presses used for sale (1,738)

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 79900 €: 1510.11 €: 130 to: 1000 mm: 640 mm: 210 mm: 5 - 110 mm: 60 1/min: 630x400 mm: 90 mm: 330 mm: 11 kW: 2200 mm: 1372 mm: 3000 mm: 8200 kg8-fold ram guidefront protection by light guardmanual ram adjustmentmech. overload safety deviceautomatic lubricationuser manual in GERMAN and ENGLISHaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 97800 €: 1848.42 €: 160 to: 1100 mm: 700 mm: 210 mm: 23 - 110 mm: 60 1/min: 630x400 mm: 8 : 95 mm: 65 mm: 325 mm: 480 mm: 2400 mm: 1430 mm: 3200 mm: 9950 kg8-fold ram guidelight guardmot. ram adjustmenthyd. overload safety deviceautomatic lubricationaccording to CE rulesuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 130600 €: 2468.34 €: 200 to: 1200 mm: 740 mm: 220 mm: 24 - 140 mm: 50 1/min: 950x600 mm: 100 mm: 390 mm: 15 kW: 2350 mm: 1700 mm: 3435 mm: 14900 kg8-fold ram guidelight guardmot. ram adjustmenthyd. overload safety deviceautomatic lubricationaccording to CE rulesuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of conrods 2 Table dimensions ( x-y/mm) 3700 x 2200 Stroke (mm) 600 Slide Adjustment (mm) 250 Light at T.D.C.(mm) 1400 Stroke per minute 3-12 Motor Power (kw) 135 Accessories frontal moving bloster Cushion number 3 Cushion type pneumatic Cushion stroke (mm) 200 Cushion power (ton) 50 x 3

The machine is in good technical condition; testing is possible by prior arrangement. Vertical hydraulic press with a built-in 15-ton hydraulic power unit. Operating mode: semi-automatic. Power supply: 400 V, three-phase, 50 Hz. Motor power: 4 kW. Controls: digital pressure regulation; downward, upward, and rapid traverse movements. Weight (per nameplate): 700 kg. According to the section of the manual covering intended use, this configuration is designed for compressing filters with a diameter of 210 mm and a height of 1,090 mm.

The machine is in good technical condition; testing is possible by prior arrangement. Vertical hydraulic press with hydraulic power unit. Power supply: 400 V, three-phase. Motor power (per nameplate): 2.5 HP. Control system: Electrical cabinet with Siemens LOGO! mini PLC. Weight (per nameplate): 1,500 kg.

Offer 26338 Technical data: - max. Working length 3340 mm - Column passage 2600 mm - Max. pressing force 100 t - Projection 400 mm - Max. stroke 100 mm - max. Installation height 370 mm - Table height approx. 960 mm - Feed speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 9.5 kW - Space requirement approx. W 3500 x H 2350 x D 1950 mm - Weight approx. 6.8 t - with: - CNC control DELEM DA 58 - Back gauge 0 - 600 mm

Pressing force: 63kN, stroke: 300mm, motor power: 7.5kW, on-site inspection is possible.

Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 900 MT Built: 2007 Billet dia.: 5”, 127 x 390 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 90 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 7 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016

Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 1600 MT Built: 1996 Billet dia.: 6”, 157 x 560 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 110 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 75 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016

Key data: 200 t

Manufacturer: Müller Model No.: CE 200.1.1 Year: 1972 Condition: Used Stock number: 9604 Compressive force: 200 t

Key data: 40 t

Machines from the die-cutting production sector for the processing of coil coil material up to 1mm material thickness for the production of strip goods such as contact plugs for the general electrical and automotive industry. For sale are various high-speed presses from Schaal from 12kN to 40kN. In addition, various material coil unwinders from Huras-Stanzautomation can be purchased. In addition, various automatic winding machines from TF-Wickeltechnik and Huras are for sale. In addition, various pereferie devices can be purchased.

CONTROLS  conventional PRESS FORCES  total force (nominal): 100 toSLIDE  stroke rate (max.): 55 /minSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke min.: 10 mm  stroke max.: 120 mmDIMENSIONS / WEIGHTS  total weight approx.: 4800 kg

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 63 to  nominal work capacity: 630 kNmPRESS TABLE  table surface (left-right): 900 mm  table surface (front-back): 560 mm  thickness of bolster plate: 250 mmSLIDE  table surface (left-right): 450 mm  table surface (front-back): 310 mm  spigot hole diameter: 50 mm  stroke: 100 mm  stroke rate (max.): 100 /minSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke min.: 17.5 mm  stroke max.: 100 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 340 mm  distance table - slide max.: 440 mmELECTRICAL SPECIFICATIONS  total power consumption: 5.5 kW  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1310 mm  space requirements -front/back-: 1500 mm  total height: 2900 mm  total weight approx.: 480 ...

pressure: 135 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 200 mm/secwork speed: 10.0 mm/secreturn speed: 120 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 90.0 mmcontrol: DELEM oil volume: 200 ltr.voltage: 400 Volttotal power requirement: 11.0 kWweight: 8650 kgrange L-W-H: 4250 x 2050 x 2800 mm Very good condition () Current new price: 75.0000 Euros Special price on request---------------------------------------------------------POWER BEND PRO electro-hydraulic press brake featuring: Increased daylight opening (installation height) Increased cylinder stroke Increased throat depth---------------------------------------------------------Equipmen t:- CNC electro-hydraulic press brake- DELEM CNC control DA 56 - 2D graphics Bending sequence calculation Product/tool library USB interface- CNC-controlled axes: Y1 - Y2  ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 74300 €: 1404.27 €: 100 to: 4.5 mm: 700 mm: 1000 mm: 210 mm: 1 - 132 mm: 58 1/min: 6 : 90 mm: 60 mm: 300 mm: 445 mm: 7.5 kW: 1650 mm: 1545 mm: 3011 mm: 7000 kgWelded steel construction body frameCrankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precisionSnBz-12 quality bronze to bearings, grinded for min surface resistanceRam supported from 8 sidesPneumatic counter-balancing of the ram7", touchscreenGears in oil bathPneumatic clutch-brake combinationPLC control for safetyPhotocell light barriersMotorized slide adjustableHydraulic overload protectionTwo hand and foot pedal controlAdjustable stroke (inverter)automatic centrallubricationMachine and equipment in conformity with CE-regulationsOPTIONS: vibration pads € 192,00 bolster plate € 2.580,00The data for this ad was created with ModulMWS - the software sol ...

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 600 to: 500 mm: 6.000 x 2.550 mm: 700 mm: 18 mm/s: 3 mm/s: 5000 mm: 6000 mm: 3000 mm: 43000 kg: horizontal verschiebbar : 2550 mm: 2200 mm: 4600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 500 to: 500 mm: 5.000 x 2.550 mm: 700 mm: 18 mm/s: 3 mm/s: 5000 mm: 5000 mm: 3000 mm: 32000 kg: horizontal verschiebbar : 2550 mm: 1.700 mm: 3.600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 258000 €: 400 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4500 mm: 5000 mm: 2600 mm: 24000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmHorizontal verschiebbarer Zylinder2.200 mmHydraulisch beweglicher Ständer: 3.600 mmBedienung über Handhebel sowie BedienpanelTisch mit integriertem Zylinder zum anheben des WerkstücksAusrüstung gemäß CE Vorschriften Betriebsanleitung in DEUTSCH und ENGLISCH(Symbolfoto)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 218000 €: 400 to: 500 mm: 4.000 x 2.550 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 4000 mm: 2600 mm: 20500 kg: horizontal verschiebbar : 2550 mm: 1.800 mm: 2.900 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 190000 €: 3591 €: 300 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 5000 mm: 2600 mm: 18000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 135000 €: 2551.5 €: 300 to: 500 mm: 3.000 x 2.050 mm: 700 mm: 20 mm/s: 2 mm/s: 3100 mm: 3000 mm: 2600 mm: 11500 kg: horizontal verschiebbar : 2050 mm: 1300 mm: 2000 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 107000 €: 2022.3 €: 200 to: 500 mm: 3.000 x 2.550 mm: 800 mm: 20 mm/s: 2 mm/s: 3550 mm: 3000 mm: 2600 mm: 8500 kg: horizontal verschiebbar : 2550 mm: 1900 mm: 2000 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 80000 €: 1512 €: 200 to: 500 mm: 2.000 x 1.550 mm: 800 mm: 20 mm/s: 2 mm/s: 2400 mm: 2000 mm: 2600 mm: 4800 kg: horizontal verschiebbar : 1550 mm: 1000 mm: 1300 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 66700 €: 1260.63 €: 150 to: 500 mm: 1.550 x 2.000 mm: 800 mm: 20 mm/s: 3 mm/s: 2350 mm: 2000 mm: 2500 mm: 4100 kg: horizontal verschiebbar : 1550 mm: 1000 mm: 1300 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 117000 €: 2211.3 €: 125 to: 500 mm: 800 x 400 mm: 900 x 600 mm: 600 mm: 300 mm: 115 mm/s: 42 mm/s: 7 mm/s: 70 mm/s: 15 kW: 1400 mm: 1950 mm: 2600 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 72500 €: 1370.25 €: 35 to: 500 mm: 700x350 mm: 700x500 mm: 600 mm: 250 mm: 125 mm/s: 43 mm/s: 9 mm/s: 68 mm/s: 4 kW: 1100 mm: 1400 mm: 2300 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 79500 €: 1502.55 €: 60 to: 500 mm: 700x350 mm: 700x500 mm: 600 mm: 250 mm: 120 mm/s: 38 mm/s: 8 mm/s: 58 mm/s: 5.5 kW: 1100 mm: 1500 mm: 2350 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 89700 €: 1695.33 €: 85 to: 500 mm: 700x400 mm: 800x600 mm: 600 mm: 300 mm: 105 mm/s: 41 mm/s: 7 mm/s: 58 mm/s: 7.5 kW: 1200 mm: 1600 mm: 2500 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 138000 €: 2608.2 €: 170 to: 500 mm: 870x500 mm: 1000x600 mm: 600 mm: 300 mm: 110 mm/s: 42 mm/s: 7 mm/s: 70 mm/s: 19 kW: 1500 mm: 1950 mm: 2650 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.