presses used for sale (1,637)

Qty. 1 Second-hand aluminium extrusion press line Code Aluminium HE9 6063 Mfc.: Indian manufacturer Built: 1978 PLC hydraulic – upgradation done in the year 2005! Total Force of Press: 680 MT, 750 UST Extrusion Pressure: 210 Bar Billet Diameter: 5”, 121 mm Weight per Inch of Billet: 0.76 kg/inch Scope of supply: Log heating furnace Hot shear Extrusion press Overhead puller Under-bed cooling system Run-out cooling bed Belt conveyor Stretcher Cutting machine Die oven Conveyor table Conveyor for final packaging

Mechanical Dorst TPA 45, Pressing Force max. 450 Kn, Withdrawal force max. 250 Kn, Supporting force in pressing position max. 130 Kn, Die return force max. 60 Kn, Upper punch stroke 120 mm, Upper punch adjusting travel 70 mm, Number of strokes 6-22 1/min, Filling height max. 120 mm, Pressing travel max. 60 mm, Withdrawal travel max. 60 mm, Top pressing travel max 6 mm, Upper punch pneumatic preload max. 30 mm, Compressed air supply , Air consumption , Intake air aprox. 70 l/min, Total connected load aprox. 14,0 Kw, Press dimensions:, Width aprox. 1550 mm, Depth aprox. 1650 mm, Height aprox. 2200 mm, Weight of the press aprox. 3900 Kg, Oil filling quantity :, Press housing 45 l (gear oil), Workplace-related sound 79 dB (A)

Pressing Force max.: 1000 Kn, Withdrawal force max.: 800 Kn, Supporting force in pressing position max.: 600 Kn, Die return force max.: 40 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 85 mm, Withdrawal travel max.: 95 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 80 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 23,0 Kw, Width aprox.: 1950 mm, Depth aprox.: 1550 mm, Height aprox.: 3900 mm, Weight of the press aprox.: 9.900 Kg, Press housing: 180 l (gear oil), Workplace-related sound: 78 dB (A)

Pressing Force max: 1400 Kn, Withdrawal force max: 1100 Kn, Die return force max: 70 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 220 mm, Number of strokes: 5-18 1/min, Filling height max: 180 mm, Pressing travel max: 90 mm, Withdrawal travel max: 90 mm, Top pressing travel max: 18 mm, Total connected load aprox: 25,0 Kw, Width aprox: 1950 mm, Depth aprox: 1750 mm, ISO 9001: 2008 CERTIFIED COMPANY, Height aprox: 4380 mm, Press housing: 240 l (gear oil), Workplace-related sound: 78 dB A

plate width: 3200 mmplate thickness: 83 mmpre-bending: 72 mmroll diam. toproll: 700 mmroll diam. bottom roll: 650 mmside roll diameter: 550 mmdistance between columns: 3300 mmroll drive: 93,2 kWturning speeds: 2 - 4 m/mintotal power requirement: - kWweight of the machine ca.: 78 tdimensions of the machine ca.: 9 x 3,3 x 3,4 m4 –Roll Bending Machine- 4 roll Pinch bending- Pre-bending- Tilting function-- Hydraulic front bearing tilting speed: 450mm/min-- Hydraulic tilting of top roll: 250mm/min- CE2 Units availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tdistance between columns: 600 mmstroke: 600 mmtable-size: 3000 x 1500 mmtravel x / y: 2200 x 900 mmworking feed: 7 mm/sectank capacity: 66 lworking pressure: 30-250 bartotal power requirement: 18,5 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3500 x 3500 x 3700 m2. STANDARD EQUIPMENTFRAME- Welded steel frame- Frame and plates are precision-milled using a CNC milling machine- Chrome-plated cylinder- Worktop with threaded holesHYDRAULICS- Bosch Rexroth hydraulic pump- Hydrapack or Badestons hydraulic directional control valve- Hydraulic block in accordance with EN standards- 1000-liter hydraulic oil tank- Pressure adjustment via pressure transmitter/regulatorELECTRICS- Control cabinet in accordance with EN standards- All cables are labeled and clearly arranged- All electrical components are from SiemensCONTROL PANEL- Stroke control in any position- X, Y, a ...

An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible.

pressure: 130 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmControl: Cybelec weight of the machine ca.: 11.600 kgdimensions of the machine ca.: 4000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With Automatic Strip Feeder BBV 190 500 kN | 100–1120 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 500 kN Stroke rate: 100–1120 strokes per minute Working hours: 41000 h Main motor: 22 kW Control voltage: 24V DC Power connection: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 /44 / 51 mm Shut height adjustment: 64 mm Working Dimensions: Max tool installation width: 1100 mm Strip pass width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Strip entry height adjustable: 60–140 mm Max strip width: 120 mm Max feeding pitch: 85 mm Max material thickness: 4 mm Feeding angle: 180 Deg Machine Dimensions (with BBV 190): Machine footprint (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV  ...

Inv. Num. : 8438 Type: AF-200-75 Producer: Arisa Generated: Parameters: Maximum retraction speed: 200 t Top table length: 950 mm Top table width: 750 mm Maximum number of strokes: 20 1/min Ram stroke: 250 mm

Inv. Num. : 8437 Type: 50-VE Producer: IMS Created: 2002 Parameters: Compressive force: 50 t Maximum stroke rate per minute: 145 1/min Stroke: 80 mm Adjusting the ram: 75 mm Machine weight: 2300 kg

GERDA HYDOMAT PAWN 100 automatic press was built by GERDA HYDOMAT S.A. in Poland in 2001. The machine, with a high press force of 100 tonnes, is dedicated to the mass production of precision steel parts. All machining processes, i.e. precise stamping and threading of the workpieces, are performed fully automatically. The sheet metal feeder accurately feeds the material into the workspace, where the slider and reliable threading head are located. The design, which is made from the highest quality raw materials, in turn maintains the highest stability during even the most intensive challenges. The GERDA HYDOMAT hydraulic press weighs 5200 kg. Technical specifications of the GERDA HYDOMAT PAWN 100 press - press force: 100 t (1000 kN) - work table dimensions (L x W): 700 x 320 mm - height of working space: 250 mm - slider stroke: 0-70 mm - number of slider strokes: 10-40/min - numbe ...

Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton

Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Die cushion capacity in table: 80 ton Die cushion stroke: 250 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton

A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible.

pressure: - tthroat: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: - mmstroke: 8 - 116 mmtotal power requirement: 8 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: ca. 2,5 x 2,5 x 3,5 mNo. 0778Single-column eccentric press 1000 kNStroke adjustment 8-116 mm, stroke rate 65/min,ram adjustment 80mm,Space requirement2.1x 1.7 x 3.1 m,Weight approx. 7500 kgStand tiltable, 10°/20°/30°Working area: table 800 x 560Drive: 8 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2 x 2 x 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6 tdistance between columns: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1 x 1 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tstroke: 380 mmtable surface area: Arbeitsbreite 1100 mmpressure: 258 baroil volume: 46 dm³ajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 970 kgInner diameter of the cylinder [mm]: 220Piston rod diameter [mm]: 90Diameter piston crown [mm]: 120- Movable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision workThe 100 ton hydraulic press is equipped with a movable cylinder (left-right) and a height-adjustable work table. Over and beyondit has a pressure regulation, 2 speeds, a joystick anda hand pump for precision pressing.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 ttable length: 670 mmtable width: 570 mmtotal power requirement: 8 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 2 x 2 x 3 mNo. 2886Spotting press 200 kNRICE TUS 60 OK 20Stroke approx. 700Drive: 7,5 kWHydraulic controlExtendable table 670 x 570 mm,Swivel-out top plate 670 x 570 mm,Installation height 740 mmClearance between the columns 620 mm,Space requirement L/W/H 1870 x 1620 x 3000 mm,Weight approx. 3.5 to.Asking price: 8.500,-- ex works / EXWAsking price: 12.900,-- EXW warehouse loaded free on suitable truckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tstroke: 380 mmtable surface area: Arbeitsbreite 750 mmpressure: 259 baroil volume: 38 dm³ajustment speed: 2,87 mm/secwork speed: 9,5 mm/secreturn speed: 12 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 540 kgInner diameter of the cylinder [mm]: 170Piston rod diameter [mm]: 75Diameter piston crown [mm]: 100- Integrated pressure gauge- Pressure regulator- Hydraulic unit with 2 speeds- Working table adjustable in height- Joystick to move the piston up / downThe 60 ton workshop press has a fixed cylinder and aheight-adjustable work table (motorized). Equipped withPressure regulation, manometer, 2 speeds and a joystick for themove the piston up and down. With this joystick you can use the piston preciselymove, making this hydraulic press perfect for precision jobssuitable.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tdistance between columns: 550 mmstroke: 150 mmtotal power requirement: 11 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 3 y 3 x 2,5 mNo. 4105Hydraulic pressCompressive force max. 600 kNRam stroke 150 mmWeight approx. 4500 kgTable 500 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tdistance between columns: 680 mmstroke: 150 mmtotal power requirement: 15 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 3 x 3 x 3 mNo. 0214ydraulic high-speed double-column press SMG DS 63Clearance between the uprights 680 mm,max. distance between table top and ram 385 mm,Ejector force 15kN, largest ram stroke 150 mm.Working area: Table surface 660 x 460Drive: 15 kW pressing force 630 kN, retraction force 51 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tstroke: 400 mmtable surface area: Arbeitsbreite 1300 mmpressure: 243 baroil volume: 64 dm³ajustment speed: 5,73 mm/secwork speed: 1,84 mm/secreturn speed: 7,08 mm/sectotal power requirement: 3,0 kWweight of the machine ca.: 1690 kgInner diameter of the cylinder [mm]: 320Piston rod diameter [mm]: 140Diameter piston crown [mm]: 175- adjustable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision work- with digital displayThis 200 ton hydraulic press is equipped with a movable cylinder (left-right), a height-adjustable work table, a pressure regulator, 2speeds, a joystick and a hand pump for precision pressingfitted.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tstroke: 350 mmtable surface area: Arbeitsbreite 750 x 260 mmpressure: 221 baroil volume: 37 dm³work speed: max. 9,8 mm/secreturn speed: 14 mm/sectotal power requirement: 3 kWweight of the machine ca.: 385 kgInner diameter of the cylinder [mm]: 130Piston rod diameter [mm]: 55Diameter piston head [mm]: 80- Integrated pressure gauge- Pressure regulator- Hydraulic unit with variable speeds- Working table adjustable in height- Joystick to control piston and speedThe workshop press (30T) has a fixed cylinder and a highadjustable work table (motorized). Equipped with pressure regulation,Pressure gauge, variable speed and a joystick to move the piston up and downto move off. With this joystick you can also control the speedadjust, making this motorized hydraulic press perfect forprecision work is suitable.The data for this ad was created with ModulMWS - the software solution of Lo ...

pressure: 40 ttable length: 1280 mmtable width: 900 mmtotal power requirement: 7 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 3 x 2 x 3,6 m mNo. 5282Spotting press 400 kNREIS TUS 90 OK 40Working area: table 900 x 1280Column passage 930 x 705 mmTable top 900 x 1280 mmram plate 900 x 1200 mmInstallation height 1035 mmSpace requirement approx. 3 x 2 x 3.6 mTransport dimensions approx. 4 loading meters, width 2.20 / height 2.80Weight approx. 8 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tdistance between columns: 360 mmstroke: 400 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1.8x1.6x2.7 mwww.marcels-maschinen.chThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6,2 tchamfer lenght: 285 mm mmdistance between columns: 230 mmdayligth: 215 mmthroat: 70 mmstroke: 100 mmworking feed: 9,8 mm/secreturn speed: 50 mm/secquantity of oil: 10 lControl: DELEM DA 41T total power requirement: 0,7 kWweight of the machine ca.: 250 kgdimensions: 900 x 1300 x 550 mm• Basic version as a C-frame• Compact table model• Ideal for prototypes and small series• Very short setup time• Functionally simple• Wide range of applications• Low noise level• Low energy consumption• Easy handlingincluding special equipment:- CNC control DELEM DA 41TThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.