boring mills and machining centers used for sale (3,240)

x-travel:1000 mmy-travel:800 mmz-travel:1100 mmweight of the machine ca.:20 tdimensions of the machine ca.:6,80 x 3,0 x 3,20 mTool bore:SK50 Tool taper:HSK-A 100 turning speed range:45-6.000 U/minsize of pallet:630x800 mmchange time of pallets:21 secMechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

x-travel:1000 mmy-travel:800 mmz-travel:1100 mmweight of the machine ca.:15,2 tTool bore:SK50 Tool taper:HSK-A 100 turning speed range:45-6.000 U/minsize of pallet:630x800 mmchange time of pallets:21 secMechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

spindle speed::max. 12000 tool taper:HSK 80 .b-axis:360 x 0,001 °worktool support (A-axis):+40 / -95 °weight of the machine ca.:25 500 Kgs.x-travel:800 mmy-travel:700 mmz-travel:630 mmdimensions of the machine ca.:6200 x 3000 x 3200 mmpallet size::500 x 500 mmno. of tools in the magazine:61 Nos.Weight approx.:23,5 tHorizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition.Single spindle

x-travel:800 mmy-travel:950 mmz-travel:1020 mmweight of the machine ca.:17 tdimensions of the machine ca.:6 x 3 x 3,2 mDiameter of the table:770 mmmax. table load:800 kgtool taper:HSK-A63 max. tool length:465 mmno. of tools in magazin:60 spindle turning speed range:12.000 U/minfeed power:8 kN kppower capacity:25/35 kW5 axisG550-1024 HSK A-63Grob (Bezeichnung G550-1024)1 spindleTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.

x-travel:780 mmy-travel:560 mmz-travel:560 mmweight of the machine ca.:10 tNumber of axles:5 St.spindle turning speed range:20-12.000 U/minnumbers of tools in magazin:30 tool taper:SK 40 surface area:500 x 630 mmRound TableB-AxisTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.

x-travel:700 mmy-travel:630 mmz-travel:700 mmweight of the machine ca.:15 tdimensions of the machine ca.:4,20 x 2,90 x 2,90 mpallet size::500 x 500 mmtool taper:SK 40 Tool taper:HSK-A 63 turning speed range:10.000 U/min

x-travel:2000 mmy-travel:1600 mmz-travel:1140 mmb-axis:0.0001° x 360° °number of pallets:4 table surface area:1000 x 1450 mmmax. table load:6.000 kgturning speed range:4 - 10000 U/minpower capacity at 100 % load:40 kW kWtool taper:HSK100 DIN69893A machine weight ab.:63.000 kgspace required L x W X H:12320 x 11000 x 4700 mmincl. 50 x HSK100 tool tapers

x-travel:760 mmy-travel:760 mmz-travel:760 mmtotal power requirement:43 kWweight of the machine ca.:11,5 tdimensions of the machine ca.:2,7 x 4,73 x 2,87 mmax. table loading capacity:500 kg

table length:2200 mmtable width:2500 mmtable load:16 ttotal power requirement:6,5 kWfeed speeds:1,25 - 160 mm/minrapid traverse speed:2000 mm/minlongitudinal adjustment:1500 mmweight of the machine ca.:12 tdimensions of the machine ca.:4,1 x 2,65 x 0,95 mTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible.

A vertical CNC machining center is offered. Table diameter: 320mm, travels X/Y/Z: 1270mm/660mm/610mm, spindle speed: 16000rpm, tool holder: SK40, number of axes: 4, rapid traverse: 30000mm/min, max. feed rate: 15240mm/min, rotary table spindle bore: 105mm, rotary table center height: 225mm, control system: WINMAX MIL, overall dimensions X/Y/Z: approx. 4750mm/3200mm/3000mm, weight: approx. 9000kg, operating hours: approx. 61762h. Including a Yaskawa spindle motor and Hurco transport equipment. Documentation available. Inspection possible by appointment. Expected to be available from December 2026.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 6840 €: 132.01 €: 25 mm: MK 3 : 250 mm: 245 - 4000 U/min: 0,7 / 1,3 kW kW: M18 : 400 mm: 655 mm: 1900 mm: 280 kg: 120 mm: 100 mm: 85 - 635 mm: 1.195 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEV-belt drivemanual feedleft-right drillingtool ejectoradjustable depth stoptable with T-slotsdrill guard with micro switchlightening equipmentuser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):Variable speed incl. digital display (VE+TAK)Tapping device (IR/RS)Coolant equipment incl. T-slots in the ground plate (ERB)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 51700 €: 977.13 €: 65 mm: MK 5 : 440 - 1.580 mm: 40 - 1.920 (12) U/min: Stahl/Guß: M50/M60 : 2850 mm: 1400 mm: 2940 mm: 4600 kg: 380 - 1.600 mm: 0,07 - 0,96 (6) mm/min: 5.5 kW: 432 mm: 370 mm: 2.480 x 1.050 x 210 mm: 1,5 kW: 700 x 500 x 400 mm: 3170 mm: 0,75 kWleft/right rotationautomatic feeddrilling depth limitmanual headstock adjustment with hydraulic clampingelectric height adjustment of extension arm andhydraulic clampinghydraulicclamping of swivel movement of extension armcentral operation panel on the front sidepower load readout for drilling spindlehand wheel for spindle fine feedcoolant equipmentmachine lampbox tablemachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 2792.28 €: 10 mm: B 16 : 220 mm: 250 - 3000 U/min: 0,45 kW: 320 mm: 520 mm: 820 mm: 44 kg: 60 mm: 140 - 315 mm: 300 x 250 mm: 70 mmDrilling capacity / normal drilling Performance 10/12 (in E335/ST60)Robust, high quality and inclined rotation hood for easy speed readingLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionUndervoltage releaseDrill protection with electr. FuseConnection cable with Schuko plug (1.2 m)3 years warranty for single shift operationArt. - No. 217.410 with intermediate table and table height adjustment via toothed rackOPTIONS:Machine cabinet with door and drawerDrill package 2 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 595 €: 12 mm: 19 mm Weldon : 0.1 kW: 175 mm: 250 mm: 312 mm: 10 kg: 12 mm: 36 mm: 51 mm: 70 mm: 350 U/minThe PRO-36 makes holes up to 36 mm in diameter by using annular cutters. The machine can also drill holes up to 12 mm in diameterby means of twist drill bits with Weldon shank 19mm (3/4’’).Compact design and excellent ratio weight/power make this mag drill a very popular choice for customers.Features &, benefits:• Dual bars guide system ensures extraordinary stiffnessand adjustment free operation• Compact size and ultra-lightweight - ideal for site work• Rugged one piece slide and gear box for extra stability• Purpose designed motor with heavy duty gear box• Maintenance-friendly design makes it easy to use• Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials• Magnetic Power Adhesion Con ...

: neu : 2025 : .00775 : prompt, Zwischenverkauf v : 949.81 €: 1 : 150 mm: 40 mm: 33 kgVice [felix] 2.0 150Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm)Taper mandrel B18/MK IVReducing sleeve MK III/MK IIReducing sleeve MK III/MK IThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : 571.15 €: 120 mm: 40 mm: 200 mm: 33 kg[felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper.The machine vice for freely adjustable clamping of the workpiece.Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted.Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpiecesHardened and precision ground clamping jawsNo additional clamping devices necessaryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1445 €: 19 mm Weldon : 1 kW: 307 mm: 221 mm: 317 mm: 135 kg: 36 mm: 51 mm: 70 mm: 350 U/min: 6 mmNew PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and givesadditional safety and diagnostic information.Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode.The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speedand the range of allowable cutting parameters for a given tool type and hole diameter.It results in extending tool life of both HSS and TCT cutters and enhanced machine performance.Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green)are possible in manual mode only.A safety strap protects ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1595 €: 23 mm: 19 mm Weldon : 1.6 kW: M20 : 266 mm: 259 mm: 500 mm: 17 kg: 23 mm: 50 mm: 75 mm: 190 mm: 160 - 250 / 390 - 580 U/min: 8 mmThe PRO-52T drilling machine is suitable for hole cutting and tapping applications.Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”).Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system.Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality.Intelligent speed control system maintains constant motor speed regardless of changing loads.Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety.Features and benefits:• powerful motor with heavy duty 2-speed gearbox• Ele ...

- Full enclosure with vacuum extraction- Roller shutter door for crane loading- Pick-Up station for 3 angled milling head - Face machining possible to generously sized areas- Distance spil to table 140 - 740 mm- Pendel screen for splitted manufacturing- Coolant tank filtration 350 Liter- HR410 Handwheel HeidenHain- Double LTA Oil Mist -  Flexible, high-precision machining of large and complex parts, with reliable German build quality.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 3649.63 €: 15 mm: MK 2 : 220 mm: 40 - 4000 U/min: 0,75 kW: M12 : 400 mm: 520 mm: 850 mm: 65 kg: 70 mm: 85 - 370 mm: 300 x 250 mm: 70 mmDrilling capacity / normal drilling Performance 15/18 (in E335/ST60) 17 NmThread cutting systemControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomicDrilling depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with Schuko plug3 years warranty for single shift operationOPTIONS (PRICES ON REQUEST):Machine cabinet with door and drawerDrill package (vice &, keyless chuck)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : 257.02 €: 80 mm: 28 mm: 120 mm: 12 kg[felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper.The machine vice for freely adjustable clamping of the workpiece.Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted.Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpiecesHardened and precision ground clamping jawsNo additional clamping devices necessaryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 8970 €: 173.12 €: 30 mm: MK 3 : 250 mm: 65 - 3.060 (8) U/min: 380 mm: 600 mm: 2060 mm: 260 kg: 100 mm: 170 - 660 mm: 1.216 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEHigh quality geardrive machine2 automatical feedLeft-right drillingAutomatic tool ejectorAdjustable depth stopTable with T-slotsDrill guard with micro switchLightening equipmentUser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 6939.26 €: 133.93 €: 20 mm: MK 2 : 260 mm: 30 - 3000 U/min: 1,5 kW: M12 : 430 mm: 715 mm: 1800 mm: 290 kg: 100 mm: 110 mm: 230 - 850 mm: 420 x 340 mmDrilling capacity / normal drilling Performance 20/23 (in E335/ST60)Main switchTapping attachementControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with CEE plug3 years warranty for single shift operationArt. - No. 223.020 R1 (20-2,000 1/min)Art. - No. 223.025 R2 (30-3,000 1/min)OPTIONS (PRICES ON REQUEST):Drill package 3 (vice &, keyless chuck)Coolant deviceLED lighting with pivot armThe data for this ad was created  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 15095.86 €: 289.84 €: 30 mm: MK 3 : 300 mm: 0 - 4000 U/min: 3 kW: M30x3,5 : 900 mm: 610 mm: 1980 mm: 385 kg: 0,10 / 0,16 / 0,25 mm/U: 125 mm: 150 - 700 mm: 590 x 450 mm: 125 mmDrilling capacity / normal drilling capacity 30/35 (in E335/ST60)Main switchDispositif de taraudageControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEmergency stop buttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with CEE plug3 years warranty for single shift operationMechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed ratesDrilling cross with pushbutton (on/off) for feed rateIn tapping mode: Right-left lifting via drill cross switch or opti ...

: neu : 2025 : .00772 : prompt, Zwischenverkauf v : 341.12 €: 1 : 80 mm: 28 mm: 12 kgVice [felix] 2.0 80Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm)Taper mandrel B16/MK IIReducing sleeve MK II/MK IThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column Drill MAXION / IXION BS 25 ST - G -Well-groomed general condition -CE marking -Year of manufacture 2000 -Drilling capacity / steel 25mm -Tapping device up to M20 -Spindle holder / Morse taper MK 3 -Drilling stroke / spindle stroke 120mm -Projection 260mm -Speed range / infinitely variable 120-2160 rpm -Automatic feed - Work table size 500x365mm -Column diameter 110mm -Spacing/Spindle Table 90-760mm -Drive power 1.5 KW -Drill chuck Dimensions: LxWxH 0.8x0.5x2 meters / Weight 300Kg

Vertical Machining Center YCM - VMC 65A / Fanuc OM -CE marking -Control Fanuc OM -Operational condition / function video available -Travel X / Y / Z 650x410x615mm -Table dimensions 840x420mm -Speed range up to 6000rpm -Tool holder BT 40 -Tool magazine / side changer 16 compartment -Two times hydraulic vise -Electric handwheel -Coolant device -Motor power 7.5 KW -Machine feet Dimensions: LxWxH 3.5x2.4x2.8 meters / Weight 4500Kg