presses used for sale (1,808)

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm

Pressing force: 40 t table size: 670 x 470 mm plunger surface: 670 x 470 mm clearance between the pillars: 620/470 mm gr. Height: 740 mm Preß speed: 20 mm / s rapid traverse: 50 mm ejector force: 3T Electr. Supply: 380 V, 9.5 kW space: 2200 x 1875 x 3000 mm weight: 2400 kg

Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg

Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg

The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and w ...

Bruderer BSTA 18 600 spm High-performance speed from 100-600 spm Force Max 180 KN Adjustable stroke New Silicon control Pneumatic and hydraulic all new Strip width max 190 mm Feed Bruderer BBV With digital stroke counter with programmable auto stop and digital speed counter Overhauled, very good condition, ready to work.

45 To-Stoessel performance adjustable 45 mm hub adjustable 8-80 mm table size 690 x 410 mm punch mounting 50 mm unloaded 200 mm height 400 mm electric pneumat. Ortlinghaus single-disc clutch and disc brakes with auxiliary brake, Central grease lubrication system, Hohenverstellbar. Report, Wellenrissprufung, see table, UVV - 2014 - still in use ? see operating instructions, Tech.Zustand - good, ready for use

Max. capacity 1000 tons Slide stroke 240 mm Shut-height (max.) 650 mm Wedge adjustment 10 mm Number of slide strokes 100 rp

Crimping force at 12 bar: 8 to Pressure to 4 bar: 4 Table size 280 x 280 mm Height 350 mm RADIUS 160 mm Weight 350 kg W x D x H approx. 0.5 x 0.75 x 2,15 m -Stroke adjustment with fine Skallierung: 0.02 mm -Anti-rotation -pneumatic foot switch

Grote & Hartmann, 380V,50 Hz, 0, 45Kw, Fabrikatnr. 5618/84

Hydraulic Horizontal Straightening Press, used Horizontal multi purpose press, used type: HHP160 max. pressing force/ max. tonnage: 160 t Year built/ year of make: 1965 Manufacturer/ make: Pellissier Hanau max. pressing force/ max. tonnage: 160 t Piston stroke/ stroke of plunger: 400 mm Piston diameter / diam. of piston: 300/ 185 mm Extension / depth of throat: 225 mm Table size/ table size: 1150 x 350 mm Pressing speed/ speed of pressing: 16 ... 6 mm / sec Advance/ advance: 75 mm / sec Return/ rapid return: 208 mm / sec Installation width between Kobendruckstück and traverse pressure pieces/ distance between plunger with ram and locators: 320 mm Distance of the pressure pieces on pistons or table / distance between locators of piston and table: 50 ... 888 mm Total p ...

Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t

Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Nominal force: 1000 kNHydraulic pressure maximum: 250 barConnected load: 21 kVAMains connection: 400 V, 50 HzDimensions (L × W × H) Length: approx. 2.0 to 3.0 m, width: approx. 1.5 to 2.5 m, height: approx. 3.0 to 4.0 m Auction-ID: A7-49604-17

Used REIS 4-column hydraulic press / try-out press. 380 V, 50 Hz, serial no. 02037 visible on plate. Large working area, hydraulic unit and control panel included. Condition as shown in photos; capacity and full specifications to be confirmed. Auction-ID: A1-49190-1

PROFI PRESS 15 TON Broaching Press, Workshop Press, Garage Press. Adjustable pressure and speed; Voltage: 380 volts; Capacity: 15 tons; Cylinder stroke: 600 mm; Distance between column 650 mm Auction-ID: A1-48979-17

Rodcraft WP75P; workshop press, bearing press, hydraulic press; Capacity: 75 tons; Air pressure: 7.5 - 8.5 bar; Hydro-pneumatic: yes; Hand-operated: yes; Cylinder stroke: 250 mm; Weight approx: 500 kg; OLD MODEL Auction-ID: A1-48979-11

Auction-ID: A1-49309-8

Auction-ID: A1-49309-14

equipped with 2-button control console Auction-ID: A1-49001-21

Capacity 630 tons, with DIMECO winders and unwinders Auction-ID: A7-49229-8

Pressing line consisting of: CATTANEO PRM 320-500-3000 mechanical press from 1976, SARONNI 600 coil unwinder from 1958, driver Auction-ID: A7-49229-5

Auction-ID: A1-49001-2

All interested parties are invited to carefully read the attached notice of sale, the inventory of goods and the take-away conditions, as they contain essential information relating to the methods of participation, the requirements, the characteristics of the lots and the obligations provided for the collection of the goods. The submission of an offer implies the full acceptance of the attached documentation. Participation in this lot requires the payment of a deposit equal to 10% of the starting price. For information: matteo.tosin@surplex.com Lot consisting of: Ghielmi - Forming press - 1995 Komage K15 Press Komage K15 Press Giacoletto Hydraulic press CIEM Hydraulic press Hydraulic press 350 Ton Hydraulic press 350 Ton GHIELMI Hydraulic press GATTI PGAS150 Hydraulic press 2000 CARCANO 60TON Hydraulic press Plastic drilling machine Hole filler Grinding machine Grinding machine Grinding ...

Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W Auction-ID: A1-40397-159

Auction-ID: A7-48398-17

Table L x W 700mm x 450mm Auction-ID: A1-49382-28

A deposit of €150.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Slide size 650x450 mm Slide stroke 20-140 mm Strokes per minute 40-80 Max mould height 400 mm Worktop size 1000x660 mm It should be noted that the dismantling and loading operations of the machinery for sale must be carried out exclusively by a specialized external team in charge. The successful bidder will not be able to provide for it independently, but may attend the activities for mere supervision. The related costs, quantified at € 650, will be invoiced directly to the winning bidder by the team in chargeThe cost does not include any disposal of the oils present in the plant, this will be invoiced during disassembly Note: The functionality of the goods has not been verified. T ...

- Four-column hydraulic press for pressing operations with interchangeable tools. - Nominal force 50 T. - Work table 1400 x 1000 mm. - Maximum aperture approximately 1100 mm. - Four-column structure with upper platform for hydraulic group. - Electrical panel with SIEMENS SIMATIC PLC and operator panel. - Photoelectric safety barriers. - It has pressing tools installed. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48840-6