boring mills and machining centers used for sale (3,250)

- Spindle SK 40- Speeds 8000 Rpm with 165 Nm- Workload 2000 Kg- ATC 56 Positions- Hours spindle 10.304- Closed housing with automatic top door- IKZ Coolant system- LTA Air Cleaning

CONTROLS  CNC controls FANUC 310 IS WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 5   X-axis travel: 600 mm  Y-axis travel: 410 mm  Z-axis travel: 460 mm  rotating range A-axis from: -30 °  rotating range A-axis up to: 120 °TABLE  clamping surface diameter: 350 mmSPINDLE / HEAD  spindle revolutions (max): 12000 /min  drive power: 18 kWAXIS DRIVES  rapid traverse: 4800 mm/minTOOL MAGAZINE  number of positions: 30 DIMENSIONS / WEIGHTS  space requirements -left/right-: 3000 mm  space requirements -front/back-: 2400 mm  total height: 1980 mm  total weight approx.: 7500 kgOperating hours: 35`000hInklusieve: Vices see picture

A CNC vertical machining center Fadal with increased torque is available. Travel X/Y/Z: 1140mm/635mm/61mm, table dimensions X/Y: 1350mm/635mm, rapid traverse X/Y: 25m/min, rapid traverse Z: 17m/min, max. feed rate: 15m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.0015mm, spindle speed: 10000rpm, tool interface: SK40, max. spindle torque: approx. 360Nm, tool stations: 24. Machine dimensions X/Y/Z: approx. 3300mm/2600mm/3050mm, weight: approx. 6000kg, control: Siemens. Documentation available. On site inspection is possible.

Cincinatti Machining Center, 2 Available: Arrow/Milacron 500, built in 1995 & 2000 Technical data: Travel (X / Y / Z) 510 mm / 510 mm / 510 mm Work table (L × W) 700 × 520 mm Maximum table load / workpiece weight approx. 350 kg evenly distributed Tool changer (tool magazine) 21 tool positions Spindle holder / tool holder SK 40 Spindle speed (min–max) 60 – 6000 rpm (sometimes specified for newer variants up to 8000 rpm) Machine weight approx. 3050 kg (≈ 3 t) Dimensions approx. 2000 × 2650 × 2700 mm (L × W × H) Number of axles 3-axis CNC

Key data: 630 mm, 1100 mm, 600 mm

Clamping area: Ø700 x 500 mm Rapid traverse X/Y/Z: 60/60/56 m/min Milling spindle Max. spindle speed: 18,000 rpm SK-40 Other equipment Air on the workpiece Cooling by the spindle, 70 bar Renishaw RMP 600 Probe F) Tool tip control 5-axis simultaneous machining Tool radius compensation – 5-axis simultaneous Drilling cycle with torque-dependent chip breaking G00 slope constant Synch. Threading Cylinder interpolation EIA Dynamic Compensation 2 (included 1) KNOLL Coolant System KF200/1250 Paper Belt Filter 70 bar high-pressure pumoe KNOLL Chip Conveyor 640-S-1

Key data: 45 mm, 800 mm

Radial drilling machine ALZMETALL - AB 30 R Projection 800 mm Drilling spindle holder MK 4 Drilling capacity in steel 45 mm Tapping device - up to M30 Drilling spindle stroke 160 mm Spindle speeds: 8 steps, 56 to 1,250 rpm Tapping levels 4 - 0.15 / 0.2 / 0.3 / 0.35 mm/rev Clamping cube with T - grooves 550 x 480 x H - 500 mm Machine vise on turntable - jaw width 200 mm Space requirement 1,600 x 700 x H - 2,250 mm Weight 1,370 kg

x-travel: 660 mmy-travel: 500 mmz-travel: 600 mmtable surface area: 630 x 500 mmspindle taper: SK 40 spindle turning speed range: 20 - 6.300 U/minfeeds: 30 m/mincontrol: PHILIPS CNC 532 internal coolant system feed: 40 bartotal power requirement: 50 kWweight of the machine ca.: 13,3 twith rotary pallet changer and hydr. swivelling head (horiz./vert.)Accessories: chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1500 mmy-travel: 650 mmz-travel: 650 mmsize of pallet: 1740 x 650 mmspindle taper: SK 50 spindle turning speed range: 25 - 6000 U/minfeeds longditudinal/cross/vertical: max. 8 mm/minrapid traverse longitudinal and cross: 26 m/minrapid traverse vertical: 20 m/minspindle throat: 665 mmdistance spindle nose and table: 200 / 850 mmdrilling in full material: 50 mmøthreading: M 45 ATC: 60 Postool diameter: 125 mmwotkpiece diameter with 2 vacant positions: 260 mmworkpiece length: 400 mmweight of tools max.: 20 kgspindle drive: 18,5 kWcontrol: MAZATROL M PLUS Accessories: chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2135 mmy-travel: 865 mmz-travel: 762 mmtable surface area: 2185 x 865 mmtable load: 2,3 tspindle taper ISO: 40 turning speeds: 12.000 U/mintool magazin:: 90 x total power requirement: 30 kWweight of the machine ca.: 18 tdimensions of the machine ca.: 6 4 3,5 mPacking: 13 x 3,4 x 3,3 mSpecial price for EXW takeover ex FoundationMovie : https://www.youtube.com/watch?v=ilCAzBDhCRo The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 1.050 mmtravel -y axis: 570 mmtravel -z axis: 510 mmcontrol: HEIDENHAIN - TNC620 number of spindle speeds: 12.000 U/mintool taper: BT 40 table dimension (L x W): 1300 x 570 mmnumbers of positions in the tool changer: 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor.The machine only has 13.600 spindle hours.The machine is in a well-maintained condition and has exclusively workedon Aluminum and Plastics.The machine video from the production plant will be shared on request.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DNM5700 | DNM-5700The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8930 Type: DMC 635 V eco Producer: DMG Created: 2008 Parameters: Control system: Siemens 810D Work table length: 790 mm Work table width: 560 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 635 mm Y-axis travel: 510 mm Travel travel Z-axis: 460 mm Machine weight: 4500 kg

Inv. Num. : 8929 Type: DMC 635 V Producer: DMG Created: 2007 Parameters: Control system: Heidenhain iTNC 530 Work table length: 790 mm Work table width: 560 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 635 mm Y-axis travel: 510 mm Travel travel Z-axis: 460 mm Machine weight: 4500 kg

Key data: 700 mm, 420 mm, 380 mm

Highly Dynamic Vertical Drilling and Tapping Center / 5-Axis Vertical CNC Machining Center DMG Mori DMP 70 With maximum milling performance Year of construction 2023 Siemens 840D solutionline 2-axis NC rotary and swivel table C-axis 360° torque motor C-axis 360° A-axis -120°/+100° Table diameter 290 mm Table load max. 100 kg X = 700 mm Y = 420 mm Z = 380 mm Feeds and rapid traverses X,Y,Z up to 60,000 mm/min. Spindle holder BBT 30 BIG PLUS Spindle drive power 4/6/20 kW Spindle speeds max. 24,000 rpm. Spindle torque max. 40 Nm 25 tool magazine slots Equipped with: Swivel Joint - Deh Feedthroughs with 4 Channels Software package Job Shop and Sinumerik MDynamics 5-axis Data storage expansion 6 GB flash card ShopMill Chip conveyor Paper filter for coolant Spindle cooling 40 bar Workpiece measuring system BLUM TC52 BLUM Z-Nan ...

Vertical Machining Cenre DUGARD EAGLE 1500

CONTROLS  CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 5   X-axis travel: 200 mm  Y-axis travel: 200 mm  Z-axis travel: 280 mm  rotating range A-axis from: -10 °  rotating range A-axis up to: 130 °  rotating range C-axis from: 0 °  rotating range C-axis up to: 360 °SPINDLE / HEAD  spindle revolutions (min): 3000 /min  spindle revolutions (max): 42000 /min  tool fixture: HSK E32 TOOL MAGAZINE  number of positions: 60 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2200 mm  space requirements -front/back-: 3700 mm  total height: 2400 mmEquipment:- Renishaw  ...

bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 132-1852 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: FANUC Prof 3/A rapid travel x/y/z: 30000 mm/minpalets changer: 630 x 630 table weight: 1200 Kgspindle speed:: 14000 U/minspindle taper: HSK A 63 spindle motor: 30/25 kWtool change unit: 40 posdistance spindle center to table: 100-850 mmInternal cooling system: weight of the machine ca.: 17 tdimensions of the machine ca.: 7,9 x 4,2 x 3,3 mEquipped with:- Fanuc Professional 3/A CNC control- Coolant through spindle- Pallet changer- Tool changer (HSK-A63)- Knoll coolant system (renewed)- Chip conveyor- Mütek briquette press (2015)The machine has been used reliably in single-shift operation in recent years, operating hours: Spindle hours:The scope of delivery includes numerous HSK-63 tool holders – both thosecurrently in the machine and a complete Euro pallet withadditional tool holders.- Two clamping towers (without pallets)The  ...

Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.

: 95 mmShort spindle: MK 2 spindle turning speed range: 100 - 4200 UpMthroat: 200 mmfeed: von Hand weight of the machine ca.: 81 kgOverall size: 650x300x850 mmStandard equipment:- Number of speed ranges 10 steps- Movable LED machine light- Swivel work table +/- 45 degrees- Mains cable and plug ready for immediate use- Drilling table adjustable via gear rack- Depth stop with scale- Emergency stop- In accordance with current CE conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 15 mmthroat: 220 mmbore stroke: 80 mm: 2 speeds: 320 - 1600 U/mintable-size: 350 x 285 mmweight: 125 kgdimensions: 700 x 600 x 1500 mmFeatures:- Microdosing- Thread cutting M2-10The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 105 mm, 2500 mm, 1850 mm

CNC Heidenhein TNC 124 table 1750 mm x 2000 mm spindle dia. 105 mm x - 2500 mm, y - 1850 mm, z- 1400 mm, w - 700 mm

Technical data: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

Offer 25498 Technical data: - Drilling capacity 50 mm - Tapping device up to M 40 mm - Tool holder MK 5 - Spindle stroke 280 mm - Spindle speeds 38 - 2000 rpm - 6 feed speeds 0.08 - 0.83 mm/rev - Drive 400 V / 5.5 kW - Radius min. / max. 350 / 1400 mm - Removal of spindle - machined base plates - min / max 350 / 1250 mm - Machined base plate with T-slots W 1650 x D 930 mm - electr. Central clamping - Coolant device + lighting - Dice table - Space requirement approx. W 2300 x H 2400 x D 1050 mm - Weight approx. 3500 kg

bore capacity in steel (diameter): 23 mmthroat: 220 mmbore stroke: 120 mmNumber of revolutions: 25 - 3.200 U/mindistance Spindlenose and center of table: 275 mmtable surface area: 300 x 355 mmT-slots: 3x T - slots distance: 120 mmcolumn diameter: 110 mmtotal power requirement: - kWweight of the machine ca.: ca. 120 kgdimensions of the machine ca.: 0,8 x 1,0 x 1,9 mTable Drilling MachineIXION - BT 23 ST- incl. base cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mmthroat: 220 mmbore stroke: 110 mmtaper MK: 3 MKtable-size: 350 rund mmfeeds: mm/Uturning speeds: 100 - 2080 U/minconnected load frequency: 400 Vtotal power requirement: 0,9 KWweight of the machine ca.: 0,2 tdimensions: 0,8 x 0,6 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 51 - 1000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mHigh-speed radial end mill with- Thread cutting attachment- Vertical table 750 x 620 mm- Horizontal table 1200 x 510 mm- Emergency stop device- DocumentationMachine-No. 445The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 / 23 mmthroat: 320 mmbore stroke: 180 mm: 4 speeds: 30 - 765 U/mintable-size: 720 x 550 mmweight: 480 kgdimensions: 750 x 900 x 1900 mmEquipment:- Multi-spindle head, drill Ø 23 mm- automatic feed- coolant device- infinitely variable speed- adjustable drilling depth stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1270 mmy-travel: 508 mmz-travel: 635 mmcontrol: Haas total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.