subcategories
(3rd category level)
Manufacturer:
(Category: 409)
Radial Roll Packaging System. Max. roll width: 4,820mm, throughput: approx. 30 rolls/h. Machine dimensions: 10.5 x 7.5m. Connected load: 3x63A. The machine is in working order and can be inspected on site during operation. ... more information
Two identical big bag discharge stations with Vegawave S61 limit switch are available. Max. discharge weight: 1000kg, weight: 99kg. Limit switch: process temperature: -50°C-150°C, max. process pressure: 16bar, length: 165mm. The discharge stations are only sold as a package deal. The machines cannot be sold separately.
Max. output: 108000 cans/hour, accuracy: defect detection approx. 2x2mm-3x3mm, reliability of detection: up to 99.9%, error rate: under 0.1%, weight: 500kg, dimensions X/Y/Z: 1300mm/1400mm/1565mm. Documentation available. For more detailed data, an on-site inspection is possible. ... more information
Output for 125mm wide packing material: Winding ring speed: 250rpm, packing material width: 125mm, overlap: 35mm, net use: 90mm, output: 22.5m/min. Packaging material roll dimensions: Width: 125mm, max. roll diameter: 250mm, core diameter: 76mm, thickness: approx. 17-50my. Product dimensions: Length: 800mm to open, max. width: 300mm, max. height: 300mm. Machine dimensions X/Y/Z: approx. 1930mm/1600mm/1930mm, weight: approx. 1500kg. Including frequency converter Siemens Sinamics G110 and machine-specific conveyor technology. Documentation available.
Max. pallet weight: 1200kg, table diameter: 1500mm, load capacity: 1200kg, wrapping height: adjustable, turntable rotation speed: 12rpm, film trolley speed: 5m/min, dimensions X/Y/Z: 2500mm/1500mm/700mm. ... more information
Ring diameter: 960mm, coil width: 125mm, ring rotation speed: 30-75rpm, adjustable conveyors: 800mm-925mm. Documentation available. ... more information
Description:  , GENERAL MACHINE DESCRIPTION: A. Roller Conveyor for cell entry B. Machine for aluminium adhesive tape winding and cutting. C. Nr. 2 machines for butile adhesive tape application, tube and polietilene adhesive tape wrapping around and for aluminium tube end cutting. D. Machine for aluminum tube coining. E. Machine for internal tube diameter calibration on one or both ends. F. Pick-up for cell moving on single machines or from machines to roller conveyors. G. Conveyor for worked cells unloading.  , DIMENSIONS OF CELLS  , This sytem is projected to work cells type: COMBI BOTTOM and COMBI TOP.  , NOTE: Machine is not under power, already dismantled.Approx. Onsite Dimension. (l x w x h): 15,000 x 15,000 x 6,000 mm, weight approx.: 50,000 kg
Description:  ,DESCRIPTION OF THE EQUIPMENT  , The 'SUPER LINE NEW GENERATION' type vacuum forming equipment is suitable for the automatic processing of thermal annealing sheets up to 8mm thickness. Specifically, they are suitable for the production of inner chambers for domestic refrigerators with the use of a few operators. The tools used are designed for positive forming. The automatic operation of the machine requires the manual selector switches to be set in the correct position. The machine is fitted with the following equipment: - Electrical equipment for the control of the manual and automatic operation of the machine, SIMATIC S7-300 'Siemens' PLC and ET200B peripheral modules for the physical operation of the machine and a 'Comi' PLC for the control of the heating panels, using a computer for data input. - Hydraulic unit with 9 Tons of pressure (lower, tool table). - Pne ...
STOCK Laminating machine, Max. sheet size. 1420x1620mm, Min. sheet size: 500 x 500 mm, · with MIRUS sheet feeder, type HSII, · Suction belt carrier sheet feeder, type 4R, · Press belt, type 5, · Package turner (forks) with non-stop device, type 8, · Stacker with non-stop roller carpet, type 7, Technical specifications:, Working width: 1500 mm, Max. sheet width: 1420 mm, Max. arc length: 1640 mm, Lamination tolerances: +/- 1.5 mm, Material thickness:, - Carrier material from 0.6 - 7 mm. Single-sided corrugated cardboard only runs through the machine with a standing wave., - For cardboard of approx. 400 – 500 g/m² an additional needle bar is required., - Cover sheet of approx. 180 – 400 g/m². Deviations possible depending on material properties.
Description: Passage width approx. 1700 mm, consisting of 2 identical machines for coating offset transported workpieces, second machine same type designation, serial number 1st machine 9406, 2nd machine 9407, movable on railsApprox. Onsite Dimension. (l x w x h): 4,000 x 2,500 x 1,700 mm, weight approx.: 4,000 kg
Description: Distance between centres approx. 450 mm, max. working diameter 300 mmApprox. Onsite Dimension. (l x w x h): 1,100 x 700 x 1,500 mm, weight approx.: 150 kg ... more information
Description: with set-up position, foot operation, reelApprox. Onsite Dimension. (l x w x h): 2,000 x 2,000 x 1,600 mm, weight approx.: 450 kg ... more information
Description: Including strapping belt and mobile base frame ,Approx. Onsite Dimension. (l x w x h): 800 x 300 x 1,000 mm, weight approx.: 60 kg ... more information
Rotary Winder Goldpack Type: OP 161 K / TEL Touch Panel Rotating arm, with safety shut-off Feet for floor anchoring Photocell for detecting the pallet height in the wrapping process Foil carriage driven Soft start and outlet Fix stop Adjustable foot and head wraps Adjustable cross windings Stepless film winding adjustable Cover film range Film pre-stretching (pre-stretch variable 100-400%) Technical data for type OP 161: Pallet size max. 1200 x 1000 mm Pallet size min. 750 x 750 mm Pallet height max. 2200 mm Unlimited pallet weight PLC Siemens S 7 Winding programs can be saved Capacity 25 – 35 pallets per hour for stretch film film thickness 17 – 35 microns Pre-stretch as required 100 – 400 % Inner diameter 76 mm Outer diameter max. 280 mm Height of the film roll 500 mm Roll weight 40 kg
Description: Originally packedApprox. Onsite Dimension. (l x w x h): 550 x 550 x 350 mm, weight approx.: 15 kg ... more information
Turntable diameter 1500 mm Turntable rotation speed 4 - 10 rpm Lifting carriage speed 1.4 – 4 m/min Forklift entry bags front and back Power connection 230 Volt 1 Ph – 50/60 Hz Connected load 0.75 kW Fixstop turntable in starting position STD Turntable Soft Start and Stop STD Max. pallet dimensions (LxW): 800 x 1200 mm Maximum winding height: 2200 mm Maximum load weight 2000 kg Maximum roll diameter (film): 230 mm Height of foil spool: 500 mm Film thickness: 17-35 μm
Description: • Semi-automatic strapping machine • Serial number 3477 • Voltage 220 V • Maximum polypropylene strap width approx. 12 mm • Table dimensions 900 x 585 mm • Working height from the floor 760 mm • Adjustable strengh of the strap • Maximum support width for package approx. 720 mm • Portable with wheelsApprox. Onsite Dimension. (l x w x h): 900 x 585 x 950 mm, weight approx.: 100 kg
Description: • Semi-automatic strapping machine • Serial number 3478 • Voltage 220 V • Maximum polypropylene strap width approx. 12 mm • Table dimensions 900 x 585 mm • Working height from the floor 760 mm • Adjustable strengh of the strap • Maximum support width for package approx. 720 mm • Portable with wheelsApprox. Onsite Dimension. (l x w x h): 900 x 585 x 950 mm, weight approx.: 100 kg
Description: • Semi-automatic strapping machine • Serial number 2200 • Voltage 220 V • Maximum polypropylene strap width approx. 12 mm • Table dimensions 900 x 585 mm • Working height from the floor 760 mm • Adjustable strengh of the strap • Maximum support width for package approx. 720 mm • Portable with wheelsApprox. Onsite Dimension. (l x w x h): 900 x 585 x 950 mm, weight approx.: 100 kg
Description: • Semi-automatic strapping machine • Serial number 2314 • Voltage 220 V • Maximum polypropylene strap width approx. 12 mm • Table dimensions 900 x 585 mm • Working height from the floor 760 mm • Adjustable strengh of the strap • Maximum support width for package approx. 720 mm • Portable with wheelsApprox. Onsite Dimension. (l x w x h): 900 x 585 x 950 mm, weight approx.: 100 kg