1,735 presses used for sale

pressure: 20 ttotal power requirement: 20 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: ca. 300 mmstroke: ca. 200 mmpressure capacity max.: 35 tdie cushion hydr. pressure/stroke: 15 ttotal power requirement: 5,6 kWweight of the machine ca.: ca 2,5 tdimensions of the machine ca.: 1 x 0,9 x H 2,4 m mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 23500 €: 451.2 €: 40 to: 800 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 1750 mm: 950 mm: 1900 mm: 1640 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 €: 436.8 €: 150 to: 1520 mm: 300 mm: hydraulisch : 11 kW: 2630 mm: 1000 mm: 2450 mm: 3270 kg: 610 mm: 1520 mm: 5 mm/s: 9 mm/s: 10 mm: 100 mm: 190 mm2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand panel and foot pedalheight adjustable tableuser manual in Germanand Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 292300 €: 600 to: 6050 mm: Y1 / Y2 / X und R Achse : 365 mm: 5100 mm: 510 mm: 700 mm: hydraulisch : 80 mm/s: 6,5 mm/s: 80 mm/s: 750 mm: 280 l: 2 x 11 kW: 7600 mm: 2650 mm: 3950 mm: 52500 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES, STEP, DXF files importservo  ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 94120 €: 1778.87 €: 175 to: 4050 mm: Y1 / Y2 / X Achse : 265 mm: 3600 mm: 450 mm: 530 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 250 l: 18.5 kW: 5250 mm: 1700 mm: 2850 mm: 12780 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010  ...

: gebraucht : 2023 : 8285 : prompt, Zwischenverkauf v : Türkei : 33900 €: 1 : 30 to: 1050 mm: 3 (Y1, Y2, X) : 160 mm: 850 mm: 250 mm: 390 mm: hydraulisch : 10 mm/s: 130 mm/s: 495 mm: 250 mm/s: 835 mm: 104 mm: 75 l: 7.5 kW: 2470 mm: 1250 mm: 2245 mm: 3250 kgdemo machine / mint conditionnet price (price for new machine € 41.200,00)Y1, Y2, X - 3 AxisControl Unit - DT 10 Touch screen 2D graphic (Remote Control)Back gauge: motorized &, linear guide &, ballscrewEuropean clamping systemEuropean clamping system top toolEuropean style bottom tool holderSupport arms with T-SlotSafety side covers (Non CE)World known electrical equipmentsOPTION:DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) €2.110,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 52000 €: 982.8 €: 150 to: fix : 1250 mm: 500 mm: 700 mm: 1500 mm: 20 mm/s: 10 mm/s: 3 mm/s: 1200x700 mm: 1250x400 mm: 2400 mm: 1200 mm: 2800 mm: 5200 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guardAL ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 59800 €: 1130.22 €: 100 to: 400 mm: 800 x 500 mm: 500 mm: 110 mm/s: 10 mm/s: 160 mm/s: 11 kW: 1900 mm: 1700 mm: 2930 mm: 5500 kg: 250 barWelded monoblock frameCylinders hardened and chrome-plated2 auxiliary cylinders and 2 round guidesT-slots can be configured according to customer requirementsPump, valves, and filters from Bosch RextrothHydraulic overload valveHydraulic proportional valveCoolerSiemens electrical components8 additional signal inputs and outputs7-inch touchscreenSiemens S7 PLCStroke, pressure, speed, and dwell time adjustable via the PLCRemote maintenance accessSick light guardsSafety coversSafety PLC from Siemens or SickCategory 4 sensors and photoelectric switchTwo-hand control panelReset and emergency stop buttonsEquipped according to CE regulationsThe data for this ad was created with ModulMWS - the software solution o ...

pressure: - tchamfer lenght: - mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 185 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 175 mm/sbending speed: 0-12 mm/stotal power requirement: 22 kWweight of the machine ca.: 15.500 kgdimensions: 4970 x 3260 x 2090 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 18 kWweight of the machine ca.: 13.000 kgdimensions: 5080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tdistance between columns: - mmtotal power requirement: 4 kW200 mm inward space The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28300 €: 540.53 €: 40 to: 2000 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 1750 mm: 950 mm: 1900 mm: 2100 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of conrods 2 Mecfond CE marked; Table dimensions ( x-y/mm) 2100 x 1050 Stroke (mm) 200 Slide Adjustment (mm) 100 Shut Height (mm) 550 Strokes type adjustable Stroke per minute 25 - 35 Motor Power (kw) 40

: neu : Oktober 2025, Zwischenver : Türkei : 70700 €: 1336.23 €: 100 to: 600 mm: 900 x 500 mm: 800 mm: 400 mm: 220 mm/s: 1 - 20 mm/s: 250 mm/s: 14,65 kW: 1900 mm: 1700 mm: 4400 mm: 6000 kg: 30 - 239 barWelded monoblock frameCylinders hardened and chrome-plated2 auxiliary cylinders and 2 round guidesPump, valves, and filters from Bosch RextrothHydraulic overload valveCoolerSiemens electrical components8 additional signal inputs and outputs10-inch touchscreenPLC Siemens S7 1200Stroke, pressure, speed, and dwell time adjustable via the PLCRemote maintenance accessSick light guardsSafety coversSafety PLC from Siemens or SickTwo-hand control panelReset and emergency stop buttonsEquipped according to CE regulationsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A "Raster Zeulenroda" (today Zeulenroda Presstechnik) step press type "Paust 16.2" with 160 kN press force is sold. The machine was completely overhauled in 2006 and has been in use in 1-3 shifts since then. A visit is possible from Monday to Friday.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 104800 €: 1980.72 €: 150 to: 500 mm: 950 x 650 mm: 1200 x 750 mm: 750 mm: 100 mm/s: 5,5 mm/s: 165 mm/s: 11 kW: 2200 mm: 2200 mm: 3650 mm: 9500 kg: 254 bar: 32 to: 200 mm: 120 mm: 160 bar: 40 mm/sec.: 720x540 mmlight curtaincushionmanual and automatic workingmanual stroke adjustment by camshaft switchmaintenance free self lubricating 4-fold ram guidingpolster plate with T-slotsaccording to ",CE", rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Türkei : 66900 €: 1264.41 €: 60 to: 250 mm: 550 x 850 mm: 600x1000 mm: 500 mm: 100 mm/s: 10 mm/s: 165 mm/s: 11 kW: 1950 mm: 1900 mm: 2750 mm: 5300 kg4-pillar guidetable and ram with T-slotsmanual stroke adjustment via cam switchmanual and automatic operationfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to: 400 mm: 1000x680 mm: 1000x740 mm: 765 mm: 250 mm/s: 10-20 mm/s: 22 kW: 2400 mm: 1525 mm: 3900 mm: 10500 kgNC control with touchscreen8-fold ram guidetable and ram with T-slots2 hand operationpressure adjustmentstroke adjustmentdie cushioncentral lubrication systemlight guarduser manual in German or Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 74100 €: 1400.49 €: 100 to: 300 mm: 600 x 900 mm: 700x1100 mm: 550 mm: 100 mm/s: 8,5 mm/s: 165 mm/s: 11 kW: 2100 mm: 2050 mm: 3050 mm: 6500 kg4-pillar guidetable and ram with T-slotsmanual stroke adjustment via cam switchmanual and automatic operationfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 6500 €: 125.45 €: 60 to: fix : 250 mm: 1040 mm: 180x120 mm: 4 mm/s: 10 mm/s: 1710 mm: 700 mm: 2100 mm: 800 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 70 kN, 200 mm, 500 mm

TOX Pressotechnik CEC 008.000 - Pneumatic Press - Operation via control panel and foot pedal - incl. accessories - Year of construction 1999 Specifications - Capacity: 70 kN - Total stroke: 200 mm - Power stroke: 12 mm - Projection: 500 mm - Table dimensions WxD: 200 x 315 mm - Air pressure: 6 bar - Voltage: 230 V - Dimensions WxHxD: 700 x 2350 x 990 mm

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 72300 €: 1366.47 €: 40 to: 1250 mm: Y1 / Y2 / X und R Achse : 200 mm: 1050 mm: 250 mm: 440 mm: servomotorischer Spindela : 115 mm/s: 10 mm/s: 115 mm/s: 650 mm: 250 mm: 1000 mm: 7.2 kW: 1950 mm: 1450 mm: 2650 mm: 3600 kgSTANDARD EQUIPTMENT:servomotorized spindle drive4 axes (Y1, Y2, X and R)Color graphics controlDELEM DA-66S- 17 ", Touchscreen- 3D imaging in simulation and production- Suitable for personal Windows applications- Compatible with DelemModusys- USB and peripheral interface- Skill-specific application treatment- Sensor, bending and correction interfaceservo motorized back gauge on linear guides and ball screwsCNC crowning tableupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)laser safety device Fiessler AKASmounted on the upper beamlinear guided sheet support armsaccording to C ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 52500 €: 992.25 €: 60 to: 250 mm: 500x430 mm: 750x500 mm: 450 mm: 26 mm/s: 8,5 mm/s: 47 mm/s: 7.5 kW: 1820 mm: 960 mm: 2400 mm: 4000 kg2-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 79500 €: 1502.55 €: 60 to: 500 mm: 700x350 mm: 700x500 mm: 600 mm: 250 mm: 120 mm/s: 38 mm/s: 8 mm/s: 58 mm/s: 5.5 kW: 1100 mm: 1500 mm: 2350 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 8319 : prompt, Zwischenverkauf v : Türkei : 77990 €: 1326.78 €: 1 : 70200 €: 200 to: 3050 mm: Y1 / Y2 / X und R Achse : 210 mm: 2550 mm: 250 mm: 445 mm: hydraulisch : 100 mm/s: 7 mm/s: 73 mm/s: 620 (mit optionaler R-Ach mm: 250 mm/s: 858 mm: 104 mm: 150 l: 15 kW: 3750 mm: 1390 mm: 2500 mm: 8160 kg4 axes (Y1, Y2, X and R axis)CNC control DT-10- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBCNC controlled back gauge with linear guide and ball screw spindlesCNC CONTROLLED CROWNING TABLEintermediate clamps for ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 63320 €: 1196.75 €: 100 to: 2550 mm: Y1 / Y2 / X Achse : 265 mm: 2200 mm: 450 mm: 530 mm: hydraulisch : 180 mm/s: 10 mm/s: 120 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 100 l: 11 kW: 3800 mm: 1670 mm: 2850 mm: 7800 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010 / A ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 80100 €: 1513.89 €: 60 to: 350 mm: 550?850 mm: 600?1000 mm: 600 mm: 100 mm/s: 10 mm/s: 165 mm/s: 11 kW: 1950 mm: 1900 mm: 2850 mm: 5350 kg: 170 bar: 24 to: 150 mm: 100 mm: 156 bar: 65 mm/sec.: 470?650 mmlight curtaincushionmanual and automatic workingmanual stroke adjustment by camshaft switchmaintenance free self lubricating 4-fold ram guidingpolster plate with T-slotsaccording to ",CE", rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 500 to: 500 mm: 5.000 x 2.550 mm: 700 mm: 18 mm/s: 3 mm/s: 5000 mm: 5000 mm: 3000 mm: 32000 kg: horizontal verschiebbar : 2550 mm: 1.700 mm: 3.600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.