other wood working machines used for sale

Manufacturer: Hebrock, Type: TF 03, Year: 1998, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Kopierfunktion single sided: yes, Tracing by roller: yes, Arbeitstakt automatisch: yes, Engine milling kW: 0.5, Machine lenght mm: 1000, Compressed air bar: 6, Wight approx. kg: 200, mit Schwabbelstation, Year :1998

Technical data: Length: 1.0 m Stanganzahl: 4 St Drive: 4,0 KW  ... more information

A complete sizing line is available, max. workpiece dimensions: 2500x500x30mm, includes alignment station SAG RULLIERA INTR. SEZION, longitudinal milling Gabbiani TKM.72 S, number of units: 4, power: 5.5/5.5/7.5/4kW, belt conveyor SAG, cross processing Gabbiani TKM. 72 S, power: 4/4/5.5/5.5kW, turner SAG, cross conveyor SAG TRANSFER CINGHIE RIBALTATORE, collecting station (hopper) SAG RULLIERA CON TRAMOGGIA, film machine BVM SM 6015 L, shrink tunnel BVM SC 6030 D, palletizer Sacot SCA 01 SPEC, the machine was used for profiling floorboards.

Centrifugal fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan-Manufacturer: Eurovent, dust extraction fan centrifugal fan type MPR 351-Motor: AEG 5.5 kW 2860 rpm-Volume flow: 3000 m³/h-Connection: input Ø 305 mm-Connection: output 220 x 160 mm-Base plate: 415 x 400 mm-Dimensions: 755/750/H770 mm-Weight: 100 kg

Description: Volume flow: 1200m³/h Connected load: 400 V Frequency: 50 Hz Motor power: 1.5 kW Control voltage: 24 V Approx. Onsite Dimension. (l x w x h): 970 x 660 x 1,195 mm, weight approx.: 200 kg ... more information

Holtrop Jansma Extraction with Kontainer Chip Disposal Type: MSK350S Year of construction: 1998 Type: overpressure filter system Intake manifolds: ø350 mm Capacity: 8,000 m3/hour Year of construction: 1998 Filter surface: 46 m2 Fan: ETD 350, 7.5 KW/1.500 tpm Star wheel chip disposal: 800 mm - Pressureless Chip disposal fan: EMD-200, 4 KW-300tpm, 45m3/uur Explosion Pressure Release: Doors serve as a pressure release in the event of an explosion Pressure Measurement: Pressure Dial Gauge Cleaning: 0.13 KW/1500 KW vibrating motor Air recovery: 500500 mm with built-in flame protection damper Dimensions: 3,3503,0001,200 mm Scope of delivery: filter system with intake fan Fan, transport fan, control cabinet, air recovery with built-in flame protection flap

Manufacturer: unknown, Year of construction: 1998, Filter system Overpressure: yes, Volume flow m³/h: approx.5000, Hose diameter mm!: 220, Number of filter chambers: 1, Fans Pcs.: 1, 2. Suction fan kW: approx.4.5 Kw, Construction mass Length 2400 X Width 1800 mm Height 3900 mm/ Valve gate installed in soundproofed box, Year of construction :1998

SECOND-HAND HYDRAULIC CLAMP WITH FOLDING BENCHES CAMAM MOD. SI 3L GI - CE RULES - tilting guides - s/n 237 - volt. 380/50 - year 1998  ... more information

Round timber Sorting conveyors make JUMPER. 43 sort fields right and left 3-5 m length of wood. Drive unit with 2 x 75 kW. From Boxer electrically with each 3.0 kW. 2 x kW frequency converter FIG. 90 each. Steel base with 2,600 mm. sorting chain conveyor height 1 year old! Plant until April 2017 in use to visit! Built in 1997.

Current: 63A, nominal voltage: 400V. ... more information

Control cabinet with control panel for Lompas DN 250 pallet nailing machine; Control original GE FANUC Series 90-30 controller; keypad for machine operators; Ready for use until dismantling, dismantling, ready for loading Freight forwarding  ... more information

Description: Shears for irons: 300 x 15 mm flats: 200 x 20 mm Punching: Ø 40 x 10 mm AND Ø 20 x 20 mm. Shears for l profiles at 90 º : 120 x 120 x 10 mm Shear for bars: Ø 40 mm Y □ 40 mm Rectangular shear: 90 x 42 x 10 mm Versatile, economical punching shear with 2 independent hydraulic cylinders, 2 stations and 5 workstations: - Punching (550 kn power) - Notching - Shears for l sections (1100 kn power) - Shear for flat bars - Shear for round Ø and □ square bars - Machines operated by two cylinders. - 5 workstations equipped with tools for cutting l , ø and □ bars, rectangular notching and punching. - Quick punch change. - Flat-iron cutting table with adjustable guides. - 2 simultaneous work stations - Superior speed developed by a powerful hydraulic unit. - Special approximation equipment with reduced pressure and slow speed. - Large punching table with millimetre stops. - L ...

Technical data: Roll width: 1200 mm Length: 27 m Roll diameter: 168 mm Roller spacing: 800 mm Cut-outs: 5 PCs. Switching flag: 1 PCs. Power: 4,0 KW With built-in honing cross conveyor: Distance: 2.99 m Line number: 5 line Drive 2,2 KW  ... more information

SECOND-HAND SANDING MACHINE LASM VOLPATO MOD. LVO 120 - CE RULES - volt. 380/540 - sn 998478 - year 1998  ... more information

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...

Manufacturer: Brandt, Type: KD 99, Year: 1998, Control: Homatic, Min-max edge material mm: 0,4 - 3,0, Work piece width min-max mm: 62, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 60, Edgeband height max mm: 62, Premilling: yes, Bevel milling: yes, Corner tracing type: yes, 4 Motoren: yes, Nuten : yes, Radius scraper: yes, 4 Motoren: yes, Compressed air bar: 6, Machine lenght mm: 8740, Noise enclosure: yes, Rückführung Typ: yes, machine ready for demonstration: yes, Year :1998

Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998

SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Spindle configuration: bottom 3kw right 3kw left 3kw top 4kw universal 3kw - working width mm 230 - planing height mm 120 - volt. 380/50 - s/n 25 906/00 - year 1998  ... more information

SECOND-HAND 5 SPINDLES MOULDER WEINIG PROFIMAT 23 E - CE RULES working width 260 mm working height 160 mm. composition : - horizontal bottom 5.5Kw - vertical right (7.5Kw Rh + Lh) - vertical left - horizontal top 7.5Kw - horizontal bottom 11Kw year 1998 (CE) V 380/50  ... more information

SECOND-HAND TOP BOTTOM WIDE BELT SANDER SAC SUERI MOD. 4R300 - Working width 300 mm - Max thickness 150 mm - Min. thickness 5mm - Min. pieces length 240 mm - 2 Top Belts: Roller + Roller - Diam. 240 mm - 2 bottom belts: roller + roller - diam. 240 mm - Feeding speed 4-16 m/min - N. 4 motors 4 Kw each - CE rules (year 1998)