boring mills and machining centers used for sale (3,251)

CNC Vertical Machining Center DECKEL MAHO DMU 50 eVo linear NEW DMG Design With track control Heidenhain iTNC 530 Year of Make: 2010 Travel: X 500 Y 450 Z 400 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 120 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 IKZ 40 bar with paper belt filter Chip conveyor 3 D Probe BLUM tool measurement in the work area Signal light 4 colour DMG Automation PH 150/8 16 pallets with Allmatic + Lang vises Coolant Setup BEMA Coolant Nozzle 4 Height Adjustable Machine Shoes Operating Instructions

Key data: 650 mm, 600 mm, 500 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 630mm Axis X ... 650mm Axis Y ... 600mm Axis Z ... 500mm Spindle speed... 0-18000 rpm controlled axes ... 5 IKZ ... 80bar Spindle holder ... HSK-A63. Magazine spaces ... 32 Axis A ... +30/-115° Axis C ... 0,001° Machine weight ... 9500kg The machine is in good condition, possible to test under power.

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1200 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle mount... ISO 50. Clamping table surface... 1250 x 1250mm Max. table load ... 3000kg Main engine power ... 11kW L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14 000kg The machine is in good condition, possible to test under power.

CNC Vertical - Machining Center HERMLE C 1200 V With track control Heidenhain iTNC 530 Year of Make: 2009 Travel : X 1200 Y 900 Z 500 Speed range : 20 – 10,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1260 mm x 800 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) IKZ 40 bar Blow-off device Scraper belt conveyor Rotating transparent window Coolant Setup Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Heidenhain Control cabinet cooling unit ( RITTAL) Oil mist extraction Various HSK 63 tool holders equipped with tools Spindle Oil Cooler Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating Instructions

CNC Vertical Machining Center HERMLE C 30 U With track control Heidenhain iTNC 530 Year of Make: 2008 Travel distances : X 650 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: NC swivel rotary table Ø 630 mm Vertical tool changer with 32 magazine positions ( HSK 63 ) Linear Axis Standard Version Blowing air d.d. spindle center Blow-off device IKZ 40 bar , Paper belt filter for IKZ Scraper belt conveyor Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electr. iTNC manual control module 3 D Probe Heidenhain Various HSK 63 tool holders equipped with tools Rotating transparent window Oil mist extraction Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating instructions

CNC Vertical Machining Center HERMLE C 50 U With track control Heidenhain iTNC 530 Year of Make: 2008 Travel : X 1000 Y 1100 Z 750 Speed range : 20 – 18,000 rpm continuously variable ( HSK 63) With the following accessories: NC swivel rotary table Ø 1150 mm x 900 mm Vertical tool changer with 60 magazine positions ( HSK 63 ) Blowing air through the centre of the spindle Blow-off device IKZ 80 bar with paper belt filter Scraper belt conveyor Coolant Setup Sealing air for scales, bed flushing Oil mist extraction Manual Cab Door , Automatic Cab Roof Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Heidenhain Various HSK 63 tool holders equipped with tools Rotating transparent window Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating instructions

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm ISO 50 Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power in our warehouse.

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle holder ... ISO 50. Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight ... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power.

Auerbach AX TBE 200.1Year of manuf. : 2013 ____________Description:In general:Drilling-ø (max.):3,5 mmDrilling depth (max.):200 mmDeep drilling module:Technology:DrillingspindleSpeed (max.):10.000 rpmPower:3,5 kWTaper:HSK-A40Equipment/Accessory:Chipmanagement:Chip trayCoolingmanagement:Internal cooling unit with Filter and High-pressure, 140 barWorkpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140Oilmistseparation:Electrostatic extraction, LTA AC 500Further Accessory:Misc. Single lip driller

Witzig & Frank TriFlex 5XYear of manuf. : 2018 Control : Fanuc 30i-B ____________Description:In General:Year of construction:2018Control system:FanucProcessing stations:5 piecesLoading station:1 pieceTravelling range:X-axis:450 mmY-axis:500 mmZ-axis:450 mmRapid traverse X/Y/Z:50 m/minTurret:Number of stations:8Speed:13,300 rpmTorque:58 NmTool holder:HSK 63 CWorkpiece/device:Dimensions max.:350 x 350 x 350 mmMax. permissible mass:250 kgMedia supply line:6 piecesNC swivelling rotary table:A-axis:+/- 150°B-axis:360°Max. load:250 kgTable diameter:320 mmEquipment:Loading/unloading:Fanuc Robot M20i-AChip removal:2x chip conveyorsCoolant supply:IKZ system, 20 barPosition measuring systems:Direct in all axes

number of spindles: 25 -1500 U/min Stufenlosbore capacity in steel (diameter): 23 mmbore stroke: 120 mmtable clamping surface:: 1250 x 340 mmtaper MK: MK3 total power requirement: 2 kWweight of the machine ca.: 0,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 mm: M6 : 700 - 10.000 U/min.spindle stroke: 40 mmthroat: 200 mmcolumn diameter: 50 mm: 2 x 12 x 80 mm: 110 / 250 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,54 kWweight: 64 kgStandard equipment:5 TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function.setpoint, actual speed display, integrated drilling depth display with touchzero point transfer, virtual drilling depth scale in the display, machine statusstatus indicators and warnings on the display, Service information, Selectable operator languageoperator language: DE/EN/FR/ES/IT/NL/RU.- AC motor 230 Volt, 50 Hz- Connection plug ready fitted, cable length 3 m- Infinitely variable speed adjustment via potentiometer- Three separate buttons for clockwise rotation - anticlockwise rotation - stop (sp ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 30100 €: 574.91 €: 50 mm: MK 5 : 360 - 1.250 mm: 44 - 1.206 (12) U/min: Stahl/Guß: M40/M50 : 2060 mm: 995 mm: 2240 mm: 2300 kg: 441 - 1.345 mm: 0,06 - 0,2 (3) mm/min: 3.7 kW: 300 mm: 270 mm: 1.785 x 785 x 190 mm: 0,75 kW: 635 x 520 x 420 mm: 2645 mm: 0,75 kWleft/right rotationautomatic feeddrilling depth limitmanual headstock adjustment with hydraulic clampingelectric height adjustment of extension arm andhydraulic clampinghydraulicclamping of swivel movement of extension armcentral operation panel on the front sidepower load readout for drilling spindlehand wheel for spindle fine feedcoolant equipmentmachine lampbox tablemachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : 1280 mm: 16 mm: 12 mm: 8 1/min: 3 °: 7 : 500 mm: 22.5 kW: 250 l: 950 mm: 2100 mm: 1400 mm: 2000 mm: 5000 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 68700 €: 1298.43 €: 3100 mm: 13 mm: 8 mm: 50 mm: 13 1/min: 1.75 °: 16 : 37 to: 1000 mm: 200 mm/s: 30 kW: 330 l: 2 Stk.: 840 mm: 600 mm: 3550 mm: 4280 mm: 2300 mm: 3600 mm: 2350 mm: 12500 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade ...

: neu : ca. 12 Wochen ab Auftrags : 1030 mm: 8 mm: 5 mm: 14 1/min: 3 °: 7 : 500 mm: 7.5 kW: 100 l: 900 mm: 1550 mm: 1150 mm: 1600 mm: 1800 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1595 €: 23 mm: 19 mm Weldon : 1.6 kW: M20 : 266 mm: 259 mm: 500 mm: 17 kg: 23 mm: 50 mm: 75 mm: 190 mm: 160 - 250 / 390 - 580 U/min: 8 mmThe PRO-52T drilling machine is suitable for hole cutting and tapping applications.Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”).Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system.Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality.Intelligent speed control system maintains constant motor speed regardless of changing loads.Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety.Features and benefits:• powerful motor with heavy duty 2-speed gearbox• Ele ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1781.01 €: 10 mm: B 16 : 180 mm: 250 - 3000 U/min: 400 mm: 248 mm: 460 mm: 30 kg: 50 mm: 105 - 245 mm: 300 x 200 mm: 50 mmContinuous/normal drilling performance 10/12 (in E335/ST60)Manual feedDigital speed displayRobust, high quality and inclined rotation hood for easy speed readingLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionUndervoltage releaseDrill protection with electr. FuseConnection cable with Schuko plug (1.2 m)3 years warranty for single shift operationOPTIONS:Machine cabinet with door and drawerDrill package 2 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 5309.85 €: 102.48 €: 18 mm: MK 2 : 240 mm: 30 - 3000 U/min: 0.75 kW: M12 (steigungsabhängig) : 705 mm: 355 mm: 1825 mm: 195 kg: manuell mm/U: 82 mm: 180 - 870 mm: 340 x 280 mm: 100 mmINCLUDES FREE SPRING PACKAGE (with purchase until March 31, 2026)- VÖLKEL Precision Package (List price €54.90) Contents: + MGB GREEN RING FORM B 1 x M4 (35330) 1 x M5 (35334) 1 x M6 (35338) 1 x M8 (35342) + LÖHER Core Drill Bits (M4, M5, M6, M8)- FLOTT quick-release drill chuck 3-16 mm B18 (list price €115.43)- FLOTT tap holder B16 (list price €191.57)- Taper mandrel DIN 238 MK2/B16 (list price €26.18)- Taper mandrel DIN 238 MK2/B18 (list price €26.18)- Felix 2.0 - 100 mm (list price €428.36)YOU SAVE: 842,62 €Drilling capacity / normal drilling capacity 18/20 (in E335/ST60)Thread cutting systemControl panel with OLED displayRobust, high  ...

: gebraucht : 2002 : 090129 : prompt, Zwischenverkauf v : Türkei : 27800 €: 1 : 3100 mm: 10 mm: 350 mm: 10 1/min: 1.5 °: 1000 mm: 22 kW: 3800 mm: 3600 mm: 2000 mm: 9800 kgSwing cut constructionNC-preselection system ENC100 for back gauge, cutting length and piece counterMotorized back gauge 1000 mm on ball screws, folding upwardsHydraulic hold down pistonsFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotOilfillingLight barrier on the back of the machineUser manual in GERMAN with EC declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A TOS CNC table boring machine is available. Travels X/Y/Z/W: 1200mm/1100mm/1000mm/600mm, spindle diameter: 100mm, tool holder: ISO 50, max. table load: 3000kg, table: rotary table, accuracy X/Y/Z: +/-0.02mm, control: Heidenhain TNC 135. Including various accessories. The machine cannot produce circular pockets, but only chamfers. Documentation available. An on-site inspection is possible.

spindle diameter: 130 mmx-axis: 4000 mmy-axis: 2100 mmz-axis: 1500 mmw-axis: 700 mmspindle taper: BT 50 spindle turning speed range: 2500 U/minspindle drive: 22 / 26 kWtable surface area: 1600 x 2000 mmtable load: 12 tB-axis (table): 0,001 °feeds longditudinal/cross/vertical: 5000 mm/minrapid motion -longitudinal/cross/vertical: 15 / 12 / 15 m/minControl: Fanuc 0i MF total connected load: kWweight of the machine ca.: 35 tdimensions of the machine ca.: 7,5 x 6,7 x 4,5 mEquipped with:- FANUC 0i MF (10.4” LCD)- Data Server + AICC II- ATC for 60 Tools (BT 50)- X/Y/Z axis THK roller linear guide way- X/Y/Z axis Haidenhain linear scales- Coolant thru spindle 40bar- Spindle oil cooler- Hydraulic cooler- Air conditioner- Chip conveyorOperating Hours: 14761hCutting Hours: 4382hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling Ø to: 30 mm Spindle holder: MK 3 Quill stroke: 120 mm Table clamping surface: 335 x335 mm Table swivels horizontally: 360° Table adjustment via hand crank approx.: 550 mm Largest distance between table and drilling quill: 550 mm Largest distance between machined base plate and drill quill approx.: 1120 mm 12 spindle speeds: 160 - 930 rpm Drive motor: 380 V, approx. 0.8/1.3 kW Space requirement: 900 x 470 x 1780 mm

CNC Machining Center Hedelius C60S -1200 Control: Heidenhain iTNC 530 Year of Make: 2016 Travels: X-axis 1,200 mm Y-axis 620 mm Z-axis 520 mm Clamping area: 1,550 x 600 mm Table load: approx. 1,500 kg g Mount: SK 40 Tool magazine: 30 – compartment Spindle speed: 30 - 6,000 rpm Accessories - Screen filter system KM500 - High-pressure pump - Chip conveyors - Machine hood - LTA suction

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1445 €: 19 mm Weldon : 1 kW: 307 mm: 221 mm: 317 mm: 135 kg: 36 mm: 51 mm: 70 mm: 350 U/min: 6 mmNew PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and givesadditional safety and diagnostic information.Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode.The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speedand the range of allowable cutting parameters for a given tool type and hole diameter.It results in extending tool life of both HSS and TCT cutters and enhanced machine performance.Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green)are possible in manual mode only.A safety strap protects ...

Travel X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10000rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11000kg.

Drill diameter: 65mm, outreach: 380mm, tool holder: SK50, speed: 1600rpm, table dimensions X/Y: 630mm/500mm, rapid traverse Z: 4750mm/min, drilling capacity steel/cast iron: 65mm/80mm, thread cutting capacity steel/cast iron: M68/M72, machine dimensions X/Y/Z: approx. 1500mm/1200mm/2950mm, weight: approx. 2000kg, control: PLC. Including three tool holders, safety enclosure, minimum quantity lubrication system, spare parts and digital readout. Without milling head attachment and drill crown. The control cabinet has optical damage. Documentation available. An on-site inspection is possible.

x-travel: 1300 mmy-travel: 1300 mmz-travel: 1300 mmControl: Siemens 840D SL table-size: dia. 800 mmtable weight: 1500 Kgc-axis: 360 / 0,0001 °number of spindle speeds: 10000 U/min/rpmtool taper: ISO 50 spindle drive: 40 / 52 kWrapid travel x/y/z: 50 m/minTools changer: 199 pos.dimension of workpiece: 1400 x 1120 mmtotal power requirement: 42 kVAweight of the machine ca.: - tdimensions of the machine ca.: 11,9 x 6,1 x 5,2 m4-axis BAZequipped with:- CNC control Siemens 840D Solution Line- pallet changer with 4 pallets (dia. 800mm)- rotary table (B axis)- tool changer 199-fold (SK 50)- coolant system- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:600 mmy-travel:700 mmz-travel:60 mmtool taper:SK40 magazine place:30 Stücktable surface area:630 mm5axis-CNC-Milling MachineMake: DMGType: DMU 60 PYOM: 2004

x-travel: 560 mmy-travel: 560 mmz-travel: 660 mmControl: M 730 BM MAPPS IVdistance spindle center to table: 80 - 640 mmdistance Spindlenose and center of table: 70 - 730 mmMain spindle:: max. spindle speed: 12.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 spindle diameter in front bearing: 80 mmpallet changer:: numbers of pallets: 2 pos.work height max.: 1.050 mmsize of pallet: 400 x 400 mmmax. workpiece weight: 400 kgmax. workpiecediameter: 630 mmMax. workpiece - hight: 900 mmB-Axis: 0,001 °Indexing-time 90°: 1,3 secchange time of pallets: 8,0 secTool-Presetter:: number of toolpositions: 60 pos.tool taper: SK 40 max. tool diameter: 70 mmmax. tool-dia with free toolbox: 170 mmmax. tool length: 450 mmmax. tool weight: 8 kgchange-time tool to tool: 0,9 secchange-time chip to chip: 2,8 - max. 9,9 secfeeds:: feed speeds: max. 60.000 mm/minrapid traverse ( X / Y  ...