carton packaging machines used for sale

MARCHESINI BA400 Cartoning machine 1990 MARCHESINI BA400 packaging machine ... more information

Automatic Carton Case Sealer SIAT SM11–S Carton Case Sealer SM11 model is an automatic Fixed Format” case sealer where all adjustments needed to use the machine in a correct way are done manually and for this reason it is used for long runs with same box dimensions. The machine applies automatically two self-adhesive tape stripes on the upper and lower boxes middle line. The SM11 adjustment and use are intuitive, simple and fast. Technical Characteristics Manufacturer SIAT Packing Systems Manufacturer’s type SM11 - S Belt conveyor type SIAT CT-2 12/500 Year of manufacturing 2006 (CT2 year 1999) Output up to 840 boxes/hour Box dimensions Min-Max 200-600 x 150-500 x 100-600 mm (L x W x H) Taping units 2 x K11R for 50 mm wide tape Electricity 500W / 380V / 240V / 50 Hz Certificate CE compliance

Automatic Carton Case Erector SIAT F144/4 DX The automatic case erector F144 was built in year 2008 and it is designed to open a ready cut and folded card board blanks as a product box and after that to seal with adhesive tape the bottom flaps of box so that it is ready to be filled with products. Two carriages moved by compressed air (SMC+BOSCH) with suckers to pick cartons from box storage, square and push them in drive belts (2 motors kW 0,18 each) for the bottom flaps forming and sealing Readymade, open cases are fed to a 3 meter long motorized belt conveyor. The case erector has a variable output up to 700 boxes/hour according to box dimensions. Control panel with OMRON PLC has the following functions: box counter - box timer, low box storage alarm, brake/end tape alarm, full line alarm after the machine. F144 model is easy to operate and is built in accordance with CE safety s ...

Uhlmann C150 Horizontal Cartoning Machine Blister Packing, - Fully automatic blister packaging and simultaneous feeding of package inserts - max. output 150 FS/min - depending on product Folding carton format range: Min.: 30 x 15 x 70 mm, max: 100 x 85 x150 mm Brochure size: Min: 100 x 80 mm, Max. 210 x 300 mm - Operating voltage 400 V .- Connected load: 4 KW - GUK brochure folder 4-fold folding - PCE code reading - Luminizens control, presence control for package inserts in folding boxes - Embossing station - Brochure insertion - Venturi nozzle Mechanically overhauled Optional: - New hardware and software PLC Mitsubishi control and 8 inch color touch panel - Cognex 1D Barcode and 2D Matrix Codes Reading System for Leaflets and folding carton code -Remote maintenance - 10-year spare parts procurement warranty

- Hourly output: up to 2000 cartons - With NORDSON hot melt device - Machine in good condition  ... more information

IMA BFB K150 horizontal intermittent motion cartoning machine for blisters, etc. carton size range min. 20 x 12 x 50 mm (AxBxC), max. 85 x 60 x 190 mm, reverse tuck closure, GUK FA21/4 Cartonac 91 leaflet folder from stack, Laetus Argus 6012 bar code reader for carton and leaflet, electrics 380V/3PH/50Hz, machine floor space approx. 300 x 1300 mm (LxW), machine height approx. 1950 mm, machine net weight approx. 1500 kg, capacity up to 120 cartons per minute

100% fully functional TMD - C260 video available tour possible ... more information

Ordering system ... more information

IMA SAFE A83 E horizontal cartoning machine with intermittent movement Machine with solid steel structure, complete with: - Full fairing to protect the operator; - Base frame painted in STEEL IT 1002; - Electrical installation in accordance with EN 60204; - Voltage 400V, 50Hz, 3-Phase, + Neutral + Earth; - Control logic by PC B&R microprocessor - Color touchscreen for programming and visualization Machine status, controlled by a second B&R PC - In-line feed belt, with intermittent movement; equipped with timing belts (absolutely no chains) and with interchangeable step cups, with the possibility of with simultaneous adjustment option, length 2000 mm; - Horizontal conveyor belt for feeding boxes with pre-alarm; - System for detecting the amount of blister packs in the feeder conveyor belt; - Minimum fill level detection in the cardboard magazine; - Group for introducing t ...

- Wet gluing machine - Various label formats - Machine in good condition  ... more information

- 1 gripper head - Parts available for a wide range of bottle formats - Parts available for a wide range of carton formats - Machine in very good condition  ... more information

- Model: F 385.41 - 4 cartons of 3 x 2 bottles per operation - Boxes : many different sizes - Full carton control: With bottle counter system - With bottles of single-breasted MASPACK 110/14/RED (2006) for pressureless lining of bottles - Machine in perfect condition  ... more information

- Capacity: 2000 cartons/hour - With large cardboard magazine for great autonomy - Equipped with hot glue device - With twister at the exit to set up the boxes - Set up for many different carton formats - Machine in very good condition  ... more information

- according to layout - 1 part vintage 2006 - 1 part born in 1997 - All in very well maintained, good condition  ... more information

- Box : 3 x 4 / 3 x 5 / 4 x 6 - Boxes : many different sizes - With bottles of single-breasted MASPACK 110/14/RED for pressureless lining of bottles - Machine in perfect condition  ... more information

- Capacity: 2000 cartons/hour - With large cardboard magazine for great autonomy - Equipped with hot glue device - With twister at the exit to set up the boxes - Set up for many different carton formats - Machine in very good condition  ... more information

Availability:as of now Condition: in working order Hot melt machine: not for sale Dimensions incl. enclosure (LxWxH): approx. 700 x 500 x 225 cm Carton format: see picture 2 The system for sale sorts bags (block bottom bags) and folds a box around.  ... more information

Uhlmann C 130 horizontal cartoning machine - Fully automatic blister strip packaging and simultaneous feeding of package inserts - max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel 10-year spare parts procurement warranty Mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Cognex 1D Barcode and 2D Matrix Codes Reading System for Leaflet and Carton Code - Luminizens control, presence control for package inserts in folding boxes - Embossing station - Brochure insertion -Vacuum pump

Machine Length: 3150mm Machine Width: 1700mm Machine Height: 1200mm Machine Weight: Approx 0.5t MATERIALS All grades of Singlewall Corrugated up to 300 300 B/C Double Wall KEY BENEFITS Handles short runs economically Set up in 15 seconds 600 boxes per hour British designed and built

The type 221 fully automatic case erecting machines are designed to handle average sized cases in a wide variety of styles. The machines seal with either self-adhesive tape and are extremely simple to use. They are versatile, reliable and efficient. They also have a small footprint and offer great value for money. CASE DIMENSIONS The standard type 221 case erecting machines can handle cases between 200-500mm length, 150-400mm width and 175-600mm height. SPEED Up to 16 cases per minute Machine is ready for immediate use and available