presses used for sale (1,713)

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10000 €: 193 €: 100 to: horizontal verschiebbar : 300 mm: 1570 mm: 220x160 mm: 5 mm/s: 10 mm/s: 2630 mm: 1000 mm: 2430 mm: 1600 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 7307 : prompt, Zwischenverkauf v : Italien : 11400 €: 197.76 €: 1 : 10300 €: 100 to: horizontal verschiebbar : 500 mm: 900 mm: 1050 mm: 25 mm/s: 2 mm/s: 2 kW: 1900 mm: 1000 mm: 2400 mm: 1250 kg: 650 mmSTROKE 500 MM2 speedsmachine table can be liftet with chainscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 €: 1965.6 €: 125 to: 500 mm: 1200x700 mm: 600 mm: 115 mm/s: 7 mm/s: 70 mm/s: 15 kW: 2550 mm: 1500 mm: 2600 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATS 585 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmFurnishing:- NC controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control ATS 560 Positioning of the backgauge (X axis) Depth setting positioning (Y1+Y2 axis) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, left front- electric back gauge (X axis) with 2 stop fingers, manually adjustable (R+Z axis)- System A tool holder - with cambered upper wedge- Split insert/bending tools- side protection grids- rear protection- free-moving double foot switch- Operation manualThe d ...

Hydraulic press line for deep drawing and forming processes with multiple presses and automated part handling. Manufacturer: Fritz Müller / Schuler Machine Type: Hydraulic Press Line / Heat Press Number of presses: 6 Press 1 Type: BZE 1200 – 35.1.1 Year of Make: 1972 Press force: 12000 kN Press 2 Type: ZE 800 – 35.1.1 Year of Make: 1969 Press force: 8000 kN Press 3 Type: ZE 800 – 35.1.1 Year of Make: 1969 Press force: 8000 kN Press 4 Type: ZE 800 – 35.1.1 Year of Make: 1969 Press force: 8000 kN Press 5 Type: ZE 800 – 35.1.1 Year of Make: 1969 Press force: 8000 kN Press 6 Type: ZE 800 – 40.3.1 Year of Make: 1993 Press force: 8000 kN Max. workpiece size: 3500 x 2200 mm Tool weight max.: 32000 kg Material thickness: 0.5 – 2.5 mm Max. drawing depth: 430 mm Documentation: No digital data available Drawings: Some available as ink draw ...

pressure: 40 tthroat: 230 mmstroke: 4-100 mmtable surface area: 650x450 mmram surface: 420x220 mmram - range of adjustment: 85 mmhole in the table: 170x220 mmtable height: 800 mmno. of strokes: 60 Hub/mindayligth: 375 mmDimensions (HxWxD): 2800x1200x1900 mmweight of the machine ca.: 3,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: 300 mmstroke: 8-110 mmno. of strokes: 100 Hub/minram - range of adjustment: 75 mmtable surface area: 750x590 mmram surface: 540x400 mmhole in the table: 200x200 mmtable height: 780 mmtool hole in ram: Ø 40 mmtotal power requirement: 11 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 1200x1700x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  conventional PRESS FORCES  total force (nominal): 75 toPRESS TABLE  table surface (left-right): 1250 mm  table surface (front-back): 1110 mmSLIDE  table surface (left-right): 960 mm  table surface (front-back): 750 mmSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke adjustment: yes   stroke min.: 10 mm  stroke max.: 50 mm  stroke rate (min.): 120 /min  stroke rate (max.): 600 /minSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 300 mmELECTRICAL SPECIFICATIONS  total power consumption: 15.5 kWDIMENSIONS / WEIGHTS  total weight approx.: 13500 kgATTACHMENTS (PRESSES)  strip feeder: yes   feeder type: roll feeder

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Sold with 3 tool cabinets (2 x 50/100/190 cm and 1 x 90/100/190 cm) with contents. Auction-ID: A1-46437-189

pressure: 400 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcontrol: CYBELEC ModEva 10 S total power requirement: 47 kWweight of the machine ca.: 30.400 kgdimensions of the machine ca.: 6000x3000x3450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 46600 €: 890.06 €: 30 to: 200 mm: 500x380 mm: 700x450 mm: 400 mm: 54 mm/s: 18 mm/s: 90 mm/s: 7.5 kW: 1680 mm: 850 mm: 250 mm: 2950 kg2-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 78000 €: 1474.2 €: 85 to: 500 mm: 900x600 mm: 600 mm: 105 mm/s: 7 mm/s: 58 mm/s: 7.5 kW: 2250 mm: 1150 mm: 2400 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing tool, clamping pad, square profile, support profile, alignment pad -Square profile: clamping base, support profile, alignment base -Length: 503 mm -Number: 2x profile available -Price: per piece -Dimensions: 503/97/80 mm -Weight: 27.5 kg/pc.

Pressing tool, sheet metal former, forming tool, straightening tool -Pressing tool: Mounting: Ø 40 mm -Material: 1.2379 X153CrMoV12 cold work steel -Dimensions: 116/83/H340 mm -Weight: 15.6 kg

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 €: 3109.05 €: 260 to: 500 mm: 1400x1000 mm: 600 mm: 75 mm/s: 5 mm/s: 60 mm/s: 22 kW: 2800 mm: 1650 mm: 2750 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing tool, sheet metal former, forming tool -Pressing tool: Edge tool -Angle: 90° -Length: 155 mm -Hole: Ø 40 mm -Dimensions: 155/155/H285 mm -Weight: 17.8 kg

Pressing tool, clamping pad, square profile, support profile, alignment pad -Square profile: clamping base, support profile, alignment base -Length: 515 mm -Number: 3x profile available -Price: per piece -Dimensions: 515/97/80 mm -Weight: 28.3 kg/pc.

Pressing tool, clamping pad, square profile, support profile, alignment pad -Square profile: clamping base, support profile, alignment base -Length: 492 mm -Number: 7x profile available -Price: per piece -Dimensions: 492/97/80 mm -Weight: 27 kg/pc.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 80100 €: 1513.89 €: 60 to: 350 mm: 550?850 mm: 600?1000 mm: 600 mm: 100 mm/s: 10 mm/s: 165 mm/s: 11 kW: 1950 mm: 1900 mm: 2850 mm: 5350 kg: 170 bar: 24 to: 150 mm: 100 mm: 156 bar: 65 mm/sec.: 470?650 mmlight curtaincushionmanual and automatic workingmanual stroke adjustment by camshaft switchmaintenance free self lubricating 4-fold ram guidingpolster plate with T-slotsaccording to ",CE", rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Millutensil BV 30 ERGYear of manuf. : 2022 Control : Siemens Simantic HMI ____________Description:In Generel:Table dimensions:1,500 x 1,000 mmMax. clamping force:500 kNMax. load capacity top plate:2,500 kgMax. load capacity under plate:7,000 kgRG version:plate can be pulled out and tilted:

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 70300 €: 1328.67 €: 100 to: 4.5 mm: 700 mm: 1000 mm: 210 mm: 1 - 132 mm: 58 1/min: 6 : 90 mm: 60 mm: 300 mm: 445 mm: 7.5 kW: 1650 mm: 1545 mm: 3011 mm: 7000 kgWelded steel construction body frameCrankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precisionSnBz-12 quality bronze to bearings, grinded for min surface resistanceRam supported from 6 sidesPneumatic counter-balancing of the ram7", touchscreenGears in oil bathPneumatic clutch-brake combinationPLC control for safetyPhotocell light barriersMotorized slide adjustableMechanical overload fuseTwo hand and foot pedal controlAdjustable stroke (inverter)automatic centrallubricationMachine and equipment in conformity with CE-regulationsOPTIONS: vibration pads € 192,00 bolster plate € 2.580,00The data for this ad was created with ModulMWS - the software solution ...

: neu : 2024 : 7305 : prompt, Zwischenverkauf v : Italien : 46400 €: 886.24 €: 1 : 100 to: 500 mm: 700 x 350 mm: 800 x 600 mm: 500 mm: 300 mm: 25 mm/s: 4 mm/s: 4 kW: 1900 mm: 1200 mm: 2600 mm: 2100 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualincl. pressure switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.