boring mills and machining centers used for sale (3,251)

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:12.000 1/mintool taper:SK 50 control:SIEMENS 840D shopmill tool change unit:240 fachsize of pallet:630 x 630mm mmspindle:52 kW / 430Nm total power requirement:87 kVAweight of the machine ca.:15 tdimensions for transport:4,6 x 2,95 x 2,7 mhorizontal machining center,NC-round-table pallet-changer (2 pallets),Internal Coolant Supply 40 bar,prepared for Infrared Touch Probe Renishaw MP 10 without probe,tool-breakage control (mech.),MQL,airblast through spindle,oilmist suction,TRANSMIT funbction,accuracy package,mode 4,glass window right door,incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 palletsapprox. 98.500 h main switch on apprax. 45.500 Spindle hours

x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:HEIDENHAIN iTNC 530 table load capacity:800 kgtool taper:HSK 63 turning speeds:16.000 1/minspindle:35 / 25 kWtable-size:770 mmmax. torque on the spindle:160 / 223 Nmtool change unit:120 (2x60) Pos.weight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m5-axis simultaneously machining center with controlled swivel-rotary table (A/B-axis),milling head horizontal,internal coolant device (10-80bar),oilmist-suction,electromech. tool-length measuring device GROB,chipconveyor,3D touch probe,KINEMATICOPT,BLUM laser,el. handwheel,hour meter: approx. 82.000 h "machine on", approx. 48.800 h "spindle on"

x-travel:500 mmy-travel:400 mmz-travel:330 mmcontrol:FANUC 31i B5 tool change unit:21 fachrapid traverse in x-y-z axis:54 m/mintaper ISO:BT 30 turning speed range::10.000 1 / minspindle drive:11 / 3,7 kWmax. table load:300 kgsurface area:600x 400 mmDimensions (L/W/H):1,6 x 2,1 x 2,25 mrapid traverse:48 m/mintotal power requirement:11 kVAweight of the machine ca.:2,1 tvertical CNC-milling-drilling machining center,Infrared Touch probe,el. handwheel,autom. door on right side,no internal Coolant Supply,Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"

x-travel:1.250 mmy-travel:710 mmz-travel:710 mmtable surface area:1500 x 800 mmtable load capacity:800 kgturning speeds:12000 1/minspindle drive:15 / 10 kWcontrol:MILLPLUS iT HEIDENHAINspindle taper:SK 40 tool change unit:60 Pos.capacity:44 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:3,5 x 2,65 x 2,65 m5 axis simultaneously machining center,B-axis (-120° / +30°),NC-rotary-table integrated in rigid table,direct measuring system,3D probe infrared, HEIDENHAIN TS 640,internal coolant supply 40 bar, 600l,flushgun,chipconveyor,mode 4,3D quickset software (no hardware),Higher noise in rush on X-axis and roundtable approx. 48.500 hours "machine on" / approx. 18.000 hours "spindle on"

Bench drill - rotatable and swivelDrilling capacity in steel 25 mmProjection 180 mmDrilling stroke 80 mmSpeed 200 - 2440 rpmTable 280 x 245 mmConnection voltage 400VoltTool holder MK2 Machine weight approx. 75 kgDimensions L x W x H 0.6 x 0.4 x 0.95 m

x-travel:700 mmy-travel:420 mmz-travel:380 mmcontrol:SIEMENS 840D sl tool change unit:15 fachtaper ISO:BBT 30 turning speed range::10.000 1 / minrapid traverse:60 m/mindiameter of tools max.:80 mmmax. tool length:250 mmmax. tool weight:3 kgfeed power:5.000 Nchange-time chip to chip:1,5 secDimensions (L/W/H):3 x 2 x 2,6 mtotal power requirement:22 kVAweight of the machine ca.:4,1 t3 axis simultaneously milling-drilling machining center,table 840 x 420mm,direct measuring system,airblast outside,NANO package (higher temperature stability),TROPICAL package (up to 50°C),PROGRESSline,BDE interface,el. handwheel,RENISHAW touch probe OMP 40-2table touch probe,prepared for handling-system incl. autom. door left site,prepared for hydr. interface,internal Coolant Supply 40bar, 400l,airblast,chipconveyor (dropping height 1.050mm,el. keysystem incl. key,Approx. machine on: 22.500h spindle on: 8.5 ...

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping...

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,

Unused, handbook available

x-travel:410 mmy-travel:610 mmz-travel:500 mmturning speeds:15000 1/mintool adaptor:SK 40 control:iTNC 530 HEIDENHAIN smart NC table::320 x 320 mmtable load:100 kgtool change unit:48 Pos.total power requirement:35 kVAweight of the machine ca.:7,4 tdimensions of the machine ca.:4,15 x 3,8 x 3,28 m5-axis simultaneously machining center,NC-round-swivelling table, C-axis 360°, B-axis +30/-120°,chipconveyor,3D touchprobe,internal coolant supply 20bar,el. handwheel,kinematicsopt,meter readings:approx. 9.600h "machine on", approx.3.500h "spindle on"

x-travel:2300 mmy-travel:1200 mmz-travel:600 mmturning speeds:30-10.000 1/minmax. torque on the spindle:254 / 159 Nmcontrol:HEIDENHAIN TNC 430 tool taper:SK 40 tool change unit:60 Pos.spindle:40 / 25 kWfixed working table:surface area:1.100 x 1.100 mmrotary table:1.100 x 1.100 mmrapid traverse:30 m/mintotal power requirement:69 kVAweight of the machine ca.:20 tuniversal machining center with indexing head (2,5°),NC-rotary table, max. table load 1.500kg,internal coolant supply 30 bar, paper filter,el. handwheel,chipconveyor,automatic doors,flush gun,no touch probe available,approx. 81.400 h main swich onapprox. 72.200 h control onapprox. 26.700 h program running on machine under power , for functional testing

x-travel:750 mmy-travel:600 mmz-travel:520 mmtable surface area:D 700 x 500 mmturning speeds:42.000 1/mintool taper:HSK E50 control:HEIDENHAIN iTNC 530 tool change unit:60 pos.rapid traverse:50 m/mintable load capacity - central/maximum:350 kgtotal power requirement:50 kVAweight of the machine ca.:9 tdimensions of the machine ca.:3,2 x 2,65 x 2,8 m5-axis simultaneously HSC-machining center,NC-round-swivelling table B-axis 180°, C-axis 360°,chip conveyor,el. handwheel,laser,prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe),mode 4,oilmist suction,spindle chiller,no internal coolant supply,approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in totalmachine in good condition (test report available)

Manufacturer: Hauser Type: OP3 Travel: 400x250x400mm Table: 600x320 Spindle speed: 60-3000 rpm without a distribution table!

x-travel:1000 mmy-travel:610 mmz-travel:600 mmtable-size:1150 x 600 mmtable load capacity:1000 kgrapid traverse X- and Y-axis:24 m/minrapid traverse Z-axis:24 m/minspindle taper::SK 40 spindle turning speed range:10.000 1/minspindle drive:15/22,5 kWtool change unit:30 Pos.CNC-control:SIEMENS 828D operate shopmill distance spindle nose and table:110 / 710 mmweight of the machine ca.:7 tdimensions of the machine ca.:3,2 x 2,2 x 2,7 mvertical machining center,- internal coolant supply 30 bar- chipconveyor- cartridge filter- flat tracks- el. handwheel- prepared for 4th axis- 3D touchprobe RENISHAW OMP 60- indirect measuring system- accessories (approx. 30 pcs. SK 40 toolholders incl. 2 racks, chip tray)approx. 6.000h "spindle on"

travel -x axis:1000 mmtravel -y axis:500 mmtravel -z axis:610 mmturning speed range:8000 1/minweight:5,5 to.control:HEIDENHAIN iTNC 530 tool change unit:24 Pos.Tool bore:SK 40 table-size:1.200 x 500 mmmax. table load:850 kgtotal connected load:37 kWspace requirements approx. LxWxH:2,65 x 2,1 x 2,9 mvertical machining center,internal coolant supply,direct measuring system,prepared for 3D-touchprobe (without touchprobe),chioconveyorapprox. 21.200h "machine on", approx. 1.300h "spindle on"

Unused, handbook available

travel -x axis:1000 mmtravel -y axis:500 mmtravel -z axis:610 mmturning speed range:12000 1/mincontrol:HEIDENHAIN iTNC 530 tool change unit:40 Pos.Tool bore:SK 40 table-size:1.200 x 500 mmmax. table load:850 kgtotal connected load:37 kWweight:6,8 to.space requirements approx. LxWxH:2,65 x 2,1 x 2,9 mvertical machining center,internal coolant supply 20bar,airblast through spindle,direct measuring system,prepared for 3D-touchprobe (M&H PS 25.00),chioconveyorNC-dividing device LEHMANN EA 520 L MA (center height 180mm)approx. 26.000h "machine on", approx. 7.500h "spindle on"

Gear DrillTapping DeviceLeft/Right BarrelTilting Work Table.Lighting. 2 electr. Speed levels. Depth stop . Gears run in oil. Packaging dimensions:2100 x 400 x 710mmWeight 260KgDrilling capacity in steel 30 mmProjection 250 mmDrilling stroke 130 mmSpindle holder MK 3 MKTable: 380 x 380 mmColumn diameter 98 mmSpeed 75 - 3200 rpmFeeds mm/revTotal power requirement 1.1 kWMachine weight approx. 220 kg.Dimensions L-W-H 0.5 x 0.6 x 2.05 mm Condition: never used / new (5)

Unused, handbook available

x-travel:2600 mmy-travel:1100 mmz-travel:900 mmtable surface area:3200 x 1100 mmrotary table diameter:1050 mmtable load:1,2 tcontrol:Heidenhain iTNC 530 ergoline 19" turning speeds:20 - 10.000 1/mintaper ISO:SK 50 max. torque on the spindle:288 / 187 Nmtool change unit:60 Pos.rapid traverse:40 m/minspindle:44 / 32 kWweight of the machine ca.:25 tdimensions of the machine ca.:6,70 x 3,40 x 2,95 m5-axis universal machining center,rigid table with integrated NC-rotary table left side and B-axis in milling head,direct measuring system,internal Coolant 40 bar, coolant tank 600 l,Swarf Conveyer Rotoclearairblast through spindle,3D Touch probe HEIDENHAIN TS 649,mode 4,new milling spindle in 2022 at 25.584happrox. 60.000 h machine ON, approx. 31.000 h Programm ON in total

travel:1300 mmlength:670 mmwidth:625 mmcontrol:Heidenhain TNC 620 spindle turning speed range:12000 1/mintable load:1300 kgtool change unit:40 Pos.spindle taper ISO:SK 40 spindle:17 / 10 kWdimensions of the machine ca.:3,35 x 2,60 x 3,10 mweight:8,5 t:40 kVArapid traverse:36 / 36 / 30 m/minvertical machining center,touch probe RENISHAW OMP 40-2,coolant tank 325 l / incl. 20 bar high pressure pump (internal coolant supply) air through spindle,el. handwheel,oil-mist suction,chipconveyor, flush gun,approx. 13.000h "machine on", approx. 3.000h "spindle on"inspection under power in factory is still possible

x-travel:8500 mmy-travel:2000 mmz-travel:1500 mmrapid travel x/y/z:25 m/mintable-size:10.000 x 1.350 mmtable load:max. 5 t/qmuniversal head:orthogonal 1° x 1° tool taper:SK 50 milling head speed:4.000 1/minpower capacity:37 kWmax. torque on the spindle:900 Nminternal coolant system feed:15 barcontrol:HEIDENHAIN iTNC 530 Tool changer:60 Pos. total power requirement:75 KWdimensions of the machine ca.:12,7 x 5,2 x 4,6 mweight of the machine ca.:35 tuniversal travelling column - universal machining center,orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer)3D touch probe M&H 20.41,dividing wall for 2 table machining,internal air blast,15bar high pressure pump,prepared for HSC milling heads incl. torque support,moveable operator-cabin/panel,chipconveyor,handwheel HR 410,controlled security fence,miscellaneous accessories (angle ...

x-travel:1000 mmy-travel:1100 mmz-travel:810 mmcontrol:iTNC 530 HEIDENHAINturning speeds:18000 1/mintool taper:HSK 63 table surface area:1.000 x 800 mmmax. swing dia.:1350 mmmax. table load:1.000 kgtool magazin::73 Pos.rapid traverse:60 m/mintotal power requirement:86 kWweight of the machine ca.:17 t5-axis simultan universal machining center,NC-rotary-table (C-axis) and B-axis (milling head),DDT-spindle for high torque (HT - max. 3000 rpm) and high speed (HS max. 18.000 rpm),internal coolant supply 50bar with chipconveyor and paperfilter,el. handwheel,oilmist suction,DCM collision control,Hours on counter:approx. 45.000h "machine on", approx. ca. 2.000h " HT-spindle on", approx. ca. 12.000h " HS-spindle on"NEW SPINDLE IN 09/2025 !

Drilling capacity in steel Ø approx. 25 mm (up to ~30 mmdrilling capacity in cast iron Ø approx. 30 mm

Tested for operation Line drilling machine with automatic program bleed Drill spindle chuck ER25 collet

ZGAN Column Drill Machine 230V