New stock promotional mini excavator KS10-8 with Kinkmatik for online auction! Minimum price = limit price!Adjustable chassis not available!Very friendly maintenance access to the engine compared to the other models.Dimensions: 2.850x0.954x2.211 mDigging depth: 1,580m without quick couplerDigging height: 2,620m without quick couplerKoop 1-cylinder engine with 7kW Articulated armStandard spoon 40cm20cm spoon80cm rigid trench clearing bucketMechanical quick couplerFilter set and tool box,Mechanical thumb gripper included!As can be seen in the pictures with 2 small paint damages!Viewing is possible by telephone arrangement, and online purchase is also possible.

Load capacity: 227kg, max. tilt angle: 3.5°, max. wind speed: 9.4m/s, platform height: 5800mm, operating pressure: 207bar, max. tire load: 570kg, weight: 1312kg. The battery is defective and the machine cannot be moved for long. Replacing the battery will probably solve the problem. Documentation available.

Hydraulic pressure: 120bar, with Two-Cylinder Diesel Motor, scoop, the tires and rims were renewed. ... more information

With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers.

Motor power: 179kW, length: 9655mm, width: 2490mm, height: 2630mm, weight: 18.7t, with documentation. ... more information

A dedusting system for asphalt mixing plants is available. Extraction volume: 90,000Nm³/h, effective exhaust gas volume: 130,000m³/h, filter area: 1105m². ... more information

Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available.

Power: 403kW, max. drilling depth: 108m, max. drilling diameter: 311mm, chassis: crawler chassis, dimensions X/Y/Z: approx. 10500mm/2500mm/3800, weight: approx. 31000kg, operating hours: 12300h. Including 36m drill pipe on the boom (without drill bit) and new 72m drill pipe as replacement. Compressor must be checked. On-site inspection is possible.

Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system End of dipper (No attachment, no buckets) Overhauled machine OPERATING MASS: 22400 KG ENGINE POWER: 124,3 Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg

Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system MORIN hydraulic attachment 3 fixed buckets (2m, 1.5m, 600mm) Overhauled machine Machine loaded on flatbedtruckApprox. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg

Description: CASE CX80C Mini Excavator PIN  , ,DCH080R6NGE6B160Approx. Onsite Dimension. (l x w x h): 6,680 x 2,320 x 2,760 mm, weight approx.: 8,690 kg ... more information

Description: RHINOCEROS XN10 Mini Excavator no.  , ,21F051077 50 hours according to counterApprox. Onsite Dimension. (l x w x h): 2,770 x 1,190 x 1,850 mm, weight approx.: 850 kg ... more information

Description: KOMATSU 290 NLC Crawler Excavator no.  , ,09900282Approx. Onsite Dimension. (l x w x h): 5,460 x 2,850 x 3,180 mm, weight approx.: 29,500 kg ... more information

Description: 13 ton HITACHI ZX130 Excavator (3281) Engine: IZUZU Power: 63kw at 1.950/min Maximum Power: 66kw at 2.150/min 20.900 hours PIN: HCMBCB00E00200905Approx. Onsite Dimension. (l x w x h): 7,610 x 2,490 x 2,890 mm, Motor manufacturer: IZUZU, weight approx.: 12,600 kg ... more information

Description: 16 ton HITACHI ZX160 Excavator (3292) Engine: IZUZU Power: 74kw at 1.950/min Maximum Power: 81kw at 2.150/min 20.379 ,hours PIN: HCMBCC00T00010613Approx. Onsite Dimension. (l x w x h): 8,640 x 2,490 x 2,880 mm, Motor manufacturer: IZUZU, weight approx.: 16,000 kg ... more information

Description: 16 ton HITACHI ZX160 Excavator (3293) Engine: IZUZU Power: 74kw at 1.950/min Maximum Power: 81kw at 2.150/min 22.175 hours PIN: HCMBCC00C00010780Approx. Onsite Dimension. (l x w x h): 8,640 x 2,490 x 2,880 mm, Motor manufacturer: IZUZU, weight approx.: 16,000 kg ... more information

Description: VOLVO EC290BNLC Excavator (3145) Engine: VOLVO D7D Gross Power: 153kw (205HP) Boom: 6.43m Arm: 3.71m 21.000 hours PIN: EC290V1317serial number: 3,145, Approx. Onsite Dimension. (l x w x h): 10,480 x 2,990 x 3,030 mm, Motor manufacturer: VOLVO D7D, weight approx.: 28,400 kg ... more information

Description: HITACHI ZX280LCN Excavator (3313) Engine: IZUZU Power: 136kw at 1.800/min Maximum Power: 140kw at 1.900/min 17.700 hours PIN: HCMBFK00C00030111  ,Approx. Onsite Dimension. (l x w x h): 10,290 x 3,000 x 3,170 mm, Motor manufacturer: IZUZU, weight approx.: 27,800 kg ... more information

Description: VOLVO EC210BLC Excavator (3078) Engine: VOLVO D6D Gross Power: 119kw (159HP) Boom: 5.91m Arm: 3.53m 20.100 hours PIN: EC210V13783 Hammer NOT Included Bucket QH Approx. Onsite Dimension. (l x w x h): 9,650 x 3,000 x 2,930 mm, Motor manufacturer: VOLVO D6D, weight approx.: 21,000 kg ... more information

Description: HITACHI ZX280LCN Excavator (3314) Engine: IZUZU Power: 136kw at 1.800/min Maximum Power: 140kw at 1.900/min 18.500 hours PIN: HCMBFK00V00030112Approx. Onsite Dimension. (l x w x h): 10,290 x 3,000 x 3,170 mm, Motor manufacturer: IZUZU, weight approx.: 27,800 kg ... more information