presses used for sale (1,699)

ram capacity: 2000 treturn capacity: 150 ttable-size: 1015 x 1050 mmram head dimension: 975 x 1050 mmdist. between pillars (left to right): 975 mmdayligth: 1000 mmdistance table/ram: 600 - 1000 mmram stroke: 400 mmtable height over floor: 800 mmheight over floor: 3650 mmTable ejector: 63 KNRam ejector: 650 KNTable ejector stroke: 100 mmRam ejector stroke: 100 mmLenght of ram slide guiding: 1400 mm: Idle speed downward: 235 mm/sworking feed: max. 20 mm/secWorking speed at 10000 KN: 14 mm/sWorking speed at 20000 KN: 5 mm/sIdle speed upward: 250 mm/sovertravel time: 220 mssafety distance: 352 mmtotal power requirement: 194 kWweight of the machine ca.: 105 tdimensions of the machine ca.: ca. 5,00 x 6,50 x 8,00 mTechnical data without engagement: sizing press with oil-hydraulic drive, hydr. and electrical control depending on UVV, light barrier (Comp. Sick), ejector in table and pusher!The  ...

Pressing tool, sheet metal former, forming tool, edging tool, folding tool, bending tool, die, die tool-Bending tool: Lower tool for bending machine / press 5 pieces-Length: 2x 300 mm / 1x 275/200/175 mm each-Groove width: 58/52 mm-Angle: 90°-Dimensions: see photos / technical drawing-Price/Delivery: complete-Transport dimensions: 450/300/H115 mm-Weight: 48.3 kg

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: forming tool/press tool adapter-Receptacle: Ø 40 mm-Bore: Ø 20 mm-Dimensions: Ø 70 x 135 mm-Weight: 2.6 kg

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: forming tool / press tool adapter MST Ø 85-Receptacle: Ø 40 mm-Receiving thread: M34-Dimensions: Ø 85 x 160 mm-Weight: 4.5 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate-Clamping plate: length 5020 mm-Plate thickness: 37 mm-Dimensions: 5020/500 / H255 mm-Weight: 1550 kg

Hydraulic press, single-column quick-cycle press, C-column press, oil-hydraulic press - Press force ram: 40 to -Clamping table: 800 x 560 mm -Insertion height: 750 mm - Projection: 300 mm -Max. Stroke: 350mm -Operation: two-handed -Dimensions: 1700/1350/H3200 mm -Weight: about 5000 kg

T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg

T-slot plate, clamping plate with dovetail grooves, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Dimensions: 455/365/H40 mm mm -Bore: Ø mm -Dovetail groove: 17 mm -Weight: 45 kg

pressing tool, sheet metal former, forming tool, ball forming tool-Pressing tool: ball forming tool-Radius: 50.11 mm-Hole: Ø 40 mm-Dimensions: Ø 165 x 270 mm-Weight: 18.4 kg

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table, intermediate plate for hydraulic press, eccentric press, milling machine-Dimensions: 930/700/H90 mm-Plate: massive-Bore in the middle: Ø 100 mm-Weight: 450 kg

Hydraulic press, single column press, C-column press, oil hydraulic press, hydraulic single column press -Handover: in current condition as viewed -Note: without hydraulic unit and control -Pressing force: 40 to -Piston rod: Ø 105 mm -max. stroke: 710 mm -Dimensions: 890/1570/H610 mm -Weight: 826 kg

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table-Dimensions: 1500/3510/H950 mm-Plate thickness: 20 mm-Plate is: with supporting ribs-1x T slot: 18 mm-with: detachable stop-Weight: 2600 kg

Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table-Dimensions: 1500/3516/H260 mm-Plate thickness: 30 mm-Plate is: with supporting ribs-1x T slot: 17 mm-Weight: 1800 kg

T-slot plate, measuring plate, measuring table, clamping plate with T slots, plate field, welding table, welding table -Dimensions: 620/1560/H260 mm -Plate thickness: 20 mm -Plate is: with supporting ribs -1x T-slot: 15 mm -Weight: 360 kg

Printing machine, embossing machine, stamping machine, rail stamping machine, embossing press, die cutter, pneumatic die cutter -Manufacturer: Stommel 6 Voos, embossing press, rail stamping machine on a solid base -Type: SV700/6/PE/EF -Band width: 13 mm, convertible -Individual components: see photos -Accessories: without other accessories -Dimensions: 820/520/H1680 mm -Weight: approx. 154 kg

A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible.

Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible.

Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available.

Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible.

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: molding tool/press tool-Profile: Ø 76 mm-Receptacle: Ø 40 mm-Dimensions: Ø 76 x 130 mm-Weight: 2.8 kg

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: forming tool / press tool clamp press tool-Receptacle: Ø 40 mm-Profile: Radius 20 mm-Dimensions: 140/46/H120 mm-Weight: 2.2 kg

Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible.

Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible.

Press force: 1000kN, rapid traverse force: 100kN, retraction force: 100kN, overrun time: 0.053s, power: 18.5kW, table dimensions X/Y: approx. 1000mm/800mm, clearance: 600mm, max. stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. Stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. 1800mm/2200mm/3700mm, control panel dimensions X/Y/Z: approx. 800mm/800mm/1600mm, external control cabinet dimensions: approx. 1600mm/500mm/1200mm. Without feed unit. On-site inspection is possible.

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: molding tool/press tool-Profile: Ø 98 mm-Receptacle: Ø 40 mm-Dimensions: Ø 98 x 185 mm-Weight: 7.4 kg

Press force: 160t, stroke adjustment: 20mm-140mm, stroke rate: 10-60 strokes/min, table dimensions X/Y: 1050mm/820mm, opening in table: 300mm/300mm, ram adjustment: 100mm. On-site inspection is possible.

Pressing force: 45t, cutting area: 1000mm², stroke adjustment: 20mm-100mm, ram adjustment: 45mm, stroke rate: 60 strokes/min, table dimensions X/Y: 730mm/500mm, opening in table: 180mm/180mm, table height: 710mm, ram area: 350mm/220mm. On-site inspection is possible.

Number of levels: 4, pressure beam: 4/level, hold-down device: 4/level, pressing length: 2000mm, pressing width: 1040mm, max. workpiece thickness: 80mm, total pressing pressure: 12t, effective depth: approx. 980mm, distance between outer edge uprights and outer edge uprights: 1940mm, machine dimensions X/Y/Z: approx. 2400mm/1700mm/2100mm. On-site inspection is possible.

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool-Die tool: molding tool / press tool 2-part-Profile: angle 90°-Receptacle: Ø 40 mm-Dimensions: 160/140/H345 mm-Weight: 40.1 kg