presses used for sale (1,732)

pressure: 200 tthroat: 510 mmstroke: 16 - 160 mmram - range of adjustment: 120 mmtable surface area: 1500 x 1000 mmtable height over floor: 900 mmhole in the table: 800 x 250 mmram surface: 1000 x 700 mmtool hole in ram: 65 x 110 mmT-slot - width: 28 mmnumber of strokes adjustable: 30 - 120 minoil volume: Hydraulikaggregat 5 ldaylight, max. stroke above - ram adjustment above: 600 mmdaylight (stroke down, ram adjustment above): 440 mmtotal power requirement: 32,2 kWweight of the machine ca.: 24 tdimensions of the machine ca.: BxTxH 2,85 x 3,1 x 3,65 m- hydraulic clutch- fixed table- hydraulic overload protection in the ram- hydraulic connecting rod clamping- Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed- fully automatic stroke adjustment, adjustment range 16 - 160 mm- Ram weight compensation- electronic OT correction- Planetary ge ...

pressure: 105 tchamfer lenght: 3100 mmdistance between columns: 2600 mmtable width: 100 mmtable height: 750 mmControl: DELEM DA 65 dayligth: 200 mmworking feed: 0 - 10 mm/secreturn speed: 0-100 mm/secrapid traverse - up: max. 100 mm/secvoltage: 380 V / 50 Hztotal power requirement: 11 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4 x 2,2 x 2,8 mEquipment:• CNC-control DELEM DA65 graphic video• manual back-off turning• upper and lower tool• 2 manual control / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tthroat: 1140 mmstroke: 600 mmtable surface area: 2000x1000 mmPlate: 4000x1000x300 mmram head dimension: 2000x1040 mmCylinder: 300 mmDaylight: 650 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 3,9x4x4,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 280 mmstroke: 160 mmtable surface area: 560 x 500 mmram surface: 280 x 280 mmdayligth: 400 mmoil volume: ca. 360 ltotal power requirement: 22 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 1,45 x 1,75 x 2,67 m- Workroom enclosure with Sick light barrier- Large ram with ejector and pin clamp- foot switch- Motorized depth stop in the cylinderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 tstroke: 250 mmdaylight longitudinal/sideways: 800 x 215 mmdayligth: 170 - 885 mmworking pressure: 7,5 - 8.5 barweight of the machine ca.: 0,45 tdimensions: 1,2 x 0,8 x 2,1 mmHydraulic/pneumatic workshop pressCylinder can be moved sidewayspneumatic foot pedalWinch for table height adjustment2 pcs. pressing blocksCE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Amada Promac press brake, 50 tons of pressure and 2 meters wide, additional tool palette, condition unknown, imported from Great Britain. 6000 + VAT

pressure: 100 tchamfer lenght: 3100 mmstroke: 215 mmsafety distance: 350 mmcolumn daylight: 3250 mmcompressed air: max. 8 barclosing speed: 200 mm/spressing speed: 1-->10 mm/secPressing force: 1000 KNMains voltage: 400 V 7,5 KW, 50 HZ Back-up fuse max.: 25 AT range L-W-H: 3450x2000x2800 mmtotal power requirement: 18,5 kWweight of the machine ca.: 8.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force 1500 kN Working width 3100 mm Stroke 200 mm Motor 11 kW Weight 9,600 kg

Key data: 25 t, 500 mm

almost unused NEHER screw press with clamping table

Specifications: - Max. working length 4060 mm - Column passage 3680 mm - Max. pressing force 1700 kN - Max. distance table / plunger 385 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported

with a brand-new slider also new stale gears and cleaned and painted parts Warranty for all brand new components 12 month. Die Holder included price . All parts of the press were subjected to technical inspection and the main components were replaced . · Completing the press with NEW STALE PARTS and components; · Brand New Ram 2024 - Brand new Pin 2024 · New stale drive hub 2023 · New stale Gear Big 2023 · New stale small gear 2023 · New stale eccentric shaft 2023 connecting rod is in stock Nominal force: 6300 ton Number of continuous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper position): 1150 mm Table adjustment: 15 mm Distance between press columns: 1950 mm Ram dimensions: -front to back: 1680 mm; -left to right: 1680 mm Table dimens ...

Šmeral Trnava Metal Lepa 63 PACategory: MetalBrand: Šmeral TrnavaModel: Lepa 63 PAYear of manufacturing: 1988Under power: Yes630 kN

Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.

press capacity: 2250 kNquantity of oil: 400 l: DNC 1200PS Eco/Col weight of the machine ca.: ca. 15.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: . mmstroke: . mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: . tdistance between columns: . mmdayligth: mmwork stroke: 250 mmflywheel: Ø mmtotal power requirement: kWweight of the machine ca.: ca. 730 kgdimensions of the machine ca.: mPlunger with adjustable prism guideThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand aluminium extrusion press line Mfc.: TCS, Asimakis, Sistem Teknic Force: 2200 MT Billet dia.: 8” Built: 1979 Still in operation! Type: Hydrauli horizontal Hydraulic pressure: 235 bar Scope of supply: Billet Loader Billet Furnace Hot Shear Billet Transfer Table Extrusion Press Run-Out Table Single Puller Cooling Table Stretcher Profile Stacker Ageing Furnace

pressure: 40 tstroke: 250 mmtotal power requirement: 6 kWweight of the machine ca.: 3 tdistance between columns: 600/350mm mmtable surface area: 860x620 mmram surface: 860x620 mmtable height: 900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 tdistance between columns: 1350/1000mm mmstroke: 500 mmweight of the machine ca.: 20 ttable surface area: 1900x1600 mmram surface: 1900x1600 mmtable height: 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Offer 25021 Technical data approx.: - Compressive force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Diarrhea hole in the table approx. 320 mm - Tappet area approx. 800 x 475 mm - Peg hole in the tappet mm - Plunger adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

Key data: 400 t, 160 mm

Nominal forming force of the press 400 t Table 1250x825 mm Dimensions of the ram 900x560 mm Lifting of the ram 30-160 mm Machine weight 22 T Power of the main electric motor 30 kW Dimensions L x W x H --> 1550 x 2900 x 3360 mm complete with press line = Production LASA, Spain year 2008 = - Decoiler 4 t - coil width 400 mm, coil outer diam. 1600 mm Coil inner diameter 450/550 mm, unwinding speed up to 25 m/min - Pre-feed machine RAPID PRESS max. width 420 mm, material up to 3 mm, max. speed 70 m/min - Documents, electrical diagrams, etc.

pressure: 125 tthroat: 330 mmstroke: 20-120 mmno. of strokes: 50 Hub/minram - range of adjustment: 100 mmtable surface area: 800x640 mmram surface: 500x400 mmhole in the table: Ø 330 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 8 tdimensions of the machine ca.: 1500x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 tthroat: 155 mmstroke: 6-60 mmno. of strokes: 84-210 Hub/minram - range of adjustment: 50 mm: 300 mmtable surface area: 300x450 mmtable height: 840 mmhole in the table: Ø 90 mmram surface: 190x278 mmtool hole in ram: Ø 25 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: BxTxH 1100x1100x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tstroke: 37 mmno. of strokes: 30-240 Hub/minram adjustment: 150 mmtable surface area: 1200x1000 mmhole in the table: 500x180 mmtool hole in ram: Ø52 mmtotal power requirement: 50 kWweight of the machine ca.: 35 tdimensions of the machine ca.: LxBxH 3700x2300x3900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 tthroat: 155 mmstroke: 6-60 mmno. of strokes: 84-210 Hub/minram - range of adjustment: 50 mm: 300 mmtable surface area: 300x450 mmtable height: 840 mmhole in the table: Ø 90 mmram surface: 190x278 mmtool hole in ram: Ø 25 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: BxTxH 1100x1100x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 tdistance between columns: 310 mmtable surface area: 320x310 mmram surface: 200x130 mmtable height: 740 mmno. of strokes: 100 Hub/minweight of the machine ca.: 1 tdimensions of the machine ca.: BxTxH 1200x1200x1600mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tdistance between columns: 310 mmno. of strokes: 80 Hub/minram - range of adjustment: 40 mmtable surface area: 400x300 mmram surface: 250x190 mmtable height: 960 mmtool hole in ram: Ø 35 mmweight of the machine ca.: 1,5 tdimensions of the machine ca.: BxTxH 1500x1500x2200 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 440 mmstroke: 8-100 mmno. of strokes: 65 Hub/minram - range of adjustment: 63 mmtable surface area: 720x750 mmram surface: 440x280 mmhole in the table: Ø 240 mmtable height: 830 mmtool hole in ram: Ø 40 mmweight of the machine ca.: ca. 5,0 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.