Manufacturer:
(Category: 302)
Extruder with screw diam. 60 mm.35 L/D, for LDPE HDPE LLDPE PP PC PS ABS EPS EPE XPS Complete with scrap silo with agitators on bottom Connecting screw to crammed feeder Crammed feeder with vertical screw extruder with 60 mm screw 35 L/D n.1 vacuum degassing pump Semi-automatic non stop hydraulic screenchanger Water ring pelletizing unit Drying centrifuge Vibro classifier electric cabinet Total installed power 86 kw Used 50 kwh Average production rate 110-150 kg/h depending on material and feeding rate The line is offered as is or reconditioned
PRT RECYCLING EXTRUDER for PE PP PC PS ABS, Extruder with 85 mm screw, 30 L/D, 60 kw d.c.Siemens drive 2.200 rpm, Average throughput rate 200 kg/h, depending on materials and feeding rate, Total heaters power 38,6 kw, N.1 vacuum degassing pump, non stop or manual screenchanger, Water ring pelletizer, Drying centrifuge, Total installed power cutting group 14 kw, vibro classifier, Electric cabinet (new), Total installed power 115 kw, used in work abt 75 kw, Total weight about 3 Tonnes, New in 1999, This extruder is ofered totally reconditioned, (photos are of a twin machine just reconditioned and sold), AVAILABILITY: 6 working weeks from confirmation
COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, spare : 2 new screws and 1 reconditioned barrel, Mounted: screws + barrel in very good conditions (380 kg/h), n.1 dosing unit with hopper, N.1 vacuum degassing pump, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, hydraulic pack, strand die (available with water ring pelletizer), stainless steel cooling bath with heat exchanging unit, air-blowing dryer, electric cabinet with air conditioning (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered reconditioned, CAPACITY: 400 kg/h
PREALPINA 105 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, 132 kw main drive, Throughput rate 400 kg/h +/- 10% depending on scraps and feeding rate, The line includes:, crammed feeder, extruder with bi-metallic barrel, stellited 105 mm screw 35 L/D, anti-wear feeding piece, N.1 vacuum degassing system 3 kw, with water cooling system, semi-automatic screen-changer 190 mm Ø, water ring pelletizing unit, drying centrifuge, heat exchanging group, closed circle., to be connected to a central chilling unit (quotable on request), vibro-classifier, electric cabinets for managing the line with touch screen panel, Users manuals, drawings, CE., Available in 15 weeks from confirmation, Available with [FULLY AUTOMATIC SCREENCHANGER](https://www.germanplast.eu/listings/4708286-fully-autom atic-screenchanger-standard-doctor-blade-system)on request., [Buffer](https://www.germanplast.eu/listings/411568 ...
AMUT BA92, Built in 2000, Twin-screw extruder with 2 Ø 92 mm screws. 22 L/D, n.2 volumetric dosing units, 59.5 kw motor, Electric cabinet and control panel, CE certification, manual and diagrams, Machine in very good conditions, Throughput with PVC profiles: approx. 250 kg/h ... more information
EXTRUSIONE LINE PREALPINA CDM, throughput rate 500-700 kg, Installed power 435 kw (about 280 kw used in work), crammed feeding unit, n.4 next-to-new Maguire gravimetrical dosing units on supporting structure, Barrel with 130 mm screw Ø 35 L/D, screw geometry for LDPE LLDPE HDPE PC PS ABS, N.1 vacuum degassing pump, FIMIC RAS 400 fully automatic screenchanger, water ring pelletizer, drying centrifuge, vibro classifier, This line has been totally reconditioned in 2020 replacing many parts with original ones (cabinet/feeding piece/screw/barrel,), Still connected and working with PE., Ready-to-go, THROUGHPUT RATE: 500-700 kg/h, MATERIALS: PE PP PC PS ABS, INSTALLED POWER: 435 KW, AVAILABILITY: immediate
The line is offered TOTALLY RECONDITIONED., PREALPINA EXTRUDER 180 mm. 2 degassing points, for LDPE HDPE PP PS PC ABS EPS EPE EPS XPS..., average throughput rate 800-1.200 kg/h depending on materials and feeding rate Including: Buffer silo with agitators and feeding auger. Forced feeding unit. Extruder with 180 mm bimetallic screw 40 L/D Double vacuum degassing system a.c.355 kw a.c.drive controlled by ABB inverter Semi-automatic non-stop screen-changer with 300 mm diam. screens., FULLY AUTOMATIC NEW SCREEN-CHANGER AVAILABLE (+200 K€ +/-) hydraulic power pack Water ring pelletizing unit. Drying centrifuge., water re-circulating tank, Heat exchanging unit on gearbox group + cutting unit. Vibro-classifier., Control panel with touch screen Electric cabinets for managing the line, Constructed in 2006. Total installed power 650 kw, average used in work 420 kw User’s manuals, drawings, CE. ...
SEMI-AUTOMATIC, NON-STOP SCREENCHANGER, Screen Ø 30 to 400 mm. Can fit any type of extruders with single or twin screws Made in sturdy steel on supporting wheeled cart for easy transport Smart construction out of our long experience in plastic extrusion Complete with control panel for temperature and pressure management Hydraulic power pack Connection flanges available on given design of pelletizer and extruder Single drawer with 2 sliding breakers (available also double/4 breakers), screen change speed can be adjusted, TYPE: Semi-automatic, non-stop
PREALPINA EXTRUDER AS NE, For PE PP ABS PS PC PS, Average throughput rate 550-800 kg/h depending on material and feeding rate, 280 kw. a.c. drive, Electric cabinet with touch screen panel, Scrap silo available on request, if needed, with extraction screw, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Semi-automatic screen changer available with FULLY AUTOMATIC SCREENCHANGER on request, Water ring pelletizer, Centrifugal dryer, On separate offer: cyclon, vibro-classifier-vertical, Immediately available
TECNOVA EXTRUSION LINE 130 mm.500 kg/h, PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw drive, Semi-automatic non stop screen-changer with screens diam.250 mm., Available with a [FIMIC RAS 400](https://www.germanplast.eu/listings/5241333-used-2007-fimic-ras-4 00-automatic-screenchanger), Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, not working from 2010, Offered reconditioned (various steps to be agreed upon), (see how we recondition on our WHAT WE DO page on top)
BINOVA TWIN SCREW EXTRUDER for PP HDPE, with crammed feeding unit, Barrel with 2 x 128 mm screws 40 LD, n.2 degassing pumps, positioned 2 mt.apart for better degassing, 250 kw a.c.drive ( + 1 x 355 kw spare drive), n.2 spare screws, semi-automatic screen-chager with 300 mm screens, water ring pelletizer, drying centrifuge, electric cabinet and operator desk, constructed in 2008, complete with Users manuals, drawings, CE compliance, offered as is, where is
PELLETIZERS WATER RING, Constructed with first quality materials and components they are reliable accessories to your extrusion line, compact and economic., made in sturdy stainless steel, With self adjusting knives to nozzle, with less wearing out and incresed efficiency, re-circulating water pump with water filtering unit for re-use, Heat exchanging unit included. You can connect it with your factory chilling unit., electric cabinet with Siemens touch screen for setting all parameters, Modem for remote assistance, Suitable for a variety of plastics and masterbatches., Size bespoke to your project : 100 to 3.000 kg/h, Materials : LDPE HDPE LLDPE PP PS PC ABS, CAPACITY: 100-3.000 KG.
GAMMA MECCANICA EXTRUDER, Material rigid HDPE + PP, LDPE, Nominal Output HDPE+PP 1.800 kg/h, LDPE+PP 1.400 kg/h, Screw diameter 250 mm 24 L/D, BDPLAST semi-automatic screenchanger (available with fully automatic screenchanger on request), Water ring Pelletizer Gamma Meccanica, Drying centrifuge Gamma Meccanica, vibrating screen, The line is offered AS IS or RECONDITIONED
PREALPINA 85 mm. 35 L/D, for HDPE LDPE LLDPE PC PP PS ABS, The line includes:, Buffer silo with agitators and feeding auger, forced feeding unit, extruder with 85 mm screw 35 L/D, vacuum degassing system, semi-automatic screen-changer, water ring pelletizing unit, drying centrifuge, vibro-classifier, electric cabinets for managing the line, nominal throughput rate 180.240 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Constructed in 1995, The line is offered RECONDITIONED, Running until October 2023, Available AS IS or RECONDITIONED (various steps meeting your budget), Available with FULLY AUTOMATIC SCREENCHANGER on request.
for PE PP PS PC ABS, Barrel with screw Ø 130 mm. 35 L/D, feeding hopper Vacuum degassing pump Non-stop hydraulic screen changer Water ring pelletizer Drying centrifuge Water tank and heat exchanging unit N.2 control cabinets Offered AS IS ... more information
materials: LDPE HDPE PP installed power 260kw double degassing changer 200 mm cutting on the head (head for pp and ldpe) vertical centrifuge capacity ldpe 300-350 kg yield pp 320 kg depending on the material spare heaters mill knives etc. Second plasticizing system after complete regeneration
Weber DS60 Twin screw extruder pipe machine Molds from 16 inches to 125 inches available Screws have been bought recently Capacity : 200 KG per hour ... more information
Bandera Extruder Tr 60 - Diam 28 Ld Year 1991 Material Pp - Pe 12 Zone Control Panel Cear Mlf 180 K engine DC Drive Motor Vecc130 Hp 40 -- 75 - 2500 Rpm ... more information