boring mills and machining centers used for sale (3,255)

travel: 600 mmlength: 450 mmwidth: 400 mmspindle turning speed range: 20 4500 U/minControl: Heidenhain TNC 425 weight: 3300 kgdimensions of the machine ca.: 4,0 x 3,8 x 2,1 mtotal power requirement: 15 kWtool taper: HSK A 63 table-size: 850 x 440 mm3-axis machining centreX-axis travel: 600 mmY-axis travel: 450 mmZ-axis travel: 400 mmTable size: 850 × 440 mmTool holder: HSK-A63Spindle speed: 20 – 4,500 rpmControl system: Heidenhain TNC 425Total power requirement: 15 kWMachine weight: approx. 3,300 kgSpace requirement (L × W × H): approx. 4.0 × 3.8 × 2.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 bore stroke: 125 mmShort spindle: MK 3 throat: 210 mmMachine table - usable table surface: 390x390 mmtable load: 65 kgspindle turning speed range: 105-2.650 UpMtotal power requirement: 0,75 kWOverall size: 750x450x1745 mmweight of the machine ca.: 192 kgStandard equipment:- Number of speed ranges 9x2 steps- Coolant device in the machine base- Movable LED machine light- Swivel work table with integrated machine vice on the opposite sideopposite side with jaw width 120 mm- Mains cable and plug therefore immediately ready for use- Drilling table adjustable via gear rack- Depth stop with scale- Emergency stop- According to current CE conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 530 mmz-travel: 510 mmControl: M 730 BM MAPPS IVMain spindle:: max. spindle speed: 10.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 transmission ratio: 1 spindle diameter in front bearing: 80 mmwork table:: table surface area: 900 x 600 mmmax. table load: 800 kgT-slots: 6x 18 x 100 mmdistance spindle /table: 150 - 660 mmTool-Presetter:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 150 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: ca. 1,3 secchange-time chip to chip: ca. 3,45 secfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 30.000 mm/minTipp feed: 0 - 5.000 : 20 mm/mintotal power requirement: 30 kVAweight of the machine ca.: 6,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mDocuments: Chip conveyor: work light: Automatic T ...

: 14 mm: M 10 : MK 2 : 230-4.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 93 kgStandard equipment:5 TFT LCD display with touch function: Manual input of spindle speed setpointsetpoint, actual speed display, integrated drilling depth display with touchzero point transfer, virtual drilling depth scale in the display, machine statusstatus indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU.- AC motor 230 Volt, 50 Hz- Connection plug ready fitted, cable length 3 m- Infinitely variable speed adjustment via potentiometer- Three separate buttons for clockwise rotation - anticlockwise rotation - stop (spindle stop due to brake func ...

bore capacity in steel (diameter): 40.0 mmbore capacity in cast iron: 45.0 mmthroat: 300 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 615 x 430 mmturning speeds: 100 - 1800 U/mincolumn diameter: 145 mmthread: M 24 ST60thread: M 30 GG20feed: 0.1-0.2-0.3-0.4 mm/Udistance spindle /table: 138 / 688 mmengine output: 1.4 / 2.2 kWweight: 470 kgMachine height: 1865 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop i ...

bore capacity in steel (diameter): 80 ( 100 ) mmturning speeds: 20 - 1400 U/minspindle taper MT: 6 : Rechts- + Linkslauf quill stroke: 400 mmfeed range - spindle: 0,045 - 1,5 mm/Uarm length: 1600 mmworkpiece height max.: 400 - 1800 mmbase plate surface area: 1170 2185 mmaccessories:: 2x Würfeltisch+Kühlmittel automatic clamping device electr.: Elektro - Mechanisch total power requirement: 14 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3 x 1,5 x 3,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 75 mmtotal power requirement: 14 kWweight of the machine ca.: 10 tspindle speed:: 12,5 - 1.600 U / minthroat: 2000 mm- capacity at boring: 75 mm ( St 45 )- spindle diam. 115 mm- taper in spindle: 110 mm/ Morse 6- distance column to drilling spindel: 500.. . 2000 mm- vertical adjustment of arm: max. 1100 mm- distance column to drilling spindel: 450.. 2000 mm- drilling depth: 450 mm- range of speeds: 12,5 ...1600 U/ min // rpm- feed: 0,63 ... 3,15 mm / U- angle of arm: 360 °The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 530 mmz-travel: 510 mmControl: MSC 504 Mori SeikiMain spindle:: turning speeds: max. 10.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 spindle bearing diameter: 70 mmdistance spindle /table: 150 - 660 mmwork table:: table surface area: 1.100 x 600 mmmax. table load: 800 kgT-slots: 6x 18 mmtable height over floor: 900 mmturret:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: 1,3 secchange-time chip to chip: 4,1 - max. 9,2 secfeeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 20 m/minfeed speeds: max. 6.000 mm/minTipp feed: 1 - 5.000 mm/mintotal power requirement: 27 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 3,5 x 3,0 x 2,8 mDocuments: Chip conveyor: Coolantsystem: high press ...

x-travel: 800 mmy-travel: 530 mmz-travel: 510 mmControl: MSC 504 Mori SeikiMain spindle:: turning speeds: max. 10.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 spindle bearing diameter: 70 mmdistance spindle /table: 150 - 660 mmwork table:: table surface area: 1.100 x 600 mmmax. table load: 800 kgT-slots: 6x 18 mmtable height over floor: 900 mmturret:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: 1,3 secchange-time chip to chip: 4,1 - max. 9,2 secfeeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 20 m/minfeed speeds: max. 6.000 mm/minTipp feed: 1 - 5.000 mm/mintotal power requirement: 27 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 3,5 x 3,0 x 2,8 mDocuments: Chip conveyor: Coolantsystem: high press ...

x-travel: 560 mmy-travel: 560 mmz-travel: 630 mmControl: MSX 701 III MAPPSMain spindle:: Max. rpm: 14.000 min/-1power capacity - main spindel: 18,5 / 11 kWmax. Torque: 120 Nmtool taper: MAS BT 40 distance spindle center to table: 80 - 640 mmdistance Spindlenose and center of table: 100 - 730 mmpallet changer:: numbers of pallets: 2 size of pallet: 400 x 400 mmmax. workpiece weight: 400 kgmax. workpiecediameter: 630 mmmax. workpiece height: 900 mmchange time of pallets: 6,0 secb - axis: 0,001 °Tool-Presetter:: number of toolpositions: 60 pos.tool taper: MAS BT 40 max. tool diameter: 70 / (140) mmmax. tool length: 400 mmmax. tool weight: 8,0 kgfeeds:: rapid traverse ( X / Y / Z ): 50 m/minfeed speeds: 0 - 50.000 mm/minTipp feed: 0 - 1.260 mm/mintotal power requirement: 35 kVAweight of the machine ca.: 9,8 tdimensions of the machine ca.: 5,5 x 3,5 x 2,8 mDocuments: Chip conveyor: Coo ...

bore capacity in steel (diameter): 55 mmarm length: 2500 mmworkpiece height max.: - mmtotal power requirement: 8 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4 x 1 x 3 mRadial drilling machine MK 5Spindle holder MK 5Speed range 30 - 1500 min-1Feed rates 0.05 - 0.6 mm/revSpace requirement approx. 3.7 x 1 x 3 mWeight approx. 5 tonnes (estimated)Working range: MK 5 x 2500Drive: 3.7 / 6Sonderpreis 2.900,-- EXW / ab Fundament - SelbstabbauListenpreis 4.900,-- frei LKWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 460 x 460 mmturning speeds: 75 - 3200 U/minengine output: 1,5 kWcolumn diameter: 125 mmthread: M16 ST60feed: 0,10/0,18/0,26 mm/Udimensions: 800 x 500 x 2200 mmweight: 350 kg- automatic drill feeds (magnetic clutch)- Height adjustable and angle adjustable table- Movable work table- Integrated cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmcontrol: MSX 501 Mori Seikiwork table:: table surface area: 700 x 450 mmmax. table load: 350 kgnumber of T-slots: 4 T-slot - width: 18 mmT-slot - distance: 100 mmMain spindle: Number of revolutions: 12.000 U/minpower capacity - main spindel: 18,5 / 15 / 11 kWtool taper: BT 40 max. Torque: 110,5 Nmdiameter of forward milling spindle bearing: 70 feeds: rapid travel x/y/z: 20.000 mm/minfeed speeds: 1 - 20.000 mm/minTipp feed: 15 Steps / 0 - 1.260 mm/minTool-Presetter:: Number of Toolpositions in magazine: 40 Pos.Max. mould width: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 250 mmmax. tool weight: 8 kgchange-time chip to chip: 2,8 secchange-time tool to tool: 1,0 sectotal power requirement: 34 kVAweight of the machine ca.: 7,2 tdimensions of the machine ca.: 2,8 x 3,0 x 2,9 mDocuments: Chip conveyor: triple signal light: ...

Horizontal CNC machining center for milling, drilling, boring and tapping operations on the same workpiece, with automatic pallet exchange. The horizontal design promotes rigidity, productivity, and chip evacuation. OKK HM600 machine, serial no. 444, manufacturing no. MA75865. BT50 spindle according to JIS B6339, 7/24 taper. Dimensions marked: Ø69.85 mm, 136.8 mm, 146.8 mm, 38 mm. Maximum tool carrier load: 20 kg. Power supply: AC380V, 3 phases, 50 Hz, effective power 76 kVA, current 115 A / 133 A, interrupting capacity 18 kA, electrical diagram E61-0679/A. Visible equipment: BIG-PLUS spindle system, Renishaw OMI-2 probing system, HABOR HBO-V2RPTSBM5 oil cooler (3PH 200-220V, 3750W, 75L tank, R410A, weight 185 kg). Auction-ID: A1-49171-5

table length: 3000 mmtable width: 4000 mmtable load: 80 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 11500 mmy-travel: 4500 mmw-axis: 1600 mmz-axis: 2000 mmspindle diameter: 200 mmRotary table: E25OB23941 2.000x 2.000 mmbed length turntable: 4600 mmtool taper: SK50 : 80 tPlate field size: 10.000 x 15.000 mmtool taper: SK 50 total power requirement: 83 kWweight of the machine ca.: tincl. 15 plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 3983 : prompt, Zwischenverkauf v : Spanien : 7400 €: 142.82 €: 1 : 1 : 32 mm: MK 3 : 250 mm: 65 - 125 - 185 - 365 - 54 U/min: 1,8 / 2,6 kW: M24 : 600 mm: 640 mm: 2020 mm: 260 kg: 100 mm: 85 - 635 mm: 1.170 mm: 300 x 270 mm: 600 x 380 mm: 120 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machinemanual feedleft-right drillingtable with t-slotsdepth adustable endtool ejectordrill guardCE normsuser manual in GERMAN(sample photo)OPTIONS (PRICES ON REQUEST):lighting equipmentcoolant equipment and machine base with T-slotsreverse for tappingDELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 4 / 6 mmturning speeds: 650 - 12.000 U/mintable surface area: 180 160 mmspindle cone: B 10 bore stroke: 50 mmtotal power requirement: ? kWweight of the machine ca.: 50 kgdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 11530 €: 221.38 €: 40 mm: MK 4 : 300 mm: 75 - 150 - 235 - 325 - 47 U/min: 1.3 kW: Stahl: M 30, Guss: M 32 : 600 mm: 640 mm: 2020 mm: 305 kg: 0,1 — 0,2 — 0,3 mm/U: 160 mm: 125 mm: 420 x 400 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machine2 aut. feedsleft-right drillingdrill guardCE normsuser manual in GERMANOPTIONS (PRICES ON REQUEST): lighting equipment coolant equipment and machine base with T-slots Reverse for TappingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 28 / 19 kWmax. Torque: 121 Nmtool taper: HSK-A 63 swivellable: B: +30° / -120 °NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mmmax. table load: 650 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 2x16 pos.tool taper: HSK-A 63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool weight: 8,0 kgmax. tool length: 315 mmfeeds:: feed speeds: max. 30.000 mm/minrapid traverse: 30 m/mintotal power requirement: 48 kVAweight of the machine ca.: 14,0 tdimensions of the machine ca.: 4,5 x 4,0 x 2,6 mDocuments: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: Rotary screen: Signal lamp - 4 colour: 3D quickSE ...

bore capacity in steel (diameter): 40.0 mmthroat: 293 mmbore stroke: 140 mmmorse taper: 3 Kurzspindel MKtable:: 420 x 350 mmturning speeds: 160 - 2250 U/mincolumn diameter: 115 mmthroat: 293 mmdistance spindle /table: min 117 / max 701 mmT-slots: 2 x 14 x 224 total power requirement: 1.45 / 1.90 kWweight: 370 kgdimensions of the machine ca.: 1200 x 800 x 1840 mm Current list price ~ 12.500 euros Special price available upon request Features:- Sturdy column drill press (V-belt)- stepless speed adjustment - pole-changing drive motor - height-adjustable worktable with 2 T-slots - R/L rotation of the drill spindle (reversing switch)- Main switch with motor protection switch- Mushroom-head pushbutton (latching) for EMERGENCY STOP - Operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 28 / 19 kWmax. Torque: 121 Nmtool taper: HSK-A 63 swivellable: B: +30° / -120 °NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mmmax. table load: 650 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 2x16 pos.tool taper: HSK-A 63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool weight: 8,0 kgmax. tool length: 315 mmfeeds:: feed speeds: max. 30.000 mm/minrapid traverse: 30 m/mintotal power requirement: 48 kVAweight of the machine ca.: 14,0 tdimensions of the machine ca.: 4,5 x 4,0 x 2,6 mDocuments: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: 5 Axis CNC - MachiningCenter UniversalDECKEL MAHO - ...

x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmcontrol: SLIMline SiemensMain spindle:: turning speed range - main spindle: 20 - 12.000 min/-1power capacity - main spindel: 13 / 9 kWTorque: 83 / 57 Nmtool taper: SK 40 work table:: table surface area: 790 x 560 mmnumber of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mmT-slot - distance: 100 mmmax. table load: 600 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6 kgTotal weight, approx.: max. 60 kgfeeds:: feed speeds: max. 20.000 mm/minrapid traverse: 30 m/mintotal power requirement: 17 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 4,0 x 2,8 mDocuments: Chip conveyor: Coolantsystem: through spindle coolant: 12 bar test probe: Renishaw OMP 40-2 Renishaw: OTS /  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 7401.09 €: 142.84 €: 20 mm: MK 3 : 260 mm: 30 - 3000 U/min: 1,5 kW: M12 : 430 mm: 715 mm: 1800 mm: 290 kg: 115 mm: 110 mm: 230 - 850 mm: 420 x 340 mmDrilling capacity / normal drilling Performance 20/23 (in E335/ST60)Main switchThread cutting deviceControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with CEE plug3 years warranty for single shift operationOPTIONS (PRICES ON REQUEST):Drill package 3 (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: TNC 426M HeidenhainMain spindle:: turning speed range - main spindle: 20 - 9.000 min/-1power capacity - main spindel: 9 / 13 kWmax. Torque: 57 / 82 Nmtool taper: ISO 40 DIN 69871swiveling-rotary-table:: table diameter: 700 x 500 mmswivellable: B: 105° (-10°/+95°) man.rotatable: 360° man.max. table load: 200 kgnumber of T-slots: 7 T-slot - distance: 63 mmT-slot - width: 14H7 mmcenter hole: 30H7 mmTool-Presetter:: number of toolpositions: 16 pos.tool taper: ISO 40 DIN 69871max. tool length: 290 mmmax. tool weight: 6,0 kgmax. total weight: 50 kgfeeds:: feed speeds: max. 10.000 mm/minrapid traverse: 12 m/mininput unit: 0,01 mmtotal power requirement: 17 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 4,0 x 4,0 x 2,5 mDocuments: Chip-Tray: Coolantsystem: B-axis: man. C-axis: man. Swivel-Rotary-Table: Automat ...

plate width: 3000 mmplate depth: 2000 mmplate height: 200 mmweight of the machine ca.: 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 55.0 mmthroat: 300 mmbore stroke: 140 mmmorse taper: 4 MKtable:: 615 x 430 mmturning speeds: 70 - 1200 U/mincolumn diameter: 145 mmthread: M 30 ST60thread: M 36 GG20feed: 0.10 + 0.30 mm/Udistance spindle /table: 150 / 735 mmengine output: 1.8 / 2.9 kWweight: 380 kgMachine height: 1850 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools).- auto ...

Boring power: 16 mmtable-size: 280 x 360 mmquill stroke: 120 mmtotal power requirement: 0,8 kWweight of the machine ca.: 350 kg- Manufacturer: Chemnitzer Maschinenbau GmbH Chemnitz- speed (stepless): 460 - 1840 U/min , 140 - 560 U/min- Table dimensions: 280 x 360 mm- Adjustment travel table: 540 mm- Holder: MK 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 2292.56 €: 10 mm: B 16 : 220 mm: 250 - 3000 U/min: 0,45 kW: 320 mm: 520 mm: 820 mm: 44 kg: 60 mm: 140 - 315 mm: 300 x 250 mm: 70 mmDrilling capacity / normal drilling Performance 10/12 (in E335/ST60)Robust, high quality and inclined rotation hood for easy speed readingLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionUndervoltage releaseDrill protection with electr. FuseConnection cable with Schuko plug (1.2 m)3 years warranty for single shift operationArt. - No. 217.400 with drill head height adjustmentOPTIONS:Machine cabinet with door and drawerDrill package 2 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, RAM POWER pressure amplifier from a Mikron VC500D CNC machining center -Type: 152 284 4 RP 9813 -Individual components: see photos -Transport dimensions: 580/215/220 mm -Weight: 12.6 kg