Manufacturer:
(Category: 302)
Mixing and granulating line with twin screw extruder 2CV.70.HT/41D. PP, PA6, EPDM. Screw diameter 63, length 2800. Strand granulation, storage silo, turbo mixer, 4 weighing dispensers, injection molding machine, laboratory single screw machine. Lots of different equipment. ... more information
TMS 65mm blown film extruder, complete with frame and new screw scale to be assembled, ABB motor overhauled in September, machine stopped in November, video available in operation, pulling and collecting mm.850, production around 120 kg/h. ... more information
PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible. ... more information
For LDPE MDPE and BIO Web width from 600 mm up to 1600 mm Throughput rate 100/160 kg/h depending on materials Max production speed 80 Min/max thickness 30/200 my (tolerance sigma 2 +/- 8% Extruder with screw diam. 65 mm. 30 L/D MELT control Oscillating die diam. 100-200-300 mm. gap 1,4 mm. Blow Up Ratio 1,5 – 4,5 high capacity cooling ring with inverter on electric fan 7,5 kw Calibrating basket 1.000 max diam. Gusseting units Pull off unit min/max width 600_1600 mm. Stretching rollers 1.800 mm wide Corona treatment Back to back winding station type BA 2/1.800 Max reel diam. 1000 mm. N.2 slit and seal units Supporting tower height approx 9,0 mt. Construction year 2003 Excellent conditions Mounted but disconnected
Description Corona Treatment for Cast Lines ... more information
Cincinnati Proton 75 Extruder 30D 500kg/h for Hdpe with gravimetric system 2 machines available, price is for one machine ... more information
Screw diameter 220 mm Processed material PET Flakes Drive Motor Siemens 225 kW + Simovert 6SE7 + Transmission Koellmann Unex70 Hydraulic drive dosing, hydraulic agregat Rexrorth ... more information
IBAÑEZ 175 MONOLAYER LDPE EXTRUDER HEAD It is not the complete machine, only the head. ... more information
LLDPE/LDPE/HDPE/Metallocene/other blends. Palsticizing system (extruder) screw diameter fi 45 mm. Single layer head fi 50 mm overlapping system Top extraction Activator System for mounting printer in line One-station winder Control cabinet Tower The machine produced LDPE and HDPE film from original and regranulate in thicknesses from 0.015 mm to 0.12 mm in widths from 70 mm to 450 mm + tabs. The machine is no longer in production dismantled for storage. Rewind: Single winder, fully automatic stack rewinder Maximum line speed m/min Reels diameter up to 800 mm Winding width 450 mm Accessories: Tower Calibrating basket Corona-treater Microperforator
Description Single layer blown film line Extruder diameter 105 L/D 30 Extrusion head with die 500 Dosing units DS&M Still haul off Twin winder working width 2200 ... more information
Description Single Layer Blown Film Line Material: LDPE and COMPOSTABLE Film working width: 600 / 1.600 mm. Die diametter: 100-200-300 mm. – air gap=1,4 - Blow Up Ratio (BUR) =1,5-4,5 Film thickness: 30 / 200 μ Thickness tollerance: sigma 2 ± 8% Production: 100 / 160 kg/h (with ambient temperature at 25° C) the flow rate can vary according to the thickness of the film, the width of the tube and the type of raw materials used Maximum production speed: 80 m/min Finished reels maximum diameter: 1000 mm Cardboard mandrels diameter: 3" (internal diameter) Twin winder type BA-2/1800 Line total height: 9 m
Year: 2003, low working hours, in good condition Availability: immediately. Current condition: can be viewed in operation. Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Material force feeding screw: available, Degassing system: available, Cutting head type: head cutter, air cooled. Material suitable for processing: PE/PP/PS. Humidity max 3 % Equipment: Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control box, Pressure control, Air cooling, conveying, Venturi, cyclone and pipes... Dimensions: 6,40 m length x 2,10 m width x 4,30 m height Installed power: 30 Kw.
Screw Diameter: 60 mm // Throughput: 250 kg/h ... more information
Screw Diameter: 72 mm // Throughput: 180 kg/h ... more information
pressure: 100 tchamfer lenght: 3000 mmdistance between columns: 2700 mmControl: AMADA AMNC II-PC throat: 415 mmstroke: 200 mmdayligth: 500 mmadjustment of the rear stops: 600 mmtable width: 60 mmnumber of controlled axis: 7 ajustment speed: 200 mm/secbending speed: 20 mm/sectotal power requirement: 5,3 kWweight of the machine ca.: 6,7 tdimensions of the machine ca.: mIncludes:-Matrix holder for 1V matrices, pluggable, total height with holder: 140mm-Status indicator light-5-axis backgauge with stop sensor systemFolding robot: ASTRO-100 NTIncludes:-Standard gripper-Reposition gripper on the upper press beam-Regripping support for large workpieces - pneumatically drivenTechnical data see PDF attachment.Handling robot: ASTRO-MP20Includes:-Loading table with spreading magnets-Vacuum gripper Medium and Large-Combi gripper (suction/gripping) for vertical loading-Device for vertical loading of ...
AMUT TWIN SCREW EXTRUDER FOR PIPES/PROFILES, Type BA92/22, constructed in 2004, parallel counter-rotating screws diam. 92 mm 22L/D, new screws and barrel, used for PVC window profiles, D.c. 59,5 kW drive, including 2 volumetric dosing units ... more information
MAM BLOWN FILM EXTRUDER, for LDPE HDPE MDPE and blends, Barrel with 63.5 mm. screw Ø, die diam. 200 mm., film width 1.500 mm., single winding unit 1.800 mm wide, constructed in 2004, complete with tower, machine connected in production, offered AS IS or RECONDITIONED ... more information