shrinking machines used for sale

Beck Series Packer S 1450 X with Gripper Feeder Longitudinal and transverse welding and working height adjustment variable Working width 140 mm to 500 mm Length, variable, endless Height up to 100 mm Flat film PE feed via one roll each for the bottom and for the top Edge strip rewinding device Packing capacity up to 60 packs per minute

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum film ...

Width 45 cm Year of construction 2006 Hood shrink Angle welding machine Shrink tunnel mobile substructure Insert height up to 20 cm Price on request. We deliver and install worldwide!  ... more information

Operational hours: ca. 2200h, including gripper feeder and Shrinking Tunnel PACKTECH Minipack. ... more information

Complete Packaging in film, with continuous side sealing & operation consisting in: 1) Automatic product transport into the wrapping process by finger chain conveyor L=10 m, in double row function 2) Two-sided product alignment unit 3) Driven conveyor belt triangle arranged 4) Max. production 10.000 c/h 5) RES controller for use of CPP film 6) Hole punch device 7) Print register control 8) Equipment for tight packaging 9) Remote control 10) Corner impress station in double function 11) Film folding device FF 1000-IN 12) Sealing equipment for header and euro-hole 13) Modem (connection with Hugo-Beck) 14) Rejecting device PA 15 15) Unit for formation of single bag with header with reinforcement strip 16) Unit for formation double bag 17) Tunnel SLB5035/25

MULTIVAC T-350 for gas packaging Pneumatic system with working pressure: max. 7-10 bar. 4kW. A minimum of 10, a maximum of 30 products can be packed. It is equipped with an intelligent micro-operated control unit that stores various settings for 220V/3PH/60hz operation. ... more information

Maszyna do automatycznego pakowania w folie POF, PVC Italdibipack MECPACK STA - rok produkcji : 2006 - max wymiary pakowanego produktu : 500 mm x 400 mm - max wysokość pakowanego produktu : 150 mm - wydajność : 20 zgrzewów na minutę - regulowane temperatury noża wzdłużnego i noża poprzecznego - regulowany czas zgrzewu - fotokomórki pozioma i pionowa - kissing conveyors - dodatkowa funkcja dociągania taśm dla małych przedmiotów - regulacja wysokości zgrzewu gór dół - moc : 2.2 kW - wymiary maszyny : 1700 mm x 800 mm x 1440 mm - waga maszyny : 420 kg - maszyna na 4 kółkach - zapotrzebowanie na powietrze 6Nl przy 6barach - zasilanie 380V Maszyna w pełni sprawna, zadbana, serwisowana, do zobaczenia w produkcji. Tunel BECK w cenie lub prawie nowy tunel + 5000 EURO - silnik górny po remoncie - stan dobry - maszyna na 4 kółkach + wykręcane podp ...

Graham Radiant Heat Shrink Sleeve Tunnel Tunnel Type: Radiant Electrical: 400 VAC, 3 Phase, 26 Amps Weight: 150kg Conveyor Height min/max: 900 mm/1000 mm Container Height min/max: 50 mm/300 mm Container Diameter min/max: 20 mm/150 mm -Individually controlled radiant heating elements -Polished interior surfaces to maximize heat/radiation reflection -Modular design -Double skin insulated stainless steel construction -Can preheat containers or shrink material after application -Designed to be used over an existing conveyor -Fully controlled internal environment to reduce running costs

Electric shrink tunnel 12 Electric thermal tube Electrical: 3 Phase, 24 kWt Weight: 420kg - 3-step heat isolation design for energy saving and operator protection. - Digital control, internal circulation keeps temperature consistent and shrinking effect perfect. - Equipped with high-level VFD(Variable Frequency Drive) that makes controlling of wind speed easy. - Unique wind board design makes controlling of wind direction easy and flexible, able to adapt to different bottles. - Durable electric heater tube ensures efficient heating. - Panel is embedded to prevent operators changing setting accidentally. - Heating can be stopped immediately, or maintained by time

Power: 30 cycles / min. Set up to handle the following formats: 6 x 0.5l shrink pack (3 six-packs on tray) 6 x 1,0l shrink pack (2 six-packs on tray) 6 x 1,5l shrink pack  ... more information

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Angle welder for welding in different containers  ... more information

Used machine for the application and sealing of shrink sleeve labels. Manufacturer PDC Europe SAS. New 2007. The machine consists of: 1. shrink sleeve label applicator PDC100BEM , 2.5 kW. The sleeve applicator is an automatic unit designed to apply neutral or printed PVC and/or PET sleeves. The process of making and setting the sleevs takes place in five working zones: The spool is supported and unwound up to the opening tetrahedron, The roll of sleev is opened and then directed to the cutting zone where it is cut to length. The sleeve is moved from the cutting zone to the ejector by means of a feeder. The product to be labelled is fed underneath the ejector, positioned underneath it precisely and moved on. The Sleeve is placed on the product using the ejector. Estimated weight of applicator: approx. 300 kg. 2. heating tunnel TAR1500-III for heat-shrinkable labels. Output 19 ...

little used, working well. Manufacturer MSK. Country - Germany. Year of manufacture 2007. pallet dimensions (length x width) without products: EURO pallet 120 mm x 80 cm palletized load dimensions (length x width) after loading the product: 120cm x 80 cm x 1800 cm maximum weight of palletized load: 2 tone capacity (pallets / hour): 30 pallets

Package Wrapper SMIPACK BP700 Manual Wrapper This SMIPACK BP700 Sleeve wrapping machine is ideal for packaging glass or PET bottles with plastic shrink film. Sleeve wrappers or package wrappers, as the name suggests, group items together with the most common item package this way would be a 6-pack of beer leaving the sides open. With 550mm wide sealing bar. Needs a Shink Tunnel at the end to shrink the film. Characteristics: Maximum productivity: 5-10 packages per minute Welding bar: 700mm Desk height: 800-900mm Machine weight: 300kg

Shrink wrapping oven (180º-210º) Inlet/outlet dimensions: 550 x h460mm Cooling fans at the outlet Installed power: 65Kw average consumption: 50Kw 380V III Overall dimensions: 5050 x 1400 x h2250mm DOCUMENTATION AVAILABLE ... more information

TETRA SHRINK TS51 LONG OVEN V180 MANUF. IN 2007 SERIAL NR. 75670/00305 CAPACITY 1200 TRAYS/HOUR EXCELLENT CONDITION  ... more information

Manufacturer: Multivac Type: B500 YOM: 2007 Speed: 2,5 cycles/min microprocessor control Collection of trimmings Conveyor width: 750 mm Power: 7,2 kW Working principle: continuous high speed vacuum packaging machine Products: Cheese, Meat and variety of bulky products  ... more information

Multivac vacuum chamber packaging machine (inline) Manufacturer: Multivac Type: B500 Year of construction: 2007 Speed: 2.5 cycles/min Microprocessor control Collection of sections Conveyor belt width: 750 mm Power: 7.2 kW Working principle: continuous (inline) high-speed vacuum packaging machine Products: cheese, meat and other bulky products

Double chamber Henkovac A-5000 Mounted cutoff on-off Replace main power switch Renovated welding beam The machine runs with an external vacuum pump or central vacuum (pump not included, can be purchased separately) Welding beam: 80x70cm The conveyor belt is included ... more information