presses used for sale (1,787)

The machine is in good technical condition; it can be tested by prior arrangement.

Long Shaft Press CH-6-LL Year of construction 1992 max. diameter: 6.5 mm Max. shaft length: 102 mm Max. wire section: 128 mm Output: 110 pieces per minute + Long Shaft Press CH-6-LL Built in 1990 max. diameter: 6.5 mm Max. shaft length: 128 mm Max. wire section: 146 mm Output: 110 pieces per minute Both machines are in good condition

pressure: 400 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcontrol: CYBELEC ModEva 10 S total power requirement: 47 kWweight of the machine ca.: 30.400 kgdimensions of the machine ca.: 6000x3000x3450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 56.0 tchamfer lenght: 1400 mmdistance between columns: 1300 mmthroat: 220 mmstroke: 200 mmdayligth: 485 mmwork speed: 8.0 - 10.0 m/minreturn speed: 35.0 mm/secControl: CNC Boschert back stop - adjustable: 0 - 370 mmwork height max.: 915 mmCylinders :: 2 Stückvoltage: 3x 400 Vconnected load: 8.0 kVAweight: 3700 kg very good / well-maintained condition () with lots of bending tools- in checked conditions - machine video -https://www.youtube.com/watch?v=NrpZs6Ar0VoEquipment:- NC electro-hydraulic press brake- BOSCHERT NC control unit, front- NC electro-motorized back stop (X axis) with 2x manually adjustable stop fingers (R+Z axis)- AMADA PROMECAM (SYSTEM A) upper tool holder- AMADA PROMECAM (SYSTEM A) lower tool holder- Handwheel with analog display for adjusting the bending angle- lots of insert tools, including tool cabinet- 1x working cylinder = double-acting cylinder- upper  ...

CNC Hydraulic Press Brake manufactured in 2005. This GASPARINI X-Press 100 features a press force of 100 t and a bending length of 3,100 mm. It is equipped with a Delem DA60 control and a dynamic hydraulic crowning system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI X-Press 100 machine we have for sale. Contact us for further details regarding this machine.

This 4-axis Warcom UNICA 100-40 hydraulic press was manufactured in 1998. It features a press force of 100 t and a bending length of 4,000 mm, making it suitable for various bending applications. The machine is equipped with a Promecam tooling system and ESA S530 CNC control. If you are looking to get high-quality bending capabilities, consider the Warcom UNICA 100-40 machine we have for sale. Contact us for further details.

- HA4 backgauge X, R, Z1 and Z2- WILA NewStandard Top Tool clamping- Power on Hours 26.000 H- PILZ Laser safe - 2 x Arm on front 1000 mm

Rated force: 6000kN, rated force travel: 1.7mm, rated energy: 10.2kJ, stroke: 100mm, stroke rate: 45/min, installation height: 360mm, tool holder adjustment: 50mm, clear width of press frame: 580mm, table width: 550mm, table depth: 620mm, tool holder width: 550mm, tool holder depth: 430mm, motor power: 15kW, length: 2435mm, width: 1500mm, height: 2750mm, weight: 13.5t, an on-site inspection is possible.

pressure: 200 tchamfer lenght: 4100 mmdistance between columns: 3150 mmstroke of upper beam: 200 mmdayligth: 425 mmthroat: 300 mmworking feed: 9.0 mm/secreturn speed: 90.0 mm/secwork height max.: 980 mmback stop - adjustable: ca. 700 mmControl: PPS-TS Touch oil volume: 350 ltotal power requirement: 18.0 kWweight: 12.000 kgrange L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Current new price approx. € 110.000 Special price on request- in checked conditions - machinevideo - https://www.youtube.com/watch?v=ZX9Ap23e__sEquipment:- CNC electro-hydraulic press brakes- with LVD CNC PPS-TS TOUCH control unit intuitive, touchscreen-based user interface simple navigation tool and program library X-axis control and position display Y-axis control and position display swivel-mounted control panel (front left)- CNC-controlled axes: Y1/Y2 + X- CNC motorized backgauge (X-axis) with 4 manua ...

pressure: 40.0 tchamfer lenght: 1250 mmdistance between columns: 890 mmwork stroke: 100 mmdayligth: 300 mmcolumn arm: 200 mmtable width: 140 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 90.0 mm/sectank: 63.0 ltotal power requirement: 3.0 kWweight of the machine ca.: 2000 kgrange L-W-H: 1555 x 1075 x 2149 mm from a vocational training workshop very good condition (!)Features:- conventional hydraulic press brake- swiveling control unit (front left)- electric backgauge (X-axis) incl. digital display for gauge position movement via electric push-buttons (creep and rapid traverse speeds)- manual adjustment of bending depth (Y1 + Y2 axes) handwheel with analog position indicator- 2x manually adjustable gauge fingers (R + Z axes)- 1x upper tool- 1x reversible universal die block- pressure gauge / pressure indicator- 1x mobile control unitThe data for this ad was created w ...

: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 8800 €: 169.84 €: 120 to: horizontal verschiebbar : 400 mm: 900 mm: 1200 mm: 5,8 mm/s: 9.5 mm/s: 1200 x 400 mm: 4 kW: 1900 mm: 1000 mm: 2450 mm: 1250 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure manometerOPTIONS (PRICES ON REQUEST):Handwheel and fixingbolt for cylinderadjustment1 pair of V-blockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tdistance between columns: 600 mmstroke: 600 mmtable-size: 3000 x 1500 mmtravel x / y: 2200 x 900 mmworking feed: 7 mm/sectank capacity: 66 lworking pressure: 30-250 bartotal power requirement: 18,5 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3500 x 3500 x 3700 m2. STANDARD EQUIPMENTFRAME- Welded steel frame- Frame and plates are precision-milled using a CNC milling machine- Chrome-plated cylinder- Worktop with threaded holesHYDRAULICS- Bosch Rexroth hydraulic pump- Hydrapack or Badestons hydraulic directional control valve- Hydraulic block in accordance with EN standards- 1000-liter hydraulic oil tank- Pressure adjustment via pressure transmitter/regulatorELECTRICS- Control cabinet in accordance with EN standards- All cables are labeled and clearly arranged- All electrical components are from SiemensCONTROL PANEL- Stroke control in any position- X, Y, a ...

Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: Paul Müller, single-column eccentric press type ExP 45 -Pressure capacity: 45 tons -Clutch: Manual operation -Stroke: adjustable 4 - 80 mm -Table size: 465 x 690 mm -Table cutout: 220 x 175 mm -Protrusion: 230 mm -Punch hole: Ø 38 mm -Insertion height 300 mm -Dimensions: 1300/950/H2050 mm -Weight: 2220 kg

Hydraulic press manufactured in 1995. This EXNER EX SBR 200 features a pressing force of 2000 kN and a drive power of 78 kW. With an oil capacity of 1400 liters and a weight of 52000 kg, this machine is designed for robust performance. If you are looking to get high-quality pressing capabilities, consider the EXNER EX SBR 200 hydraulic press we have for sale. Contact us for further details.

pressure: 80.0 tstroke: 250 mmtable surface area: 1040 x 260 mmcolumn travel between the guideways: 1040 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 5.5 kWweight of the machine ca.: 835 kg.dimensions of the machine ca.: 1810 x 700 x 2100 mmEquipment:- robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Including round steel chain and 2x locking bolts Piston rod with metric mount- 1x set of V-block prism support- Pressure gauge for pressure display- Simple manual operation with : 1x feed speed 1x working speed 1x retraction speed- piston can be stopped in any position- Hydraulic tank permanently mounted on the side- operating inst ...

Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible.

Key data: 100 t

Qty. 1 Second-hand dross press machine – already dismantled and in storage Mfc.: Altek Model 100 with 10 x 181S Pan Sets Built: 2021 Dismantled: 2024 Cycle time for pressing: 6 – 8 min./ pan Capacity: 95 metric tonnes of dross/month 21 days/month = 4.523 mt/day 32 skims/day = 141 kg/skim The pan set dimensions are as follows PANSET MODEL Width Depth Stack-up height Stack-up weight Pan Capacity [MM] [MM] [MM] (kgs) m^3) (kgs) 181S 1016 813 543 1032 0.12 181

CONTROLS  PLC LAUER SLIDE  total force (nominal): 320 to  stroke: 200 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 10 mm/s  working velocity max.: 44 mm/sCOUNTER RAM  nominal force: 63 to  stroke: 30 mmV-RING  nominal force: 100 to  stroke: 30 mmTOOL DIMENSIONS  lower table (left-right): 500 mm  lower table (front-back): 500 mm  upper table (left-right): 695 mm  upper table (front-back): 730 mm  shut height max.: 650 mmDECOILER  sheet width max.: 250 mm  sheet width (min): 40 mm  coil weight max.: 1250 to  max. diameter of coil: 1300 mmLEVELLER UNIT  sheet width max.: 250 mm  sheet thickness max.: 5 mm  sheet thickness min.: 0.8 mm  number of leveller rolls: 11   feed velocity min.: 4 m/min  feed velocity max.: 12 m/minSTRIP-FEEDER  feeder type: grip feeder   sheet width max.: 250 mm  sheet th ...

Hydraulic press manufactured in 2014. This WIS ATEVI Druckgeber ATeVi Heidel features a ram stroke of 800 mm and a closing force of 500 kN. It has a machine weight of 19,500 kg and includes a Siemens S7 control system. If you are looking to get high-quality hydraulic pressing capabilities, consider the WIS ATEVI Druckgeber ATeVi Heidel machine we have for sale. Contact us for further details.

Key data: 1 t

Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or manual release, fine adjustment without UVV, pressure and stroke! Fully functional, can be visited under power

Press force: 16,000 kNMax. ram stroke: 1,700 mmMax. opening between table and ram: approx. 2,450 mmMin. opening: 770 mmRam plate: 4,500 × 2,500 mmTable size: 4,500 × 2,500 mmRapid traverse: 350 mm/sWorking speed at 66% press force: 23 mm/sWorking speed at 100% press force: 13 mm/sMax. return speed: 220 mm/sMax. retraction force: 1,600 kNRam cushion:Force: 2,000 kNStroke: 150 mmPressure plate: 3,650 × 1,580 mmTable cushion:Force: 2 × 1,000 kN or 3 × 500 kNStroke: 300 mmPressure plate: 1,550 × 700 mmDrive:Main motors: 2 × 132 kWMotor filter unit: 4 kWMotor speed: 1,500 rpmSuitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces.

Hydraulic press with a pressing force of 5,000 kN or 500 t.Manufacturer: Maschinenfabrik EXNER GmbH & Co. KGType: EXSBRD 500ETMachine No.: 10461Year of manufacture: 2001Max. stroke length: 1,300 mmMax. opening: 1,800 mmMin. opening: 500 mmTable size: 2,550 × 2,000 mmFrame passage: 2,570 mmTool dimensions: 2,200 × 1,800 mmMax. tool weight: 25,000 kgWorking speed: 26 / 50 mm/sRapid traverse speed: 400 mm/sOverrun distance: 97 mmOverrun time: 158 msSafety distance: 252 mmDrive power: 159 kWOil capacity: approx. 2,800 liters

pressure: tdistance between columns: mmstroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jessinegg + Urban, Stroke 300, Lift: 300, table 450x370, 1300kg

Key data: 25 t

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

SPIERTZ F2E32-22 320T mechanical press was built in 1982 in Germany. The machine is designed for series and mass production of parts used in the automotive and machinery industries. It enables the cold forming of metals, such as blanking, stamping, and forming of large-sized parts. All these operations are performed with a press force of 320 tons. The drive system of the SPIERTZ F2E32-22 press is based on a flywheel and an eccentric gear that converts the rotational motion of the shaft into the reciprocating motion of the slider. This solution ensures smooth machine operation and high machining repeatability. Tools are positioned on the work table with centring pins and then fixed to the table and the slider with bolts. The SPIERTZ F2E32 320T press also stands out for its rigid design, which ensures reliable operation in demanding production conditions. Technical Specifications of the ...

Schaal SEP 80 SZV 302 Automatic Punching Press Machine • 2001 • ID: 34126 Frame and guidance on this unit are built for repeatability: a rigid double-column O-frame in vibration-damping cast iron, with the ram carried in 6-point play-free roller guides. Power is transmitted by a flywheel drive with pneumatic clutch/brake combination. Year of manufacture is 2001. Control and protection - Unidor electronic control system giving repeatable stroke accuracy and fast setup; integrated tool safety device protecting dies from damage caused by misfeeds or incorrect part positioning, which reduces downtime and tooling costs. Key data - pressing force 800 kN (80 tons); 60 – 320 min⁻¹; ram stroke adjustable 8 – 80 mm; ram adjustment 80 mm; ram surface 700 × 500 mm; clamping plate 830 × 700 mm at 80 mm thickness; table opening 500 × 200 mm; strip feed clearance 120 ± 40 mm; drive po ...