other wood working machines used for sale

Pellet mill / press CPM 7900 aftre renovation Dia inch : 30 - 762 mm Die width : 8 - 210 mm Die surface 5025 cm² KW : 250 KW Machine type : 7900 Buildyear : 1984 Width rollers : 215 mm Dia rollers : 350 mm 1 set rollers Oil cooling Twin mixer 2 x 15 KW / Die Hosting system New inlet in stainless steel

Disc chipper, inlet width = 340x380 mm disc chipper, infeed dimensions = 340x380 mm  ... more information

Manufacturer: Höcker Polytechnik, Type: S 200, Year: 1985, Volumenstrom m3/h: 2850, Fan kW: 3 kW, Year :1985 ... more information

Name: Sprout punch Manufacturer: Schleicher, 8192 Gerelsried/Obb. Machine number: 8922 Year of construction: 1985 Condition: used, completely revised and tested - pneumatically operated rung punch - working height (cutting height): approx. 150 mm - working width (cutting width): approx. 120 mm - Width (incl. table extensions): 1520 mm - Depth: 600 mm - Height: 1120 mm - Two-hand operation - with angle stop - with length display (ruler) - with adjustable supports for processing palatine strips - Compressed air connection: 5 bar - dust-free working - Table extension left + right (removable) - Stops left + right removable - adjustable for single miter 90° and double miter 45° - 1 x sliding stop Transport dimensions (W x D x H): 1520 x 700 x 1370 mm on pallet Weight: 95 kg (incl. pallet) (Changes and errors regarding technical data and prices excepted!) I ...

For sale renewd shredder made by HOMBACK with 250kw. Used for shredding wood in long till chipwood.  ... more information

centrifugal fan, dust extraction fan, fan, suction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow: 3200 m³/h -Inlet connection: Ø 400 mm -Connection output: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg ... more information

Description: usable length: 4000 mm maximumum width 1300 mm installed power 0,55kW height adjustable Important: ,article is placed at the 2nd floor of the building - a crane handling is necessary to get them downserial number: 61040/12, length: 4,000 mm, width: 1,300 mm, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,600 x 1,000 mm, weight approx.: 400 kg

Manufacturer: Nestro, Type: N-300-B ex, Year: 1986, Diameter intake mm: 300, Engine power kW: 2,0, Flow rate approx. m3/h: 4300, rotations rpm: 1405, Direkt drive: yes, Ex-protected: yes, Year :1986 ... more information

Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Centrifugal fan, chip extraction fan, fan, suction, chip fan -unfortunately no funding data available -Motor: MEZ type 4AP80-2 -Motor power: 1.1 kW -Speed: 2840 rpm -Connection input: Ø 60 mm -Outlet connection: Ø 400 mm -Base: on castors -Dimensions: 940/540/H1510 mm -Weight: 74kg

Frame press Hess Technical description: - 2 pneumatic pressure cylinders in length - 2 pneumatic pressure cylinders in width - 2 pneumatic workpiece holders - Feed bandwidth: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping area: 680 x 1,400 mm - Control panel Dimensions: - Length: approx. 3,400 mm - Width: approx. 1,700 mm - Height: approx. 1,400 mm - Weight: approx. 800 kg

Turning device, edge processing, turning station, turning table, turning station, turntable, transport system, roller conveyor -for edge banding machine, edge banding machine, edge banding machine -Turning station: for turning workpieces -Roller conveyor: Narrow -Roll width: 1300 mm -Roller conveyor length: 2900 mm -with: adjustable baffle -Roller conveyor: wide -Roll width: 3400 mm -Roller conveyor length: 1400 mm -Turning head roller: rubberized -Transport dimensions: 3000/1500/H960 mm 3500/1550/H1850 mm -Weight: 1000 kg

Turning station, turning table, turning station, turntable, transport system, roller conveyor -for: edge banding machine, edge banding machine, edge banding machine -Turning station: for turning workpieces -Roller conveyor: wide -Roll width: 2900 mm -Roller conveyor length: 1500 mm -Turning head roller: rubberized -other roller conveyors available for an extra charge -Transport dimensions: 1500/3850/H1950 mm -Weight: 969 kg

Valonkone Debarking Machine VK450 Year of construction: 1987 ( current photos coming soon - only sample photo ! ) Debarking diameter (mm) 80 - 480 Min. trunk length (m) 2,2 Weight (kg) 13.500 Motor: Rotor (kW) 55 Engine: Feed unit (kW) 3x11 Refurbished / workshop tested Valonkone debarking machine: The renovation process essentially includes: - Mending the sheets, replacing recesses - Check rotor bearings, check knife axes and partially repair them. - Order bearings and wear parts (cardan shafts). - Repairing tables and attaching new plates to the edge strips, in some cases new conveyor chains. - New straps - Check and repair geared motors. - New control cabinet - Partial sandblasting or rust removal and re-priming The VK450 debarker was the first of the "new generation" of VK debarkers, followed by the VK600 and VK800 models. It quickly became the most sought- ...

Complete sorting plant of Renholmen and RemaSawco The plant can be visited in operation and function until summer 2022. Refurbished in 1996 Power: 400/220 Volt Equipment: 1) Chain conveyor for sideboards and center delivery (buffer zone) 2) Equalization in front of the curve conveyor 3) Accumulation conveyor with curved conveyor 4) Decrypts 2 pcs. To arrange random wood sizes 5) Roller box and buffer table before handling piece by piece 6) Piece-by-piece feeder where the sorter pulls out what needs to be cut off at the top end 7) Sorting station and piecemeal feeding. For manual quality sorting and determination of residual pieces 8) Top-end trim station for manual decision on top trim 9) Conveyor for transport into the sorting hook chains. 10) Hook conveyor chain with steel hook for 40 containers. 11) 40 sliders for pushing down into the right container 12) 40 pieces of  ...

Log splitter RAU Type AHS 200 Base frame without hydraulics, cylinder available. To rebuild  ... more information

Copy lathe Brand: Röhrsdorfer model: 83 199 Year of construction: 1987 Workpiece length 100 - 460 mm Kantel dimensions: 20 x 60 mm Equipment: Workpiece magazine Turning knives Template-controlled rotary blade knife, 3x  ... more information

Komplette Hackanlage LINDNER 150/400 37kW mit Vibrorinne ca. 17 m, Siebzone ca. 5m, Bogenfoerderer ca. 6 m Hoehe, Laengskratzer in 3 Bunker ca.12m, Trommelsieb; ready for work  ... more information

Centrifugal fan, dust extractor fan, fan, extractor, dust fan-Motor power: 15 kW-Speed: 2930 rpm-Total pressure: 400 da Pa-Volume flow: 5000 m³/h-Connection input: Ø 400 mm-Connection output: 380 x 320 mm-Dimensions: 920/760/H775 mm-Weight: 216 kg ... more information

Manufacturer: Brandt, Type: KS 23, Year: 1988, Min-max edge material mm: 0,5-12, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 12, Premilling: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Edge sanding: yes, Year :1988

With documentation, the machine was functional until the end, a few parts would have to be replaced, an inspection is possible. ... more information