presses used for sale (1,820)

Key data: 100 t, 3150 mm

Press Brake HACO type PPM 36100 Command: ATL 550 Capacity: 3150 mm x 100 T Electric Back gear gauge travel: 800 mm Slide travel: 120 mm Year of construction: 1997 Throat depth: 250 mm Distance between uprights: 3150 mm Working Length: 3600 mm Motor power: 5,5 kW Voltage: 380 V Dimensions (L x W x H): 3900 x 1600 x 2300 mm Weight: approx 8 T

G+K spotting press HPV 60 S very good condition ! technical data see picture... available at short notice from location.

Max. pressing force: 25 kN Convertible to: 16 kN Max. working stroke: 25.3/60 mm Table size: 150 x 200 mm Diarrhea hole in the table: 15 mm Stroke adjustment: 290 mm Space requirement: 800 x 580 x 650 mm Weight: 51 kg

This high-speed precision stamping press, manufactured in 1987, delivers a maximum pressing force of 80 tons (800 kN) and is designed for demanding progressive-tool applications. With an operating range of 100–1000 strokes per minute, it combines high productivity with exceptional process stability. The machine features adjustable stroke lengths from 16 to 63 mm, a ram adjustment of 76 mm, and supports tools up to 970 mm width. A Bruderer BBV 202/120 strip feeder is included, allowing strip widths up to 202 mm and feed pitches up to 120 mm, ensuring precise material handling. The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners. Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 – 1000 SPM Main voltage: 40 ...

FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Specifications Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Feeder BBV 300 – fully synchronized mechanical strip feeder system ...

pressure: 3,3 bei 6bar tdayligth: 250 mmstroke: 70 mmwork stroke: 10 mmtable surface area: 220x190 mmthroat: 150 mmweight of the machine ca.: 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tstroke: 300 mmdaylight between the columns: 700 mmdayligth: 850 mm: 140 mmdiameter of piston: 60 mmtable surface area: 700 x 390 mmweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,2 x 0,8 x 2,2 mWorkshop Press- Movable cylinder- 2 support prisms- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 kN (20 T). Speed range: 100 – 1800 spm. Year of manufacture: 1996. Hours under power: 51574. Feed BBV 101/75 on the left-hand side. Max. strip width: 125 mm. Max. feed pitch: 85 mm. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm. Ram height adjustment: 51 mm. Dimensions of the clamping plate: 510 x 400 mm. Bed opening: 400 x 160 mm. Max. distance of the mold width between the columns: 410 mm. Max. strip passage width: 260 mm. Connected load: 51 kVA. Power 400 V 50 Hz. Control voltage: 24 V. Machine dimensions: H 2540 x W 1661 x D 855 mm. Machine weight: approx. 3100 kg. Control cabinet and control system. Including all original technical documentation. Machine is now under power. Sound cabin sold separately, not included in machine price.

Key data: 242 t

This is a 242 Ton x 12ft and deep 16" throat depth with 5 axis machine with auto crowning, a good variety of dies and punches including 2 bolsters and a nice 4way. Segment acute punches and dies also available with this machine. It is clean and fully operational. Machine is wired 208 3 phase.

General Specifications Nominal Force: 16,000 kN (1,600 metric tons) Total Machine Weight: 48,250 kg (48.25 metric tons) Work Space and Stroke Parameters Slide (Ram) Stroke: 180 mm Maximum Distance Between Bed and Slide (Shut Height): 1,160 mm (at bottom dead center) Slide Adjustment: 20 mm Bed (Table) Dimensions: 1,000 mm (width) x 1,250 mm (length) Performance and Electrical Parameters Continuous Stroke Rate: 25 min (25 strokes per minute) Main Drive Motor Power: 61 kW Overall Dimensions Length: 2,275 mm Width: 2,600 mm Height: 5,170 mm This specialized equipment is intended for accurate three-dimensional stamping, mintage, calibrating and extrusion of parts from sheet and graded metal

Key data: 15 t

C-Press – 15 T – 300 × 300 mm For sale is a C-press from the manufacturer DURENDUS with a maximum pressing force of 15 t. The machine has a table size of 300 × 300 mm, a maximum installation height of 350 mm and a stroke of 250 mm, making it suitable for press-fit work, assembly processes and small series production in industrial use. Technical data + information: General information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15 T - Table size: 300 × 300 mm - Plunger plate: 300 × 300 mm - Max. installation height: 350 mm - Working height: 800 mm - Total height: approx. 2,000 mm - Total width with control cabinet: approx. 900 mm - Total depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Plunger plate guide: 2-fold Hydraulic cylinders - Stroke: 0–250 mm - Working pressure: 250 bar - Start-up speed: 17 mm/s  ...

Offer 26149 Technical data: - Compressive force 125 t - Projection 340 mm - Table size approx. 1000 x 680 mm - Diarrhea hole in the table approx. 300 x 200 mm - Largest installation height approx. 500 mm - Tappet area approx. 600 x 300 mm - Peg hole in the tappet 50 mm - Plunger adjustability 75 mm - Stroke adjustment 20 - 180 mm - Stroke rate 80 1/min - Light barrier - Hydraulic clutch - Pneumatic dampers - Two-handed operation - Central lubrication - Separate control cabinet with control units - Pneumatic connection 6 bar - Drive 400 V / 16.5 kW - Space requirement approx. W 1700 x H 2900 x D 2700 mm - Weight approx. 9400 kg

A single-column press is offered. Press force: 30000kg, table area X/Y: approx. 600mm/450mm, protective field height: 300mm, safety distance: 110mm, stopping distance: 18mm. SICK light barrier safety system, manual handwheel adjustment, analog pressure display, external control cabinet, foot switch preparation. Weight: approx. 3200kg, overall dimensions X/Y/Z: 1400mm/1800mm/2400mm. Inspection possible by arrangement.

A pneumatic toggle press is offered. Press force: 4500kg, stroke: 40mm, throat depth: 125mm, working height: 60mm - 320mm. Pneumatic foot switch, piece counter, maintenance unit, mechanical height adjustment, base frame, T-slot table X/Y: 200mm/160mm. Weight: approx. 185kg, overall dimensions X/Y/Z: approx. 800mm/650mm/1850mm. Inspection possible by arrangement.

A pneumatic toggle press is offered. Press force: 4500kg, stroke: 40mm, throat depth: 125mm, working height: 60mm - 320mm. Machine frame, maintenance unit, mechanical fine adjustment, T-slot table X/Y: 200mm/160mm. Weight: approx. 180kg, overall dimensions X/Y/Z: approx. 800mm/600mm/1800mm. Inspection possible by arrangement.

An eccentric press is offered. Press force: 7500kg, stroke: 1mm - 40mm, stroke rate: 60rpm - 240rpm, ram adjustment: 70mm. Precision roller feed, external control unit, digital process monitoring, sound insulation cabin, strip decoiler. Weight: approx. 1800kg, overall dimensions X/Y/Z: approx. 1400mm/1200mm/2100mm. Inspection possible by arrangement.

An eccentric press is offered. Press force: 45000kg, stroke: 8mm - 60mm, stroke rate: 80rpm - 400rpm, ram adjustment: 60mm, table area X/Y: 600mm - 700mm/450mm - 500mm, ram area X/Y: 450mm/300mm, installation height: 300mm - 350mm. Digital process monitoring, electronic cam control, servo feed control, pneumatic clutch-brake combination. Weight: approx. 4500kg, overall dimensions X/Y/Z: approx. 1800mm/1400mm/2600mm. Inspection possible by arrangement.

Key data: 300 t, 800 mm, 500 mm

HURSAN 300 tons hydraulic press Year of manufacturing 2021 Table 800x800 mm Stroke 500 mm Possible to inspect under power

Key data: 300 t, 600 mm, 400 mm

OZKOC 300 tons hydraulic press monoblock frame New in 2025, almost new Table 600x600 mm Stroke 400 mm Possible to inspect under power

Key data: 400 t, 1000 mm

LAUFFER PRESSES hydraulic press model VA 400 Capacity 400 tons Table 700x1000 mm Possible to inspect under power

Key data: 600 t, 800 mm, 650 mm

LCM Taiwan, 600 tons hydraulic press New in 12/2014 Table 800x800 mm Stroke 0-650 mm adjustable full specifications attached Possible to inspect under power

Key data: 250 t, 800 mm, 650 mm

LCM Taiwan, 250 tons hydraulic press Possible to inspect under power New in 2014 Table 800x800 mm Stroke 0-650 adjustable

2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement.

A high-speed press is offered. Press force: 38t, stroke rate: 60/300 per minute. Stroke: 6mm-50mm, ram adjustment: 40mm, infeed height: 90mm. Table surface X/Y: 550mm/440mm. Soundproof enclosure, accessories: external control cabinet, tool area lighting, vibration dampers. Total weight: approx. 2800kg, overall dimensions X/Y/Z: 1650mm/1450mm/2250mm. Inspection possible by arrangement.

A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement.

Key data: 20 t

20T Durendus C-Stand Assembly & Small Batch Press For sale is a C-column assembly and small series press from the manufacturer DURENDUS with a maximum press force of 20 T. The machine has a table size of 700 × 920 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for assembly work, small series production, press-fit work and straightening processes in industrial use. Technical data + information: C-Stand Assembly & Small Batch Press – 20 T – 700 × 920 mm General information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 5–20 T (adjustable) - Max. installation height: 550 mm - Table size: 700 × 920 mm - Crimping head: Ø 100 mm - Table height from the ground: 1,000 mm - Overall dimensions (WxDxH): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or accordin ...

pressure: 25 tthroat: 250 mmstroke: 400 mmtable surface area: 600x480 mmram surface: Ø135 mmtable height: 980 mmweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5 t, 600 mm

Length 0.64 m Width 0.84 m Height 2.20 m Weight 250 kg Color: Blue Press pads Mandrels

A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible.

An old, however overall only 12 months operated, Friedrich Petig row punching line for copper busbar production (punching) is available. Product: copper bars/busbars/busbars/Cu-bars, control system: Siemens. Documentation available. An on-site inspection is possible.