presses used for sale (1,713)

Key data: 200 t

Horizontal Hydr. Straightening and bending press, 200 tons, hand and foot control, hydraulics. 18kw, with bending tools.

Offer 25275 Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 200 mm/sec - Return 450 mm/sec - Installation height 800 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - E. footswitch - 2 hand control panel - Drive 400 V / 12.5 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2200 kg

Offer 25274 Hydraulic – single-column press with drawing cushion Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 200 mm/sec - Return 450 mm/sec - Installation height 800 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - Drawing cushion 10 t - E. footswitch - 2 hand control panel - Drive 400 V / 12.5 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2400 kg

Offer 25272 Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 0 - 2.4 m/min - Return 0 - 12 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - E. footswitch - 2 hand control panel - Drive 400 V / 8.75 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2000 kg

Offer 26015 Technical data: - Max. pressing force approx. 160 t - Max. ram stroke approx. 300 mm - Double-acting cylinder with hydraulic return - Max. retraction force 110 T - Stand width approx. 1540 mm - Table width 1500 mm - Table depth 1000 mm - Table height 590 mm - Max. installation height approx. 850 mm - Drive 400 V / 11 kW - Space requirement with unit approx. W 2350 x H 2200 x D 1750 mm - Weight approx. 3500 kg

Key data: 1 t

Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or manual release, fine adjustment without UVV, pressure and stroke! Fully functional, can be visited under power

Jessinegg + Urban, Stroke 300, Lift: 300, table 450x370, 1300kg

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-45834-176

pressure: 100 tstroke: 220 mmdaylight between the columns: 1190 mmdayligth: 700 mm: 190 mmdiameter of piston: 120 mmtable surface area: 1600 x 800 mmweight of the machine ca.: 1,3 tdimensions of the machine ca.: 1,9 x 1,4 x 2,0 mSide-adjustable cylinderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-45833-176

Key data: 25 t

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

Key data: 40 t, 1280 mm, 900 mm

For sale is a spotting press from the manufacturer REIS with a maximum pressing force of 40 t. The machine has a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm and a stroke of up to 1,100 mm, making it suitable for spotting work, coordination processes and tool adjustments in mold and tool making. Technical data + information: Spotting press – 40 t – 1,280 × 900 mm General information - Type: 4-column press - Manufacturer: REIS - Year of construction: 1984 - Press force: 40 T (adjustable) - Restoring force: 20 T - Distance between columns: 930 × 705 mm - Max. installation height: 1,035 mm - Table size: 1,280 × 900 mm - Overall dimensions (WxDxH): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm Hydraulic cylinders - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm  ...

CONTROLS  PLC SIEMENS S7 SLIDE  total force (nominal): 630 toTOOL DIMENSIONS  lower table (left-right): 900 mm  lower table (front-back): 900 mm  shut height max.: 900 mm

This 3-axis SXKH HMG-300JM hydraulic press was manufactured in 2014. It features a substantial table dimension of 2200 x 1800 mm and a weight capacity of 36000 kg. The machine operates with a forward speed of up to 4200 mm/min and has a power rating of 30 kW. If you are looking to get high-quality pressing capabilities, consider the SXKH HMG-300JM machine we have for sale. Contact us for further details.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98300 €: 1857.87 €: 135 to: 3050 mm: Y1 / Y2 / X und R Achse : 265 mm: 2600 mm: 410 mm: 530 mm: hydraulisch : 200 mm/s: 10 mm/s: 200 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 104 mm: 2x4 kW: 4200 mm: 1680 mm: 2750 mm: 9500 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows ...

pressure: 230 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmtable width: 200 mmajustment speed: 200 mm/secworking feed: 1-10 mm/secreturn speed: 135 mm/secstroke: 365 mmoil volume: 400 ltr.tiltable up to: +/- 10 mmtable height: 1050 mmdayligth: 535 mmtotal power requirement: 30,0 KWweight of the machine ca.: 18.210 kg.range L-W-H: 3700 x 2350 x 3120 mmEquipment:- DELEM - CNC control DA 65 controlled axes : Y1 - Y2 - X - R - Z1 - Z2- with CNC - crowning- backgauge- WILA hydr. upper tool clamping- hydr. lower tool clamping- Die displacement- front support arms- Various toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 40 t, 450 mm, 160 mm

Press force 400 kN , table 450x560 , ram 375x300 , distance table joints 340 stroke 160 , puncture hole 100 diameter, silky column passage 220x410

Key data: 300 t, 2 mm, 600 mm

Pressure: 300 tons Distance between the uprights 1800mm Side passages: Yes Installation height: 1000mm Table: 1800x1000mm Plunger: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemes S7 Controller Ground-level installation Sick Light Barrier Cushion: Stroke 200mm

Press brake Amada Astro HDS 1030 / NTR BJ 2010

pressure: 135 tchamfer lenght: 2550 mmdistance between columns: 2050 mmcontrol: CYBELEC ModEva 10 S total power requirement: 25 kWweight of the machine ca.: 11.000 kgdimensions of the machine ca.: mMachine:- Sturdy machine frame constructed as a fully welded all-steel structure- Pressure beam with high bending strength- Electrohydraulic top drive via proportional valves- Modern block hydraulic systemOptional equipment:- Increase in installation height and stroke by 150 mm each- Backgauge system 2 - 2 axes, R-axis adjustment 150 mm- 2 x additional stop fingers 2/4-axes, however, offset by 20 mm- CNC holding device- Distance from the bending line to the holding device approx. 240 mm- EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering- EHT lower tool clamping, mounting width 55 mm, pneumatic- Hardened insert strip for EHT lower tool clam ...

pressure: 50 tchamfer lenght: 1550 mmdistance between columns: 1150 mmControl: CYBELEC DNC 1200 PS Eco column arm: 405 mmtable height: 900 mmstroke of ram: 400 mmdistance between table / ram: 720 mmtotal power requirement: 9,5 kWweight of the machine ca.: 5.200 kgdimensions of the machine ca.: 2000x1900x2920 mmAccessories/Equipment:- CYBELEC DNC 1200 PS Eco controller- 2 support arms- 4 stop fingers- Lasersafe- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 170 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke: 400 mmweight of the machine ca.: 15.300 kgdimensions of the machine ca.: mMachine:- Sturdy machine frame- Press beam- Spherical bearing for the press beam with press beam tilt- Electro-hydraulic top drive- Block hydraulic system- Length measuring system (Y-axis) with dynamic spring compensation- Control cabinet air conditioning unit- Adapter strip for tool mounting- 2 stop fingersOptional equipment:- 2-axis backgauge (XM/XS, R)- 1 sheet metal holding device 200 daN CNC- 2 x additional stop fingers 2/4-axis- 1 x pneumatic upper tool clamping 26 mm- 1 x pneumatic lower tool clamping 55 mm- 1 x lower tool shift EHT pneumatic- 1 x CNC crowning device 3000 kN/m- 1 x Operator Safety Guard PILZ PSENvip Productive- 2 x Bending aid 1500 N- 1 x Support strips for bending aid- 1 x Parking position right, short- 1 x Spec ...

PRESS DESIGN  drive system: eccentric / crank   table cushion: yes PRESS FORCES  total force (nominal): 100 to  nominal work capacity: 1000 kNmPRESS TABLE  table surface (left-right): 1100 mm  table surface (front-back): 660 mm  thickness of bolster plate: 100 mmSLIDE  table surface (left-right): 640 mm  table surface (front-back): 420 mm  spigot hole diameter: 50 mm  stroke: 130 mm  stroke rate (max.): 60 /minSLIDE (MECHAN. PRESS)  slide adjustment: 110 mm  stroke min.: 20 mm  stroke max.: 130 mmDIE CUSHION (TABLE CUSHION)  number of cushions: 1 TOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 450 mm  distance table - slide max.: 580 mmELECTRICAL SPECIFICATIONS  total power consumption: 7.5 kW  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1610 mm  space requiremen ...

pressure: 100 tstroke: 300 mmtable surface area: 500 x 1520 mmcolumn travel between the guideways: 1520 mmdayligth: 680 mmpressure: max. 244 barweight of tools max.: 270 kgajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secoil volume: 90.0 lvoltage: 400 Vtotal power requirement: 7.5 kWweight of the machine ca.: 2700 kgdimensions of the machine ca.: 2630 x 1000 x 2350 mm current new price approx. 18.000 euros special price on request according to previous owner rarely in useEquipment:- robust electro-hydraulic workshop/bending press left right guided- with fixed working cylinder- Pressing depth adjustable by cams- Height-adjustable work table- 2x locking bolts for table fixation- 3x directional control valve supply-empty-return- Stepless adjustment of working pressure- 1x freely movable 2-hand operation- Original operating instructionsThe data for this ad was crea ...

PRESS DESIGN  drive system: hydraulic SLIDE  total force (nominal): 40 to  stroke: 45 mm  stroke rate (max.): 110 /minTOOL DIMENSIONS  lower table (left-right): 300 mm  lower table (front-back): 280 mm  shut height max.: 90 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 1835 mm  space requirements -front/back-: 1500 mm  total height: 1800 mm  total weight approx.: 2500 kg

CONTROLS   SIEMENS SIMATIC PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 160 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 970 mmSLIDE  stroke rate (max.): 90 /minSLIDE (MECHAN. PRESS)  slide adjustment: 120 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 3200 mm  space requirements -front/back-: 1600 mm  total height: 4400 mm  total weight approx.: 32000 kg

SLIDE  total force (nominal): 40 to  stroke rate (max.): 110 /minTOOL DIMENSIONS  lower table (left-right): 300 mm  lower table (front-back): 280 mm  shut height max.: 180 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 1835 mm  space requirements -front/back-: 1500 mm  total height: 1800 mm  total weight approx.: 2500 kg

SLIDE  total force (nominal): 80 to  stroke rate (max.): 120 /minV-RING  stroke: 90 mmTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2970 mm  space requirements -front/back-: 1665 mm  total height: 242 mm  total weight approx.: 6000 kg

PRESS DESIGN  quick die change system: yes SLIDE  total force (nominal): 100 to  stroke: 20 mm  stroke rate (max.): 80 /minTOOL DIMENSIONS  lower table (left-right): 430 mm  shut height max.: 220 mmApprox. 79 million strokes