presses used for sale (1,825)

CONTROLS  PLC SIEMENS SIMATIC HMI SLIDE  total force (nominal): 320 to  stroke: 200 mmCOUNTER RAM  nominal force: 63 toV-RING  nominal force: 100 toTOOL DIMENSIONS  shut height max.: 360 mmDIMENSIONS / WEIGHTS  total weight approx.: 18000 kgThe system was fitted with a new control unit approximately 1.5 years ago

- Adjustable sheet arms front side- Parking stattion sheet arms left side- WILA Crowning- Under power

Table dimensions ( x-y/mm)  1200 x 1000 Slide Dimensions X-Y (mm)  1200 x 1000 Stroke (mm)  190 Slide Adjustment (mm)  150 Shut Height (mm)  700 Accessories  oven with max temperature 500°

A hydraulic two-column press brake Atlantik is available. Press force: 135t, bending length: 3000mm, throat depth: 250mm, ram stroke: 120mm, overrun time: 84ms, safety distance: 134mm, machine dimensions X/Y/Z: approx. 3500mm/1700mm/2300mm, weight: approx. 6800kg. An on-site inspection is possible.

Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible.

Stage Press / Eccentric Press Erfurt Pressen Erfurt 3, Maintenance No. 156, press force 320 t, year of construction approx. 1980, with 15 press punches, electronic transfer line, conversion by PBK, system consisting of double unwinding reel PBK, straightener PBK, feed, blank cut (Machine is partially dismantled after defect, without tools)

Key data: 315 t, 310 mm, 250 mm

Condition used Press capacity 315 t Stroke 250 mm Daylight 310 mm Table size (left to right) 320 mm Table size (front to back) 385 mm Table height 1250 mm Speed at max. press force 7.5 mm/sec Pressure speed at f max. 0.3 mm/sec Return speed 24 mm/sec Oil quantity 390 l Driving power 380 V/ 50 Hz/ 2.2 kW Dimensions 1950 x 800 x 2000 mm Height of machine above floor 2000 mm Total weight 2.4 t Mode of operation oil hydraulic Calibrating presses Description Contact the seller for more information Interested in this machine?

CONTROLS  PLC SIEMENS SIMATIC OP 27 PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1000 mmSLIDE  stroke: 600 mmSLIDE (HYDR. PRESS)  return force: 38 toDIE CUSHION (TABLE CUSHION)  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS  total weight approx.: 43000 kg

PRESS FORCES  total force (nominal): 1000 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1300 mmSLIDE  stroke: 500 mm

CONTROLS  PLC SIEMENS SIMATIC OP 27 PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1000 mmSLIDE  stroke: 600 mmSLIDE (HYDR. PRESS)  return force: 38 toDIE CUSHION (TABLE CUSHION)  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS  total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 46131

CONTROLS  PLC SIEMENS SIMATIC OP 27 PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1000 mmSLIDE  stroke: 600 mmSLIDE (HYDR. PRESS)  return force: 38 toDIE CUSHION (TABLE CUSHION)  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS  total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 32510

CONTROLS  PLC SIEMENS SIMATIC OP 27 PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1000 mmSLIDE  stroke: 600 mmSLIDE (HYDR. PRESS)  return force: 38 toSLIDE EJECTOR / CUSHION  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS  total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 47037

CONTROLS  PLC SIEMENS SIMATIC PANEL PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 400 toPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1300 mmSLIDE  stroke: 700 mmDIE CUSHION (TABLE CUSHION)  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1100 mmMachine hours: 14060

CONTROLS  conventional PRESS FORCES  total force (nominal): 160 toPRESS TABLE  table surface (left-right): 1000 mm  table surface (front-back): 850 mmSLIDE  stroke: 705 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1205 mmMachine hours: 78571

Weight, kgs 5100

CONTROLS  PLC SIEMENS S7 SLIDE  total force (nominal): 630 toTOOL DIMENSIONS  lower table (left-right): 900 mm  lower table (front-back): 900 mm  shut height max.: 900 mm

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: servohydraulic   frame design: H-frame, tie rod   quick die change system: yes   feedstock transport direction: left to right SLIDE  total force (nominal): 1100 to  stroke: 130 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 330 to  stroke: 40 mmV-RING  nominal force: 500 to  stroke: 40 mmTOOL DIMENSIONS  lower table (left-right): 960 mm  lower table (front-back): 960 mm  upper table (left-right): 960 mm  upper table (front-back): 960 mm  shut height max.: 470 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 500 mm  sheet thickness max.: 16 mm  coil weight max.: 8 to  feedstock transport direction: left to right COIL CHAIR  coil weight max.: 8 to  stroke: 700 mmDECOILER  coil weight max.: 8 to  max. diameter of coil: 1800 mm  mandrel expansion range from: 47 ...

Weight, kgs 2055

Weight kg, 2450

Press brake Durmazlar ES 3006 BJ 2011

We offer used sintering presses in very good condition ready for immediate use. The best thing to do is to contact me if you are interested, then I can send you all the technical details as well as corresponding further pictures and videos and illustration To the entire facility New price was completely about 3 million euros

We offer used sintering presses in very good condition ready for immediate use. The best thing to do is to contact me if you are interested, then I can send you all the technical details as well as corresponding further pictures and videos and illustration To the entire facility New price was completely about 3 million euros

Key data: 160 t

Press force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Plunger: 750 x 450 mm Projection: 360 mm Speed from: 200 mm Speed on: 125 mm Height of the machine: approx. 3,450 mm Weight: approx. 7,000 kg Connection: 17 kW Machine can be sold in original condition or overhauled with current UVV

Key data: 250 t

Press force: 2500 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm (1200 x 630 mm) Plunger: 750 x 450 mm (900 x 550 mm) Projection: 360 mm Speed from: 200 mm Speed on: 110 mm Height of the machine: approx. 3,600 mm Weight: approx. 9,000 kg Connection: 20.5 kW Machine can be sold in original condition or overhauled with current UVV

Nominal pressing force 4,000 kN Plunger stroke, adjustable in steps 30160 mm Plunger adjustment 180 mm Projection 515 mm Idle stroke rate 45 / min Option: infinitely variable 10 ... 60 / min Tool installation height at maximum stroke bottom and top adjustment 660 mm Table clamping area (WxD) 1,700 x 1,000 mm Table height above floor 1,005 mm Plunger clamping surface (WxD) 1,100 x 800 mm Pin hole in plunger 65 mm Main motor power 45 kW Height of the machine approx. 4,325 mm Weight of the machine 33,000 kg Control system - press safety control with redundant design and self-diagnosis as well as a status and error display in plain text Stepless stroke rate control in the range of 1060 strokes/min via ABB frequency converter Control variant -touchscreen TFT color incl. electronic cam switchgear with tool control and too ...

The BSTA 50UL is a Bruderer high-speed precision stamping press rated at 500 kN (50 tons) nominal force, engineered for continuous progressive-die production at variable stroke rates from 100 to 1,120 strokes per minute. The press is equipped with a Bruderer BBV 202/120 strip feeder, delivering strip widths up to 203 mm and handling material thicknesses up to 2 mm. Adjustable stroke is set between 16 and 51 mm, with strip inlet height adjustable across a 50–140 mm range to accommodate varying tooling and material profiles. Nominal force: 500 kN (50 tons) Tool monitoring: Unidor Stroke rate: 100–1120 strokes per minute (variable) Strip feeder: Bruderer BBV 202/120 Adjustable stroke: 16–51 mm Mounting space / clamping plate: 760–940 mm Main drive: 22 kW Power supply: 400 V / 50 Hz Table area: 940 x 580 mm Strip inlet height (adjustable): 50–140 mm Max. strip width: 2 ...

The Bruderer BSTA 80H is an 80-ton high-speed stamping press built for heavy-duty progressive-die production, fitted with a BBV 320/200 strip feeder and Unidor tool monitoring. In stock in Pforzheim, ready for inspection. Nominal force: 800 kN (80 tons) Tool monitoring: Unidor Stroke rate: 100–1,000 spm Strip feeder: Bruderer BBV 320/200 Adjustable stroke: 16–63 mm Clamping plate area: 970 mm Main drive: 43 kW Power supply: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Strip inlet height (adjustable): 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: approx. 15,550 kg Operating hours (main drive): approx. 28,067 h More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request

Table dimensions ( x-y/mm) 800 x 800 Stroke (mm) 170 Stroke per minute 32 Power of the ejector in the slide ( ton) 10 Stroke of the ejector in the slide (mm) 100

Offer 26175 Technical data: - Max. pressure capacity up to 25 t - Max. plunger stroke 160 mm - Installation height without straightening unit 675 mm - Projection to the middle of the ram 250 mm - Table size approx. 1300 x 300 mm - Working speed AB approx. to max. 30 mm/s - Working speed to approx. 100 mm/s - Oil filling quantity approx. 150 ltr - Drive 400 V / 10 kW - Space requirement approx. W 4900 x H 2400 x D 1500 mm - Weight approx. 3000 kg - with: - Straightening table extension 2030 + 1520 mm - Transfer carriage with mounts on straightening table - Lace intake - Roll recording - Directional stamp - Swivel switch with dial gauge

Key data: 200 t

Press brake – 200 T – Open width 1,600 mm For sale is a hydraulic press brake from the manufacturer DURENDUS with a maximum press force of 200 t. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm and a stroke of 1,000 mm, making it suitable for bending, forming and straightening work in industrial use. Technical data + information: Press brake – 200 T – Open width 1,600 mm General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Type: 2-column frame press - Manufacturer: DURENDUS - Press force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Usable area ram: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg Hydraulic cylinders - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylin ...