presses used for sale (1,732)

CONTROLS  PLC SIEMENS S5 SLIDE  total force (nominal): 160 to  stroke: 60 mmCOUNTER RAM  nominal force: 80 toV-RING  nominal force: 80 toTOOL DIMENSIONS  lower table (left-right): 560 mm  lower table (front-back): 600 mm  upper table (left-right): 560 mm  upper table (front-back): 600 mm  shut height max.: 335 mm  ram adjustment: 125 mm  distance between columns (H-frame): 630 mm  passline opening (free passage in side columns): 270 mmCROP SHEAR  cutting force: 150 kNDIMENSIONS / WEIGHTS  total weight approx.: 11000 kgATTACHMENTS -FINEBLANKING PRESS-  autom. tool clamping device: yes   decoiler: optional   waste cutter: yes   slug separator: optional very well maintained machine !2016 Overhaul by Fei ...

Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton

Press capacity: 30 ton Ram stroke adjustable: 16 - 40 mm Slide adjustment: 40 mm Shut height (stroke down, adjustment up): 230 +/- 20 mm Free lateral opening F-B: 170 mm Table surface area : 480 x 450 mm Slide area: 250 mm Number of strokes: 100 - 600 s.p.m. Required power: 5,5 kW Dimensions L x W x H: 2.150 x 1.200 x 1.160 mm Weight of machine approx.: 2,5 ton

Pressure total: 600 ton Ram stroke: 762 mm Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Table surface area : 3350 x 2134 mm Slide area: 3350 x 2134 mm Die cushion capacity in table: 180 ton Die cushion stroke: 305 mm Ejector in ram: 60 ton Ejector stroke in ram: 230 mm Number of strokes: 16 s.p.m. Required power: 90 kW Weight of machine approx.: 185 ton

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton

Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton

pressure: 6,3 tthroat: 200 mmstroke: 200 mmdayligth: 600 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,78 tdimensions of the machine ca.: - mHydraulic Press 63 kNStroke 200 mm, Throat 200 mm, feed rate: down 165 (28) mm/s, up 510 mm/s. Wheight 780 kg.Workspace: Table 450 x 380Drive: 2.2Movie: https://www.youtube.com/watch?v=tcxXfKlrFLYThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press capacity: 25 ton Ram stroke adjustable: 13 - 38 mm Slide adjustment: 51 mm Shut height (stroke down, adjustment up): 230 - 281 mm Max. die size: 430 x 360 mm Number of strokes: 100 - 1.500 s.p.m. Table surface area : 530 x 530 mm Required power: 18 kW Dimensions L x W x H: 2.075 x 1.355 x 2.620 mm Weight of machine approx.: 4,5 ton feeding speed: sheet width: 200 mm

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

Inv. Num. : 5261 Type: ZX 1250 Producer: EUROMAC Created: 2010 Parameters: Compressive force: 30 t Maximum sheet thickness: 8 mm Table length: 2520 mm Table width: 1900 mm Max. travel length of the X-axis: 2250 mm Max. travel length of the Y-axis: 1250 mm Automatic reduction in X: 10000 mm Maximum table load (even): 150 kg Maximum punching speed: 2000 1/min Max. workpiece weight: 60 mm Spindle power: 8.5 kW Machine length: 3980 mm Machine width: 3630 mm Machine weight: 7000 kg

pressure: 10 tstroke: 150 mmtoolpiece height max.: 100 mmspeed: 10 mm/sek.bending capacity max. - flat: 100 x 15 mmtotal power requirement: 1,5 kWweight of the machine ca.: 100 Kgdimensions: 1,2 x 0,8 x 0,4 mHorizontal bender- Incl. 2 set bending tool- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GB-A1500 Fully automatic high-speed bending center Bending length (mm): 1500 Bending height (mm): 4side160 4side170/2side350 4side350 Minimum molding size: (Fold 4 sides) (mm) 4 sides 160: 350250 4 sides 170/2 sides 350: 350250 4 sides 350: 350250 Maximum bending size (mm) 15001500 X-axis travel: 120 Y axis travel: 4 sides 160: 200 4 sides 170/2 sides 350 305 4 sides 350: 305 Z-axis travel: 4 sides 160: 170 4 sides 170/2 sides 350: 357 4 sides 350: 357 Pressing knife height: 4 sides 160: 177 4 sides 170/2 sides 350: 177 4 sides 350: 357 Number of axes: suction cup: 11 Pressure arm: 14 Machine power (KW) suction cup: 34.7 Pressure arm: 36.35 Maximum bending thickness of aluminum plate (mm): 3 Maximum bending thickness of iron plate (mm): 2 Maximum bending thickness of stainless steel (mm): 1.5 Maximum bending speed (s/knife)  ...

diameter: 5 mmshaft length: 40 mmcutting lenght max.: 56 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mData on the machine type:Double-pressure rotor pressApplication: Screw productionMake: HilgelandYear of manufacture: 1990Max. wire diameter: 5 mmMax. shaft length: 40 mmMax. wire section length: 56 mmMax. output: 600 pieces/minMachine is fully operationalViewing possible by appointmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace

pressure: 100 tstroke: 400 mmtable surface area: 920 x 560 mmdayligth: 900 mmdistance between columns: 300 mmHeads: 175x115 mmfeed down: 7,6 mm/secfeed up: 13,4 mm/sectotal power requirement: 4,0 kWweight of the machine ca.: 1000 kgdimensions of the machine ca.: 1600x850x2450 mmDomestic equipments:- Stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material requirements - CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 350 mmstroke: 130 mmstroke of worktool slide: 3070 Hub/minram adjustment: 100 mmram surface: 500x300 mmtable surface area: 1000x600 mmfeed - rapid adjustment: total power requirement: kWweight of the machine ca.: 9,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8223 Type: HPDB 400 Producer: Hydrap Created: 1989 Parameters: Compressive force: 400 t Total power requirement: 11 kW Ram stroke: 300 mm Machine weight: 32000 kg Equipment: Adjustable lower table

Key data: 1000 t

All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. Optimized Electrical System – Cl ...

pressure: 20 tstroke: 150 mmdayligth: 700 mmOverall size: 670x870x1900 mmweight of the machine ca.: 200 kgDomestic equipments:- Stable welded construction- manually via hand lever- Pressure gauge via pressure gauge- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 120 tstroke: 400 mmdayligth: 900 mmfeed down: 5,8 mm/secfeed up: 9,5 mm/secHeads: 200x125 mmtotal power requirement: 6 kWweight of the machine ca.: 1250 kgdimensions of the machine ca.: 1900x1000x2450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tstroke: 400 mmFrame Width: 450 mmcolumn daylight: 1300 mmcylinder diameter: 170 mmwork height max.: 900 mmFront light range: 1400 mmLateral light range: 450 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2600 kgdimensions of the machine ca.: 2500x1100x2800 mmAccessories / equipment:- stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material supports adjustable in height by cylinder- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tstroke: 400 mmdayligth: 900 mmHeads: 225x135 mmfeed down: 6,2 mm/secfeed up: 9,8 mm/sectotal power requirement: 6 kWweight of the machine ca.: 1.300 kgdimensions of the machine ca.: 1640x1000x2550 mmAccessories / equipment:- stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material supports adjustable in height by cylinder- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tstroke: 400 mmtotal power requirement: 4,0 kW: 7,4 mm/s: 11,5 mm/sHeads: 160x95 mmweight of the machine ca.: 725 kgdimensions of the machine ca.: 1560x850x2400 mmDomestic equipments:- Stable welded construction- Pressure cylinder laterally adjustable- Electric control via lever / manual over hand lever- Pressure gauge via pressure gauge- Material supports per cylinder in the height adjustable- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60 tostroke: 400 mmdayligth: 900 mmHeads: 150x95 mmfeed up: 5,6 mm/secfeed down: 9,4 mm/secweight of the machine ca.: 700 kgtotal power requirement: 4 kWOverall size: 1460x850x2400 mmFurther information:stable welded constructionPrinting cylinder adjustableOperation electrically via shift lever / manually via hand leverPressure display by manometerHeight of material supports adjustable by cylinderCE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WMW - VEB PEEV 40/11Capacity: 40 ton Weight: 2400 kg

Raskin raskinCapacity: 50 ton Table area: 420 x 360mm