Wheel loader mount, adapter frame, universal carrier-Wheel loader mount: adapter frame for forks, solid design-Inner mounting width: 680 to 730 mm-Mounting: shaft Ø 50 mm, dimensions see photos-Forks: can be supplied at an additional cost, large selection available-Dimensions: 1500/340/H660 mm-Own weight: 104 kg

Description: 2.9m dipper High and low flow lines 600mm offset skid 3m wide GROENEVELD automatic greasing system ENGCON S70 hydraulic attachment 3 fixed buckets (2m, 1.5m, 600mm) As is' condition Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 9,728 x 3,000 x 3,440 mm, weight approx.: 21,900 kg

Description: High and low flow lines 3m dipperstick GROENEVELD centralised lubrication S80 ENGCON hydraulic attachment 1 bucket (1600mm) Overhauled machine Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 10,080 x 3,180 x 3,675 mm, weight approx.: 36,200 kg ... more information

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket, mini excavator bucket-Excavator bucket: mini excavator bucket Stable design-Width: 245mm-Height: 400mm-Depth: 500 mm-Inner mounting width: 96 mm-Hole: bore Ø 25 mm, dimensions see photos-the holder on the spoon: can be changed by us for an additional charge-Transport dimensions: 400/245/H470 mm-Weight: 30 kg with pallet

Description: Narrow chassis 700mm offset skid 3m wide High and low flow lines 3m dipperstick GROENEVELD centralised lubrication S80 ENGCON hydraulic hitch 1 bucket (1600mm) Cummins engine Kawasaki pump Overhauled machine OPERATING MASS: 32264KG ENGINE POWER: 209kW Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 10,667 x 2,990 x 3,225 mm, weight approx.: 32,265 kg

Description: 2.9m dipper High and low flow lines 600mm offset skid 3m wide GROENEVELD automatic greasing system ENGCON S70 hydraulic attachment 3 fixed buckets (2m, 1.5m, 600mm) Overhauled machine OPERATING MAS: 27000KG ENGINE POWER: 145 Kw Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 10,290 x 3,000 x 3,255 mm, weight approx.: 27,000 kg

Description: Narrow chassis 700mm offset skid 3m wide High and low flow lines 3m dipperstick GROENEVELD centralised lubrication End of dipper (No attachment, no buckets) Overhauled machine MAX. OPERATING MASS: 27 300 KG ENGINE POWER: 140kW Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 9,880 x 2,990 x 3,340 mm, weight approx.: 25,700 kg

Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system End of beam As is (scales will be reassembled for sale) Machine loaded on flatbed truckApprox. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg ... more information

Description: Eurocode: D10C0015 woking hours/ km: 14300 serial number: 545556 location: Budaörs HungaryApprox. Onsite Dimension. (l x w x h): 2,520 x 10,000 x 3,210 mm, weight approx.: 20,000 kg ... more information

Mini excavator FF Industrial ME18 with 980 kg dead weight.Digging depth 1.65mEngine 1 cyl. Air cooled with side control as in the pictures!Viewing and test drive are possible by appointment. ... more information

Minibagger JPC HT12!as in pictures with 40cm bucket ... more information

Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket, trench cleaning bucket-Manufacturer: KFL, excavator bucket type T185-Width: 880mm-Height: 775mm-Depth: 960 mm-Inner mounting width: 280 mm-Hole: bore Ø 60 mm, dimensions see photos-the holder on the spoon: can be changed by us for an additional charge-Transport dimensions: 960/880/H830 mm-Weight: 228 kg

Description: Working hours approx.: 269h No fault codes, perfect condition. ENGINE: Stage V, Yanmar 4TNV98 engine,  ,50.7 kW, 3318 cc-  , Water-cooled, 4-stroke diesel, 4-cylinders in line High capacity fuel tank: 120 l Auto-idle and one-touch idle Idle shutdown system Cooled Exhaust Gas Recirculation (CEGR) Electronic fuel injection High pressure common rail system Auto-engine warm up Emergency stop Glow-plug pre-heat EPF (Engine Protection Feature) Dual-stage fuel filtration with water separator message in cabin Fuel final safety filter Dual element air filter Remote oil filter Green plug oil drain 24-Volt system Battery disconnect switch Fuel cooler Fuel filter restriction indicator Fuel shut-off valve TRANSMISSION Two-speed hydrostatic transmission, with variable displacement axial piston motor and automatic travel speed shifting Mechanical disc brakes in oil bath Final  ...

crane fork, loading fork, load fork, pallet fork, pallet crane fork-Manufacturer: REMA, crane fork with manual balancing-Load capacity: 500 kg-Tine length: 980 mm-manual weight compensation-Fork: adjustable, 565 to 845 mm-Usable height: approx. 1050 mm -Dimensions: 1100/1000/H1260 mm -Own weight: 74 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket-Excavator bucket: heavy design, very stable-Width: 490mm-Height: 570mm-Depth: 720 mm-Inner mounting width: 195 mm-Hole: bore Ø 50 mm, dimensions see photos-the holder on the spoon: can be changed by us for an additional charge-Transport dimensions: 720/490/H720 mm-Weight: 127 kg with pallet

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket-Excavator bucket: heavy design, very stable-Width: 410mm-Height: 630mm-Depth: 1050 mm-Hole: bore Ø 45 / 52 mm, dimensions see photos-teeth-the holder on the spoon: can be changed by us for an additional charge-Transport dimensions: 1050/410/H710 mm-Weight: 116 kg with pallet

Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple-Manufacturer: Kinshofer, clamshell grapple, type 604-350-Bucket width: 640 mm-Filling capacity: 350 liters-Opening width: 1430 mm-Total height: 1300 mm-Mounting bolt: Ø 45 mm-Dimensions: 1430/640/H970mm-Weight: 270 kg

Side tipping bucket, wheel loader bucket, earth shovel-Manufacturer: Kramer, wheel loader shovel, wheel loader shovel, heavy duty, very stable-Bucket width: 1650 mm-Inner mounting width: 865 mm-Hole: bore Ø 40 / 50 mm, dimensions see photos-Holders: for ripper teeth-Dimensions: 760/1650/H770 mm-Weight: 240kg-Own weight: 480 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket-Excavator bucket: heavy design, very stable-Width: 485mm-Height: 440mm-Depth: 610 mm-Inner mounting width: 142 mm-Hole: bore Ø 40 mm, dimensions see photos-the holder on the spoon: can be changed by us for an additional charge-Transport dimensions: 610/485/H575 mm-Weight: 64 kg

ID3284 CAT M318 DMH year/Baujahr 2019 approx. 12940 hours/hours material handler, elevating cab, 4 outriggers, solid rubber tires 10-40 % good, sorting grab (leaking but ready for use), leaking oil pan Material handler, elevating cab, 4 outriggers, solid rubber tyres 10-40% good, sorting grapple (leaking, but ready for use), oil pan leaking