro-hydraulic press brake MADE IN GERMANY ()- CYBELEC CNC control DNC 904 PS-A (SN 0332) Pivo ...

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 310 mmstroke: 200 mmajustment speed: 80.0 mm/secworking feed: 10.0 mm/secreturn speed: 58.0 mm/secdayligth: 385 mmtable width: 240 mmwork height max.: 885 / 1050 mmoil volume: 180 ltr.total power requirement: 15.0 kWweight of the machine ca.: 9850 kg.range L-W-H: 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=o_t9BBMsNNsEquipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electric back stop, with ball screws (X axis) with 4x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor adjustment of the immersion depth (Y1 + Y2 axis) with digital position display- swiveling operation, mou ...

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2600 mmcolumn arm: 410 mmajustment speed: 160 mm/secworking feed: 10.0 mm/secreturn speed: 120 mm/secstroke: 265 mmdayligth: 530 mmtable height: 900 mmoil volume: 200 ltr.control: DNC 880 S Number of working hours: ~ 17.200 htotal power requirement: 15.0 kWweight of the machine ca.: 10250 kg.range L-W-H: 4570 x 2360 x 2900 mm good condition () current new price approx. 80.000 euros special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=dyv7iQXcRt4Equipment:- electro-hydraulic CNC press brake- two synchronized cylinders with HIGH PERFORMANCE hydraulic components- with CYBELEC CNC control - DNC 880S 2D graphic display for display and multiple simulation graphic 2D programming easy handling automatic bending sequence calculation and collision detection large product and tool library aut ...

pressure: 300 tchamfer lenght: 4100 mmdistance between columns: 3710 mmstroke - stepless adjustable: 250 mmcolumn arm: 330 mmdayligth: 500 mmtable height: 940 mmtable width: 250 mmworking feed: 7.0 mm/secreturn speed: 90.0 mm/secControl: konv. operating pressure: max. 305 barvoltage: 380 Vtotal power requirement: 22.5 kWweight: 25200 kgrange L-W-H: 4320 x 2100 x 3500 mm well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=rPOBwTfVReoEquipment:- simple, conventional hydraulic press brake- swiveling control panel, left front- electro-motoric back stop (X axis) adjustment via front control panel (button) with analog position display fine adjustment via handwheel, front- with 3x stop fingers, manually adjustable- electro-motoric depth adjustment (Y1+Y2 axis) with analog position display- 1x split set of 85° deer foot upper tool- 1x MultiV - uni ...

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 12.0 mm/minreturn speed: 190 mm/secwork stroke: 275 mmdayligth: 550 mmoil volume: 300 ltr.table height: 900 mmtable width: 90.0 mmvoltage: 400 Volttotal power requirement: 15.0 kWweight: 9800 kgrange L-W-H: 4150 x 2150 x 2800 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A-  ...

pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 100 mm/secreturn speed: 75,0 mm/secwork speed: 7,0 mm/minwork stroke: 180 mmdayligth: 415 mmoil volume: 200 ltr.table height: 900 mmvoltage: 400 Voltrange L-W-H: 4450x2050x2650 mmFurnishing:- DELEM - CNC control model DA-58T- controlled axes: Y1 - Y2 and X- FIESSLER AKAS - laser protection in front of the machine- Deer foot upper tool- Universal die block- manual table crowning- Safety device: light barrier behind the machine- 2 front support arms- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- CE mark / declaration of conformity- Operating manual: machine and control- Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80.0 tstroke: 285 mmflat steel: 300 x 25 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 750 x 1425 mmtotal power requirement: 10.0 kWmotor: 400 Volt 50 Hzoil volume: 120 lweight: 1700 kgrange L-W-H: 1500 x 750 x 1800 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tchamfer lenght: 4100 mmdistance between columns: 3550 mmcolumn arm: 510 mmram stroke speed: 110 mm/secwork speed: 8.4 mm/secreturn speed: 130 mm/secwork stroke: 375 mmdayligth: 650 mmtable height: 1000 mmtable width: 240 mmback stop - adjustable: max. 800 mmoil volume: 400 ltr.voltage: 400 Volttotal power requirement: 30.0 kWweight: 26409 kgrange L-W-H: 5450 x 2650 x 3470 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot ...

pressure: 40.0 tstroke: 285 mmflat steel: 250 x 24 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 660 x 1250 mmtotal power requirement: 4.0 kWmotor: 400 Volt 50 Hzoil volume: 40.0 lweight: 800 kgrange L-W-H: 1450 x 800 x 1300 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1200 mmcolumn arm: 200 mmram stroke speed: 60.0 mm/secreturn speed: 80. mm/secwork speed: 60.0 mm/secwork stroke: 100 mmtable height: 760 mmtable width: 150 mmoil volume: 130 ltr.voltage: 400 VoltControl: ESA E21 total power requirement: 4.0 kWweight: 3030 kgrange L-W-H: 2050 x 1800 x 2030 mm Demonstration/demo machine () From our showroom (like new) With very few operating hoursFurnishing:- compact hydraulic press brake- BERNARDO NC control model E21- swiveling control panel- electrical adjustment of the backgauge- Back stop on recirculating ball spindles- electrical adjustment of the immersion depth- Laser protection device in front- Upper deer foot tool - divided- Tool holder with quick change system- Universal die block- side + rear protective device- 2x front support arms- movable double foot switch (operation)The data ...

pressure: 20.0 tstroke: 185 mmflat steel: 200 x 12 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 480 x 1060 mmtotal power requirement: 2.2 kWmotor: 400 Volt 50 Hzoil volume: 12.0 ltr.weight: 530 kgrange L-W-H: 1150 x 480 x 1400 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3050 mmdistance between columns: 2550 mmajustment speed: 90.0 mm/secworking feed: 10.0 mm/secreturn speed: 75.0 mm/secstroke: 140 mmdayligth: 375 mmcolumn arm: 250 mmtable width: 90.0 mmwork height max.: ca. 950 mmNumber of working hours: 14.100 htotal power requirement: 13.5 kWweight: 8500 kgrange L-W-H: 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours ()Equipment:- CNC electro-hydraulic press brake- DELEM CNC control - model DA 58 Swiveling control panel, front left 2D graphic programming & product display Tool & program library- CNC-controlled axes: Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning- CNC electro-motorized backgauge (X axes) Stop system with 2x CNC-controlled gantries- CNC electro-motorized height adjustment of the backgauge (R axes)- CNC electro-motorized adjustment of  ...

pressure: 100 tstroke: 300 mmtable surface area: 1070 x 260 mmcolumn travel between the guideways: 1070 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secoil volume: 90.0 lengine output: 5.5 kWweight of the machine ca.: 1500 kg.dimensions of the machine ca.: 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon requestFurnishing:- Robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x deliver ...

pressure: 125 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 120 mmajustment speed: 70.0 mm/secworking feed: 7.0 mm/secreturn speed: 60.0 mm/secdayligth: 325 mmtable width: 180 mmwork height max.: 915 mmoil volume: 150 ltr.total power requirement: 12.5 kWweight of the machine ca.: 9100 kg.range L-W-H: 3200 x 1325 x 2470 mm well-maintained condition from a maintenance workshop ()Equipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electro-motor-driven back stop, with ball screws (X axis) with 2x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) with digital position display- swiveling operation, left-hand side- split deer foot + pointing tool- 1x rotatable Multi V univers ...