presses used for sale (1,713)

Nominal pressing force ... 250t Table dimensions... 1120 x 800mm Slab dimensions ... 800 x 475mm Plunger adjustment ... 110mm L x W x H ... 1350 x 2550 x 2915mm Machine weight ... 13000kg Number of strokes ... 45/min Control Siemens The machine is in good condition, possible to test under power.

Equipment Description Used Indirect Extrusion Press • Brand / Model: SMS Hasenclever 28 / 31.5 MN McKechinstrang” • Type: Horizontal indirect extrusion system for non-ferrous billets • Drive: Mechanical main unit with hydraulic auxiliaries • Country of Origin: Germany • Current Status: Dismantled and available for dispatch • Serial No. / Year of Manufacture: [To be confirmed] 2. Key Technical Specifications Parameter Value Main Piston Force 25.07 MN Total Press Force with Coupling 31.23 MN Max Stroke 3,070 mm Working Stroke 2,825 mm Ram Speed at 28 MN 0–64 mm/sec Ram Speed at 31.5 MN 0–57 mm/sec Billet Diameter Range Ø 230–355 mm Billet Length (cold) 320–1,320 mm Receiver Heating System Resistance; max 63 kW / 375 °C Shear Force 0.64 MN Profile Ejector Force 0.31 MN Actuation Differential Cylinders Ø 280/200 3. Included Components • B ...

pressure capacity max.: 80 tStroke: 500 mmtable surface area: 960 x 810 mmspindle pitch: 72 daylight between the columns: 950 / 540 mmpassage: 640 mmmachine weight ab.: 4500 kgdimensions of the machine ca.: 2,0 x 2,0 x 3,85 mHydraulic quick adjustment 500mmFlywheel Ø2000mm4 prism bases for straightening wavesdifferent support framesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25200 Specifications: - Pressure capacity 200 t - Working width 3100 mm - Passage between the uprights 2600 mm - Table width 180 mm - Projection 300 mm - Installation height 450 mm - Feed speed 80 mm/sec. - Working speed 9 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Drive 400 V / 18.7 kW - Space requirement approx. W 3300 x H 2950 x D 1900 mm - Weight approx. 10500 kg - with: - Adjustment of the crimping depth + baling pressure -Mot. Backgauge with handwheel fine adjustment - 4-fold universal die - sharpening tool - Two-hand control panel, foot switch,

Offer 25227 Specifications: - Pressure capacity 150 t - Working width 3600 mm - Passage between the uprights 3150 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Feed speed 70 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2300 x D 1600 mm - Weight approx. 8700 kg - with: - Swivel arm – control panel with ATL 550 control - For crimping depth + backgauge -Mot. Backgauge - Crowning device - Lasersafe FIESSLER - 4-fold universal die, split sharpening tool + deer's foot tool - Two-hand control panel, foot switch,

High: 2.050 mm, Long: 750 mm, Force: 10 tons, Width: 600 mm, Weight: 800 Kg., Neckline: 150 mm, Stem travel: 200 mm, Rate of climb: 10 cm / sec, Piston rod ø of: 65 mm, Surface of the table: 300 x 300 mm., Specification: Hydraulics

Two T-slot tables, High: 2.500mm, Long: 1.700mm, Pump: 18L / mm, Force: 5 TN, Width: 1.000mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics

T-slot table, High: 2.500 mm, Long: 1.700 mm, Pump: 18 L / mm, Force: 5 TN, Width: 1.000 mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Step between uprights: 200 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics

punching pressure: ca. 3,2 tair pressure: 8 barstroke: max. 20 mmdistance between columns: ca. 250 x 200 mmweight of the machine ca.: 52 kgincl. various tools, see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure power: 6-8 barAir consumption: 8 l/Hubheight of stroke: 12 mm: 134 mmno. of strokes: 400 Hub/minpunching force max.: 3500 kpweight of the machine ca.: 80 kgSchüco pneumatic press for Schüco punching toolsArt. No. Schüco: 290 124manual includedvarious pressing tools included!tool nr. 283073, 280162,299259,283492, 283072, 282867, 282644, 282663, 282868, 283071, 2830722 quick-release levers for secure and quick fastening of the press toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Camu decoiler 3 ton Dimeco straightener - 800 x 1,1 mm - 11 x 60 mm straightening rolls - 4 x 60 mm feeding rolls - weight: 850 kg CNC mircrofeeding unit Pressix excentric press - 100 ton - 65 strokes/min - adjustable stroke: 10 gt; 130 mm - table: 950 x 660 mm - max opening: 370 mm

pressure: 500 tdistance between columns: 1220 mmmax. ram stroke: 600 mmdistance table/ram, max. stroke up, adjustment up: 1000 mmtable surface area: 1600 x 1200 mmdie-cushion pressure inside the table: 320 tstroke of drawing cushion in table: 150 mmdrawing cushion surface in table: 750 x 812 mmdie-cushion pressure in pusher: 180 tstroke of drawing cushion in pusher: 100 mmdrawing cushion surface in pusher: 750 x 625 mmram surface: 1600 x 1200 mmtable height over floor: 800 mmfeed down: 665 mm/secfeed up: 530 mm/secworking feed: 34 - 100 mm/secquantity of oil: 2000 lpower capacity: 180 kWweight: 40 tdimensions of the machine ca.: 3,2 x 2,4 x 7,5 mby using oil-hydraulic drive, hydraulic and electric controlUVV, die cushion in bed and slide, adjustable drawing speed, punching limit with damping plunger lock, electric cabinetOur list price is WITHOUT starting the machine,just as it isThe da ...

pressure: 40 tdistance between columns: 495 mmstroke: 150 mmdistance table/ram, max. stroke up, adjustment up: 300 mmtable surface area: 490 x 400 mmhole in the table: 50 mmtable height over floor: 950 mmcolumn travel -side: 155 mmram surface: 150 mmfeed down: 480 mm/secfeed up: 480 mm/secworking feed: 20 mm/secoil volume: 115 lpower capacity: 7,5 kWweight: 2,2 tdimensions of the machine ca.: 1,35 x 1,00 x 2,21 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: 280 mmstroke: 8 - 112 mmno. of strokes: 30 - 120 Hub/mindistance table/ram, max. stroke up, adjustment up: 500 mmtable surface area: 840 x 580 mmhole in the table: 150 mmtable height over floor: 910 mmpassage to the back: 640 mmram surface: 560 x 300 mmram adjustment: 80 mmpower capacity: 7,5 kWtotal power requirement: kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 1,4 x 2,3 x 3,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 200 mmstroke: 8 - 80 mmno. of strokes: 180 Hub/mindistance table/ram: 330 mmtable surface area: 550 x 400 mmhole in the table: 60 mmtable height over floor: 800 mmtable height over floor: 800 mmpassage to the back: 200 mmram surface: 355 x 220 mmram adjustment: 50 mmpower capacity: 2,5 kWtotal power requirement: kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1,2 x 1,8 x 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mmplate thickness: 16 mmpre-bending: / weight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressing Force max.: 2000 Kn, Withdrawal force max.: 1500 Kn, Supporting force in pressing position max.: 1200 Kn, Die return force max.: 50 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 90 mm, Withdrawal travel max.: 90 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 60 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 26,0 Kw, Width aprox.: 2350 mm, Depth aprox.: 3500 mm, Height aprox.: 5900 mm, Weight of the press aprox.: 19.900 Kg, Press housing: 260 l (gear oil), Workplace-related sound: 78 dB (A)

pressure: 125 tno. of strokes: 55 Hub/minstroke: 20 - 160 mmtable-size: 970 x 660 mmmax. ram stroke: 160 mmmin. ram stroke: 20 mmthroat: 340 mmtotal power requirement: 11 kWweight of the machine ca.: tdimensions of the machine ca.: 1,5 x 3,0 x mWith motor, gear reduction, wheel protection, air friction clutch, additional brake(Make Desch) and safe control according to UVV,Mech. Overload protection in the ramTwo-hand operation, control cabinetThe price is ex stock as the press is, is, or is.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 280 mmstroke: 8 - 100 mmno. of strokes: 65 Hub/minram adjustment: 63 mmtable surface area: 620 x 500 mmdistance table/ram, max. stroke up, adjustment up: 415 mmhole in the table: 230 mmtable height over floor: 800 mmram surface: 310 x 255 mmpower capacity: 5,5 kWtotal power requirement: kWweight of the machine ca.: 3,95 tdimensions of the machine ca.: 1,20 x 1,80 x 2,40 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand aluminium extrusion press line Code Aluminium HE9 6063 Mfc.: Indian manufacturer Built: 1978 PLC hydraulic – upgradation done in the year 2005! Total Force of Press: 680 MT, 750 UST Extrusion Pressure: 210 Bar Billet Diameter: 5”, 121 mm Weight per Inch of Billet: 0.76 kg/inch Scope of supply: Log heating furnace Hot shear Extrusion press Overhead puller Under-bed cooling system Run-out cooling bed Belt conveyor Stretcher Cutting machine Die oven Conveyor table Conveyor for final packaging

Mechanical Dorst TPA 45, Pressing Force max. 450 Kn, Withdrawal force max. 250 Kn, Supporting force in pressing position max. 130 Kn, Die return force max. 60 Kn, Upper punch stroke 120 mm, Upper punch adjusting travel 70 mm, Number of strokes 6-22 1/min, Filling height max. 120 mm, Pressing travel max. 60 mm, Withdrawal travel max. 60 mm, Top pressing travel max 6 mm, Upper punch pneumatic preload max. 30 mm, Compressed air supply , Air consumption , Intake air aprox. 70 l/min, Total connected load aprox. 14,0 Kw, Press dimensions:, Width aprox. 1550 mm, Depth aprox. 1650 mm, Height aprox. 2200 mm, Weight of the press aprox. 3900 Kg, Oil filling quantity :, Press housing 45 l (gear oil), Workplace-related sound 79 dB (A)

Pressing Force max.: 1000 Kn, Withdrawal force max.: 800 Kn, Supporting force in pressing position max.: 600 Kn, Die return force max.: 40 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 85 mm, Withdrawal travel max.: 95 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 80 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 23,0 Kw, Width aprox.: 1950 mm, Depth aprox.: 1550 mm, Height aprox.: 3900 mm, Weight of the press aprox.: 9.900 Kg, Press housing: 180 l (gear oil), Workplace-related sound: 78 dB (A)

Pressing Force max: 1400 Kn, Withdrawal force max: 1100 Kn, Die return force max: 70 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 220 mm, Number of strokes: 5-18 1/min, Filling height max: 180 mm, Pressing travel max: 90 mm, Withdrawal travel max: 90 mm, Top pressing travel max: 18 mm, Total connected load aprox: 25,0 Kw, Width aprox: 1950 mm, Depth aprox: 1750 mm, ISO 9001: 2008 CERTIFIED COMPANY, Height aprox: 4380 mm, Press housing: 240 l (gear oil), Workplace-related sound: 78 dB A

plate width: 3200 mmplate thickness: 83 mmpre-bending: 72 mmroll diam. toproll: 700 mmroll diam. bottom roll: 650 mmside roll diameter: 550 mmdistance between columns: 3300 mmroll drive: 93,2 kWturning speeds: 2 - 4 m/mintotal power requirement: - kWweight of the machine ca.: 78 tdimensions of the machine ca.: 9 x 3,3 x 3,4 m4 –Roll Bending Machine- 4 roll Pinch bending- Pre-bending- Tilting function-- Hydraulic front bearing tilting speed: 450mm/min-- Hydraulic tilting of top roll: 250mm/min- CE2 Units availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand: DELLAVIA Model: Livorno Screw diameter: 125 mm Maximum allowable pressure: 200 tons Clearance between uprights below the guides: 320 mm Clearance between uprights within the guides: 240 mm Ram stroke: 280 mm Table dimensions: 300 x 400 mm Distance from table to guides: 230 mm Overall dimensions: 1.430 x 1.050 x 2.980 mm (H) Approx. weight: 2.900 kg

pressure: 400 tdistance between columns: 600 mmstroke: 600 mmtable-size: 3000 x 1500 mmtravel x / y: 2200 x 900 mmworking feed: 7 mm/sectank capacity: 66 lworking pressure: 30-250 bartotal power requirement: 18,5 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3500 x 3500 x 3700 m2. STANDARD EQUIPMENTFRAME- Welded steel frame- Frame and plates are precision-milled using a CNC milling machine- Chrome-plated cylinder- Worktop with threaded holesHYDRAULICS- Bosch Rexroth hydraulic pump- Hydrapack or Badestons hydraulic directional control valve- Hydraulic block in accordance with EN standards- 1000-liter hydraulic oil tank- Pressure adjustment via pressure transmitter/regulatorELECTRICS- Control cabinet in accordance with EN standards- All cables are labeled and clearly arranged- All electrical components are from SiemensCONTROL PANEL- Stroke control in any position- X, Y, a ...

An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible.

pressure: 130 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmControl: Cybelec weight of the machine ca.: 11.600 kgdimensions of the machine ca.: 4000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With Automatic Strip Feeder BBV 190 500 kN | 100–1120 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 500 kN Stroke rate: 100–1120 strokes per minute Working hours: 41000 h Main motor: 22 kW Control voltage: 24V DC Power connection: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 /44 / 51 mm Shut height adjustment: 64 mm Working Dimensions: Max tool installation width: 1100 mm Strip pass width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Strip entry height adjustable: 60–140 mm Max strip width: 120 mm Max feeding pitch: 85 mm Max material thickness: 4 mm Feeding angle: 180 Deg Machine Dimensions (with BBV 190): Machine footprint (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV  ...