presses used for sale (1,706)

Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton

pressure: 6,3 tthroat: 200 mmstroke: 200 mmdayligth: 600 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,78 tdimensions of the machine ca.: - mHydraulic Press 63 kNStroke 200 mm, Throat 200 mm, feed rate: down 165 (28) mm/s, up 510 mm/s. Wheight 780 kg.Workspace: Table 450 x 380Drive: 2.2Movie: https://www.youtube.com/watch?v=tcxXfKlrFLYThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

diameter: 5 mmshaft length: 40 mmcutting lenght max.: 56 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mData on the machine type:Double-pressure rotor pressApplication: Screw productionMake: HilgelandYear of manufacture: 1990Max. wire diameter: 5 mmMax. shaft length: 40 mmMax. wire section length: 56 mmMax. output: 600 pieces/minMachine is fully operationalViewing possible by appointmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace

pressure: 100 tstroke: 400 mmtable surface area: 920 x 560 mmdayligth: 900 mmdistance between columns: 300 mmHeads: 175x115 mmfeed down: 7,6 mm/secfeed up: 13,4 mm/sectotal power requirement: 4,0 kWweight of the machine ca.: 1000 kgdimensions of the machine ca.: 1600x850x2450 mmDomestic equipments:- Stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material requirements - CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 350 mmstroke: 130 mmstroke of worktool slide: 3070 Hub/minram adjustment: 100 mmram surface: 500x300 mmtable surface area: 1000x600 mmfeed - rapid adjustment: total power requirement: kWweight of the machine ca.: 9,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 tstroke: 150 mmdayligth: 700 mmOverall size: 670x870x1900 mmweight of the machine ca.: 200 kgDomestic equipments:- Stable welded construction- manually via hand lever- Pressure gauge via pressure gauge- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 120 tstroke: 400 mmdayligth: 900 mmfeed down: 5,8 mm/secfeed up: 9,5 mm/secHeads: 200x125 mmtotal power requirement: 6 kWweight of the machine ca.: 1250 kgdimensions of the machine ca.: 1900x1000x2450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tstroke: 400 mmFrame Width: 450 mmcolumn daylight: 1300 mmcylinder diameter: 170 mmwork height max.: 900 mmFront light range: 1400 mmLateral light range: 450 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2600 kgdimensions of the machine ca.: 2500x1100x2800 mmAccessories / equipment:- stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material supports adjustable in height by cylinder- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tstroke: 400 mmdayligth: 900 mmHeads: 225x135 mmfeed down: 6,2 mm/secfeed up: 9,8 mm/sectotal power requirement: 6 kWweight of the machine ca.: 1.300 kgdimensions of the machine ca.: 1640x1000x2550 mmAccessories / equipment:- stable welded construction- Pressure cylinder laterally adjustable- Electric control via selector lever / manually via hand lever- Pressure gauge via pressure gauge- Material supports adjustable in height by cylinder- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tstroke: 400 mmtotal power requirement: 4,0 kW: 7,4 mm/s: 11,5 mm/sHeads: 160x95 mmweight of the machine ca.: 725 kgdimensions of the machine ca.: 1560x850x2400 mmDomestic equipments:- Stable welded construction- Pressure cylinder laterally adjustable- Electric control via lever / manual over hand lever- Pressure gauge via pressure gauge- Material supports per cylinder in the height adjustable- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60 tostroke: 400 mmdayligth: 900 mmHeads: 150x95 mmfeed up: 5,6 mm/secfeed down: 9,4 mm/secweight of the machine ca.: 700 kgtotal power requirement: 4 kWOverall size: 1460x850x2400 mmFurther information:stable welded constructionPrinting cylinder adjustableOperation electrically via shift lever / manually via hand leverPressure display by manometerHeight of material supports adjustable by cylinderCE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 105 tchamfer lenght: 3100 mmdistance between columns: 2600 mmtable width: 100 mmtable height: 750 mmControl: DELEM DA 65 dayligth: 200 mmworking feed: 0 - 10 mm/secreturn speed: 0-100 mm/secrapid traverse - up: max. 100 mm/secvoltage: 380 V / 50 Hztotal power requirement: 11 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4 x 2,2 x 2,8 mEquipment:• CNC-control DELEM DA65 graphic video• manual back-off turning• upper and lower tool• 2 manual control / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tthroat: 1140 mmstroke: 600 mmtable surface area: 2000x1000 mmPlate: 4000x1000x300 mmram head dimension: 2000x1040 mmCylinder: 300 mmDaylight: 650 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 3,9x4x4,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 tstroke: 250 mmdaylight longitudinal/sideways: 800 x 215 mmdayligth: 170 - 885 mmworking pressure: 7,5 - 8.5 barweight of the machine ca.: 0,45 tdimensions: 1,2 x 0,8 x 2,1 mmHydraulic/pneumatic workshop pressCylinder can be moved sidewayspneumatic foot pedalWinch for table height adjustment2 pcs. pressing blocksCE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 25 t, 500 mm

almost unused NEHER screw press with clamping table

Specifications: - Max. working length 4060 mm - Column passage 3680 mm - Max. pressing force 1700 kN - Max. distance table / plunger 385 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported

Šmeral Trnava Metal Lepa 63 PACategory: MetalBrand: Šmeral TrnavaModel: Lepa 63 PAYear of manufacturing: 1988Under power: Yes630 kN

Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.

press capacity: 2250 kNquantity of oil: 400 l: DNC 1200PS Eco/Col weight of the machine ca.: ca. 15.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand aluminium extrusion press line Mfc.: TCS, Asimakis, Sistem Teknic Force: 2200 MT Billet dia.: 8” Built: 1979 Still in operation! Type: Hydrauli horizontal Hydraulic pressure: 235 bar Scope of supply: Billet Loader Billet Furnace Hot Shear Billet Transfer Table Extrusion Press Run-Out Table Single Puller Cooling Table Stretcher Profile Stacker Ageing Furnace

pressure: 40 tstroke: 250 mmtotal power requirement: 6 kWweight of the machine ca.: 3 tdistance between columns: 600/350mm mmtable surface area: 860x620 mmram surface: 860x620 mmtable height: 900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 tdistance between columns: 1350/1000mm mmstroke: 500 mmweight of the machine ca.: 20 ttable surface area: 1900x1600 mmram surface: 1900x1600 mmtable height: 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Offer 25021 Technical data approx.: - Compressive force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Diarrhea hole in the table approx. 320 mm - Tappet area approx. 800 x 475 mm - Peg hole in the tappet mm - Plunger adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

Key data: 400 t, 160 mm

Nominal forming force of the press 400 t Table 1250x825 mm Dimensions of the ram 900x560 mm Lifting of the ram 30-160 mm Machine weight 22 T Power of the main electric motor 30 kW Dimensions L x W x H --> 1550 x 2900 x 3360 mm complete with press line = Production LASA, Spain year 2008 = - Decoiler 4 t - coil width 400 mm, coil outer diam. 1600 mm Coil inner diameter 450/550 mm, unwinding speed up to 25 m/min - Pre-feed machine RAPID PRESS max. width 420 mm, material up to 3 mm, max. speed 70 m/min - Documents, electrical diagrams, etc.

pressure: 125 tthroat: 330 mmstroke: 20-120 mmno. of strokes: 50 Hub/minram - range of adjustment: 100 mmtable surface area: 800x640 mmram surface: 500x400 mmhole in the table: Ø 330 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 8 tdimensions of the machine ca.: 1500x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 tthroat: 155 mmstroke: 6-60 mmno. of strokes: 84-210 Hub/minram - range of adjustment: 50 mm: 300 mmtable surface area: 300x450 mmtable height: 840 mmhole in the table: Ø 90 mmram surface: 190x278 mmtool hole in ram: Ø 25 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: BxTxH 1100x1100x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tstroke: 37 mmno. of strokes: 30-240 Hub/minram adjustment: 150 mmtable surface area: 1200x1000 mmhole in the table: 500x180 mmtool hole in ram: Ø52 mmtotal power requirement: 50 kWweight of the machine ca.: 35 tdimensions of the machine ca.: LxBxH 3700x2300x3900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.