1,738 presses used for sale

Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm

CONTROLS  electronic controls PRESS DESIGN  drive system: hydraulic   openings in uprights: yes   table cushion: yes PRESS FORCES  total force (nominal): 100 toPRESS TABLE  table surface (left-right): 800 mm  table surface (front-back): 600 mmSLIDE  slide force: 100 to  table surface (left-right): 700 mm  table surface (front-back): 500 mm  stroke: 600 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 400 mm/s  working velocity min.: 10 mm/sDIE CUSHION (TABLE CUSHION)  number of cushions: 1   working principle: hydraulical EJECTOR (TABLE EJECTOR)  number of ejectors: 1 ELECTRICAL SPECIFICATIONS  total power consumption: 44 kW  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS & ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 100920 €: 1907.39 €: 220 to: 4050 mm: Y1 / Y2 / X Achse : 265 mm: 3600 mm: 450 mm: 530 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 250 l: 22 kW: 5250 mm: 1770 mm: 3000 mm: 14750 kgStandard accessories:3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning t ...

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 25400 €: 485.14 €: 40 to: 1250 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 1750 mm: 950 mm: 1900 mm: 1640 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  electronic controls SCHMIDT PRESS FORCES  total force (nominal): 0.25 toPRESS TABLE  table surface (left-right): 180 mm  table surface (front-back): 150 mmSLIDE  slide force: 0.25 to  stroke: 100 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 35 kg

Offer 25374 Specifications: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 1000 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil filling quantity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 3250 x D 1850 mm - Weight approx. 4600 kg

A Reis spotting press for tool and mold making is available. Pressing force: 1000kN, clamping area: 1200mm/1500mm, installation height: 1575mm, max. mold weight: 10000kg, max. tilting plate load: 4000kg, ram stroke: 1450mm, return force: 400kN, hydraulic pressure: 190bar, pneumatic pressure: 5bar. Machine dimensions X/Y/Z: approx. 3200mm/4500mm/4100mm. Documentation available. On-site inspection possible.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 37600 €: 718.16 €: 40 to: 1550 mm: X und Y Achse : 160 mm: 1260 mm: 320 mm: 380 mm: hydraulisch : 90 mm/s: 10 mm/s: 600 mm: 845 mm: 100 mm: 120 l: 5,5 kW: 2000 mm: 1600 mm: 2235 mm: 3450 kgNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslight barriersintermediate pieces for the upper tool clampingdie seat and diedie seat with 4 V openingssplit upper tool, slightly cranked, dividedpedaluser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:laser safety device FiesslerNC controlled R axismanual crowning tablemotorized crowning tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 8254 : prompt, Zwischenverkauf v : Türkei : 22240 €: 1 : 30 to: 1250 mm: X und Y Achse : 150 mm: 1010 mm: 255 mm: 265 mm: hydraulisch : 210 mm/s: 10 mm/s: 3 kW: 1760 mm: 1375 mm: 2135 mm: 1700 kgDEMO MACHINE, MINT CONDITIONNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslight barriersdie seat and diedie seat with 4 V openingssplit upper tool, slightly cranked, dividedpedaluser manual in GERMANincl. laser protection device Fiessler(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 20800 €: 399.36 €: 70 to: horizontal verschiebbar : 500 mm: 700 mm: 900 mm: 20 mm/s: 2 mm/s: 1700 mm: 1000 mm: 2400 mm: 1050 kgHORIZONTAL MOVABLE CYLINDER550 MM2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 123713 €: 1869.21 €: 98900 €: 320 to: 4050 mm: Y1 / Y2 / X Achse : 365 mm: 3600 mm: 450 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 154 mm: 250 l: 18.5 kW: 5250 mm: 1770 mm: 2850 mm: 20000 kgSpecial campaign until 23.12.2025Special price and SKY 22 control free of chargeStandard accessories:3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge o ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 20 t, 490 mm, 750 mm

Max. printing capacity: 20 ton Stroke length: 490 mm Stand width: 700 mm Table LxW: 700 x 750 mm Plunger LxW: 650 x 200 mm Equipped with: - Machine works both horizontally and vertically. - Tilts hydraulically. Country of origin: Netherlands Machine LxWxH: 110 x 110 x 250 cm Machine weight: 2,000 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10900 €: 209.28 €: 150 to: horizontal verschiebbar : 300 mm: 1070 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2110 mm: 1000 mm: 2480 mm: 1870 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 171300 €: 2591.19 €: 137100 €: 400 to: 4050 mm: Y1 / Y2 / X Achse : 365 mm: 3400 mm: 510 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 1050 mm: 154 mm: 250 l: 37 kW: 5750 mm: 2110 mm: 3640 mm: 27760 kgSpecial campaign until 23.12.2025Special price and SKY 22 control free of charge3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and b ...

- Decoiler- Max. width 350 mm- Clamping area coil internal 470 - 530 mm- Coil diameter 1500 mm- Work load 2000 Kg - Straigtner- Width 350 mm- Roll diameter 30 mm- Number off rolls 9 units- In feed rolls 2 units- In feed roll diameter 90 mm- Working speed 40 M/Min - Max. thickness 6 mm at 240 N/mm2- Max. Thickness 5 mm at 400 N/mm2 

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 15 toPRESS TABLE  table surface (left-right): 360 mm  table surface (front-back): 260 mmSLIDE  stroke rate (max.): 165 /minSLIDE (MECHAN. PRESS)  slide adjustment: 40 mm  stroke min.: 7 mm  stroke max.: 60 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 226 mmELECTRICAL SPECIFICATIONS  total power consumption: 1.15 kW  mains voltage: 400 VDIMENSIONS / WEIGHTS  total weight approx.: 630 kgATTACHMENTS (PRESSES)  safety guard / safety door: yes   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

TAURUS shear baler Year 2006 1700 ton cutting force Working hours about 3,500 Side compression force 2x250 longitudinal compression force 150 tons. Machine in very good condition Always serviced and serviced regularly It is sold with its 805 kw Perin generator with a 3000 liter tank

Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible.

This SCHMIDT Electric Press 343 was manufactured in 2016. It features a stroke of 100 mm, tool dimensions of 150 x 100 mm, and a maximum speed of 150 mm/s. The press force monitoring and two-hand operation ensure safety and precision. Ideal for tasks requiring up to 2.5 kN pressing force with a maximum of 4 kN. The machine is in very good condition, almost like new. Contact us for more information about this machine.

pressure: 320 tchamfer lenght: 4100 mmstroke: 350 mmtotal power requirement: 32 kWweight of the machine ca.: 23.500 kgdimensions of the machine ca.: 4300x2600x3400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 71300 €: 1347.57 €: 30 to: 300 mm: 500?800 mm: 600?900 mm: 550 mm: 100 mm/s: 18 mm/s: 165 mm/s: 11 kW: 1950 mm: 1900 mm: 2800 mm: 4850 kg: 160 bar: 12 to: 150 mm: 80 mm: 130 bar: 100 mm/sec.: 500x600 mmlight curtaincushionmanual and automatic workingmanual stroke adjustment by camshaft switchmaintenance free self lubricating 4-fold ram guidingpolster plate with T-slotsaccording to ",CE", rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 5000 €: 117.73 €: 40 to: fix : 900 mm: 900 mm: 1600 mm: 700 mm: 2050 (PSS: 2250) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 40 TL: 1 speed 4 mm/s, single-hand control with lever € 5.000,00 PSS 40 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 5.800,00 PSS 40 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 6.100,00 PSS 40: same as PSS 40 NC but with stroke 500 mm € 7.000,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 948 Type: LVH 2500 Producer: ŽĎAS Created: 1961 Parameters: Depth: 1800 mm Width: 3450 mm Height above ground: 4650 mm Weight: 85 000 kg Voltage: 220 / 380 V Mains frequency: 50 Hz Workforce: 2500 t Number of strokes: 20/min Height of the lifts: 500 mm Minimum plunger distance from the table: 900 mm Maximum plunger distance from the table: 1400 mm Table surface: 1050 x 1400 mm Plunger area: 1050 x 1200mm

Inv. Num. : 946 Type: LKO 315 Producer: ŠMERAL Created: 1956 Parameters: Length: 3600 mm Width: 1750 mm Height: 4600 mm Plunger stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Power requirement: 25 kW Voltage: 380 V Frequency: 50 Hz

FOR SALE FROM ESCRAPALIA - ZDAS LKDA-800 MECHANICAL ECCENTRIC PRESS – 800 TONS (DOUBLE UPRIGHT / DOUBLE CONNECTING ROD) Brand: ZDAS Model No.: LKDA 800/100 Year of manufacture: 1993 General repair: 2004 Strength: 800 tn Stroke: 100 mm Table: 2200 × 1500 mm Main motor: 75 kW Strokes per minute: 52 Total weight: 95,000 kg Dimensions: 9000 × 4000 × 2500 mm Overall height: 6600 mm Disassembled in operation. It is sold where it is and as it is. Visit available on request It uses and inspects more than 200 machines: lathe, milling machine, drill, grinding machine, saw, punching machine, bending machine and shear. Featured brands: Pinacho, Amutio Cazeneuve, Cumbre, Geminis, CMZ, Nicolás Correa, Zayer, Lagun, Ibarmia, Kondia, Danobat, Mebusa, Ajial, Geko, Samur, Sabi, Uniz, Lincoln Electric, Praxair, Solter, Galagar We load it on your transport Total Cleara ...

FOR SALE FROM ESCRAPALIA - TMP K664 MECHANICAL ECCENTRIC PRESS – 500 TONS (DOUBLE UPRIGHT / DOUBLE CONNECTING ROD) Brand: TMP Model No.: K664 Strength: 500 tn Stroke: 630 mm Table: 3200 × 1700 mm Main motor: 60 kW Strokes per minute: 15 Total weight: 160,000 kg Disassembled in operation. It is sold where it is and as it is. Equipment inspection visit available It uses and inspects more than 200 machines: lathe, milling machine, drill, grinding machine, saw, punching machine, bending machine and shear. Featured brands: Pinacho, Amutio Cazeneuve, Cumbre, Geminis, CMZ, Nicolás Correa, Zayer, Lagun, Ibarmia, Kondia, Danobat, Mebusa, Ajial, Geko, Samur, Sabi, Uniz, Lincoln Electric, Praxair, Solter, Galagar We load it on your transport Total Clearance Pricing Location: Fuenlabrada, Madrid (ES) Available until: December 18, 2025

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

pressure: 170 tchamfer lenght: 4050 mmvoltage: 3x400 Vweight of the machine ca.: 16300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 190000 €: 3591 €: 300 to: 500 mm: 5.000 x 3.050 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 5000 mm: 2600 mm: 18000 kg: horizontal verschiebbar : 3050 mm: 2.200 mm: 3.600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.