presses used for sale (1,796)

: neu : ca. 4 Monate ab Auftragse : Italien : 103500 €: 1956.15 €: 150 to: 500 mm: 1250x1000 mm: 600 mm: 23 mm/s: 4 mm/s: 5.5 kW: 1520 mm: 1270 mm: 2500 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of LogoTech o ...

: neu : ca. 4 Monate ab Auftragse : Italien : 65000 €: 1228.5 €: 35 to: 500 mm: 800x500 mm: 600 mm: 125 mm/s: 9 mm/s: 68 mm/s: 4 kW: 1100 mm: 1100 mm: 2300 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 71300 €: 1347.57 €: 60 to: 500 mm: 800x500 mm: 600 mm: 120 mm/s: 8 mm/s: 58 mm/s: 5.5 kW: 1100 mm: 1100 mm: 2350 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 78000 €: 1474.2 €: 85 to: 500 mm: 900x600 mm: 600 mm: 105 mm/s: 7 mm/s: 58 mm/s: 7.5 kW: 2250 mm: 1150 mm: 2400 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 €: 1965.6 €: 125 to: 500 mm: 1200x700 mm: 600 mm: 115 mm/s: 7 mm/s: 70 mm/s: 15 kW: 2550 mm: 1500 mm: 2600 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 €: 2324.7 €: 170 to: 500 mm: 1200x700 mm: 600 mm: 110 mm/s: 7 mm/s: 70 mm/s: 19 kW: 2700 mm: 1600 mm: 2650 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 €: 3109.05 €: 260 to: 500 mm: 1400x1000 mm: 600 mm: 75 mm/s: 5 mm/s: 60 mm/s: 22 kW: 2800 mm: 1650 mm: 2750 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 46400 €: 886.24 €: 100 to: 500 mm: 700 x 350 mm: 800 x 600 mm: 500 mm: 300 mm: 25 mm/s: 4 mm/s: 4 kW: 1900 mm: 1200 mm: 2600 mm: 2100 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualincl. pressure switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 28800 €: 550.08 €: 20 to: 1.7 mm: 360 mm: 550 mm: 140 mm: 1 - 50 mm: 160 1/min: 4 : 40 mm: 35 mm: 200 mm: 240 mm: 2.2 kW: 1360 mm: 1100 mm: 1860 mm: 1250 kgWelded steel frame construction4-fold ram guidePneumatic clutch-brake combinationProtective enclosure with light barriers and side doorsMechanical overload protectionTwo-hand and foot pedal operationManual stroke adjustmentManual ram adjustmentVariable stroke rate via frequency converterOperating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operationTouchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs2 free cams for connecting peripheralsAutomatic central lubrication ...

: neu : 2026 : 070125 : prompt, Zwischenverkauf v : Türkei : 40200 €: 767.82 €: 1 : 40 to: 2.5 mm: 450 mm: 650 mm: 150 mm: 1 - 80 mm: 125 1/min: 4 : 75 mm: 40 mm: 225 mm: 300 mm: 835 mm: 4 kW: 1350 mm: 1370 mm: 2330 mm: 2100 kgWelded steel frame construction4-fold ram guidePneumatic clutch-brake combinationProtective enclosure with light barriers and side doorsMechanical overload protectionTwo-hand and foot pedal operationManual stroke adjustmentManual rammer adjustmentVariable stroke rate via frequency converterOperating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operationTouchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs2 free cams for connecting peripherals ...

• Lot of 4 manual die press • Piston diameter approx, 38 mm Auction-ID: A7-50834-617

• Pneumatic press • Table dimensions 125 x 125 mm • Actuating by pedal • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 800 x 600 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-118

The machine is in good technical condition; testing is possible by prior arrangement. WORK TABLE (MM) 900 x 700 mm UPPER PLATEN (MM) STROKE (MM) 550 x 400 mm 600 mm DAYLIGHT (MM) RAM CYLINDER DIAMETER 900 mm 135 mm / 1 pc AUXILIARY CYLINDER DIAMETER 3550 mm / 2 pcs RAM CYLINDER DOWNWARD SPEED (MM/S) 250 mm/s RAM CYLINDER RETURN SPEED (MM/S) 250 mm/s RAM CYLINDER WORKING SPEED (MM/S) 10 - 40 mm/s MOTOR PUMP 18.5 kW 45 cc OIL TANK (LITERS) OIL (LITERS) 345 l 67 l

Key data: 63 t

Press force: 63 t, with drawing cushion and separate hydraulic power unit

Mechanical stamping press manufactured in 2008. This SANGIACOMO T250 RCE features a nominal force of 250 t and an adjustable stroke ranging from 15 to 220 mm. It has a maximum die surface of 800 × 1,450 mm and a closed die maximum height of 662.5 mm. If you are looking to get high-quality stamping capabilities, consider the SANGIACOMO T250 RCE machine we have for sale. Contact us for further details.

- CNC Crowning- Hydraulic tool clamping- EFL Easy form laser measuring & correction system- Set Tooling - Laser guide protection- Controlled axis Y1/Y2/X/R/V-Axis

Auction-ID: A1-50750-437

Lg.Nr. 25514 Defective Hydr. CN Press Brake Technical data: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 370 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2400 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - Hydr. Upper + Lower - Tool Clamping - Die table displacement pneumatically supported Machine does not drive reverence because 2 axles right in the back gauge are without function, control module may ...

Max. press force: 82kN, total stroke: 200mm, power stroke: 12mm, min./max. air pressure: 3bar/6bar, machine weight without tooling: 610kg. Inspection possible by arrangement.

Power supply: 380V, frequency: 50Hz, rated current: 25A, backup fuse: 35A, control voltage: 220V. Documentation available. Inspection possible by arrangement.

pressure: 320 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 140 mm/secwork speed: 10,5 mm/secreturn speed: 150 mm/secwork stroke: 375 mmdayligth: 650 mmtable height: 900 mmtable width: 220 mmoil volume: 400 ltr.voltage: 380 Volttotal power requirement: 30.0 kWweight: 21300 kgrange L-W-H: 5350 x 2450 x 3150 mmFeatures:- DELEM DA66T CNC control system- CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, as well as CNC crowning- FIESSLER AKAS laser safety device in front of the machine (including FPSC)- Rear safety device: light barrier- BOSCH/HOERBIGER hydraulic components- SIEMENS electrical components- 2 front support arms- 1 freely movable dual foot control- Upper and lower toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2017 Serial number: 1711-018 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic distribution system, pressure/temperature monitoring, heating system, operator control panel and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 5,520 kg All descriptions are indicative only. Auction-ID: A1-50546-20

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar workpieces. Manufacturer: AS Metal Model: Transform Year: 2022 Serial number: 2207-010 Power: 39 kW Electrical supply: 380 V, three-phase, 50 Hz Configuration: Sliding worktable, vacuum/pressure system, upper pressure vessel, safety guarding and separate operator control console Working table: Approx. 2,500 × 1,600 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,350 kg All descriptions are indicative only. Auction-ID: A1-50546-17

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 25 toPRESS TABLE  table surface (left-right): 500 mm  table surface (front-back): 310 mmSLIDE  table surface (left-right): 250 mm  table surface (front-back): 133 mm  spigot hole diameter: 40 mm  stroke rate (max.): 155 /minSLIDE (MECHAN. PRESS)  slide adjustment: 50 mm  stroke min.: 0 mm  stroke max.: 60 mm  main drive power: 1.5 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 275 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 980 mm  space requirements -front/back-: 1000 mm  total height: 1890 mm  total weight approx.: 950 kg

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 45 toPRESS TABLE  table surface (left-right): 750 mm  table surface (front-back): 440 mm  thickness of bolster plate: 60 mmSLIDE  table surface (left-right): 460 mm  table surface (front-back): 300 mm  spigot hole diameter: 45 mm  stroke: 80 mm  stroke rate (max.): 140 /minSLIDE (MECHAN. PRESS)  slide adjustment: 70 mm  stroke min.: 10 mm  stroke max.: 80 mm  stroke rate (min.): 70 /min  stroke rate (max.): 190 /minTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 370 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 1225 mm  space requirements -front/back-: 1355 mm  total height: 2450 mm  total weight approx.: 3100 kgATTACHMENTS (PRESSES)  strip feeder: optional   feeder type: grip feeder   foot engagement: optional   European C ...

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 43 toPRESS TABLE  table surface (left-right): 700 mm  table surface (front-back): 440 mmSLIDE  stroke: 90 mm  stroke rate (max.): 105 /minSLIDE (MECHAN. PRESS)  slide adjustment: 65 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 380 mm

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 63 toPRESS TABLE  table surface (left-right): 900 mm  table surface (front-back): 530 mmSLIDE  table surface (left-right): 460 mm  table surface (front-back): 360 mm  stroke: 110 mm  stroke rate (max.): 70 /minSLIDE (MECHAN. PRESS)  stroke min.: 6 mm  stroke max.: 110 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 450 mmELECTRICAL SPECIFICATIONS  total power consumption: 4 kWDIMENSIONS / WEIGHTS  total weight approx.: 4500 kg

CONTROLS  electronic controls SIEMENS PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, double sided   openings in uprights: yes   number of slide actions: 1 PRESS FORCES  total force (nominal): 160 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 1050 mm  opening in bed (left-right): 240 mm  opening in bed (front-back): 200 mmSLIDE  table surface (left-right): 900 mm  table surface (front-back): 600 mm  spigot hole diameter: 50 mmSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  stroke min.: 20 mm  stroke max.: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 570 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1600 mm  space requirements -front/back-: 3000 mm  total height: 4400 mm   ...

: neu : 2025 : 080109 : prompt, Zwischenverkauf v : Türkei : 68282 €: 1033.83 €: 1 : 1 : 54700 €: 120 to: 3050 mm: Y1 / Y2 / X und R Achse : 180 mm: 2550 mm: 250 mm: 375 mm: hydraulisch : 100 mm/s: 9 mm/s: 77 mm/s: 620 (mit optionaler R-Ach mm: 250 mm/s: 878 mm: 104 mm: 150 l: 11 kW: 3750 mm: 1230 mm: 2400 mm: 5900 kgSpecial price for demo machineLike-new condition4 axes (Y1, Y2, X and R axes)CNC control DT-10- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBCNC controlled back gauge with linear guide and ball screw spindl ...

: neu : ca. 2 Wochen ab Auftragse : Türkei : 153986 €: 1867.32 €: 98800 €: 320 to: 3050 mm: 365 mm: 2600 mm: 750 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 37 kWSPECIAL PRICE FOR STOCK MACHINE EXW TÜRKIYETandem preparationProjection 750 mmLight barrier for single or later tandam operation6 axis back gauge X1, X2, R1, R2, Z1, Z2CNC CONTROL SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup a ...