1 Gebr. Twin, column and truss formwork Formwork length: 25,000 mm max. concrete part basic height: 1,100 mm max. extension height: 2,000 mm min. concrete part width: 200 mm max. concrete part width, one-sided: 800 mm max. concrete section width, opposite: 600 mm  ... more information

1 Gebr. hydraulic tilting table - Dimensions: 16.30 x 3.50 m - Single-sided upstand: 30 cm - height of the table. 85 cm - Steel flooring - the table needs to be reground - without vibrator, but with holding brachets with 3 hydraulic rams  ... more information

2 Gebr. Variotop stair formwork for the upside down production of straight prefabricated stairs - Stair formwork type 18/150, consisting of base grate with tilting trestles and shoring - Mechanically centrally adjustable step body with swivelling steps -Integrated hydraulic control unit for the tipping process - Height-adjustable longitudinal parking on one side - Hydraulic control unit for the tipping process - Stairs are concreted overhead - max. 18 steps - Max. nominal width of the steps is 1.50 m - Tread range 250- 310 mm

2 Gebr. Hydraulic Tilting Tables Dimensions table 1 : 14.50 x 4.50 m Dimensions table 2 : 14.00 x 4.20 m with holding bras for vibrators with 2 hydraulic rams.  ... more information

Used Floor Paver Manufacturer: Zenith Type: 913 Year of construction: 1978 Used traveller for concrete blocks, pavers Manufacturer: Zenith Type: 913 Year: 1978  ... more information

KVM 62/80 Pavingstone machine, 2005. Hydraulic Powerpack, KVM PLC Control, Pallet size 900 x 750, Moulds. Machine was shut down in 2010 due to a merger between 2 companies. The machine has only been in operation for 5 years and is in very good condition. PRICE INCLUDES DISMANTLING. Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017

KVM 125/105 Block/Paving Plant complete 1999 NEW PRICE! KVM PLC control, Curing Rack System. Finger car systems. Elevator system 10 levels, Coloring system. 2 Moulds, Palletizer system, Skako 1125 L batching plant complete. Plant is in good condition and was shut down in 2020. The plant can be seen after appointment. We can assist with dismantling, packing and shipping. Amexpo Consult, Merkurvej 31, 9370 Hals Denmark. +45 29251017

Fully automatic production line for concrete pipes DN300 up to DN1200 based on RADIAL PRESS or PACKERHEAD Technology. BFS-Souveraen Type: 1230 Condition: Very good The SOUVERAEN is the BFS pipe machine for high-performance production with first-class product quality. The counter-rotating pressing tool takes over the concrete compaction and is controlled by a sophisticated control system. The feeding of the concrete will be torque controlled, instead of concrete weight in standard systems. So the compaction quality is always secured. Production of concrete pipes according to all international standards. Year of construction: 2003, but has few hours, since it has worked very little since 2018 Location: Italy Condition: is in very good shape and well maintained. The machine is based on the packerhead technology (radial press) from BFS. The automatic handling is an open flo ...

Pallets Carousel for Double Wall (Twin Wall) and Filigree Floor Production, MFA M24514 Manufacturer: Vollert, Nuspl, Weckenmann, EBAWE, Filzmoser, RATEC, Unitechnik, SAA Year of construction: 2020, 2019, 2017, 2003, 1991 Control system : Siemens S7, Unitechnik Products: Twin Walls (max. height 3.0m), Filigree Floor Slabs PALLET CIRCULATION Pallets: 10.60m x 3.08m, 48 pieces STRIPPING AND LIFTING Hydraulic tilting station (EBAWE company, renewed in 2017) Lifting device for shell 1 + floor element (Weckenmann) CLEANING, PLOTTING, ROBOT-SHUTTERING AND OILING Automatic pallet cleaner, plotter, shuttering robot (Weckenmann, renewed in 2020 and 2003) STEEL REINFORCEMENT, ROBOT, WIRES, FILIGREE GIRDERS Automatic longitudinal and cross wire machine, diameter 6-14 mm, lattice girder preparation, Automatic insertion robot for laying all bars, as well as the lattice girders  ...

For Sale is a ACOTEC Production Line Manufacturer: ELEMATIC Output: 160 m2/h (double line) Year: 2019 This offer comprises 2 ELEMATIC production lines with a combined capacity of 160m2/h and also includes a FRUMECAR batching plant. Acotec panels are precast, non-load bearing partition walls. They are room-high and 600-mm wide, with a tongue and groove design along the vertical edge. The panels are 6 times faster to install than traditional brickwork and twice as fast as blockwork. Modules list of the production plant -Concrete Supply -Plate Handler -Plate Feeding Conveyor -Casting Module -Product Module 6/100 -Saw -Conveyor for Saw -Trimmer -Product Conveyor -Recycling -Stacker -Stack Conveyor -Stack Return Conveyor -Crossing Station -Restacker -Product Tilting Receiver Conveyor -Product Tilting Device -B-Quality Conveyor -Pallet Conveyor -Cleaning ...

On offer is a used rumble system with sorting and translator for chamfering concrete and natural stones The plant is fully functional and can still be visited during operation.  ... more information

ID2149 Pedershaab Multiflex – Plant for the production of concrete pipes Plant for the production of concrete pipes, little used, with concrete feeder, with 10 jackets for 1m pipes, with 4 cores (300, 400, 500, 600 mm diameter) for 1m pipes, with approx. 90 base sleeves, output approx. 60-70 pipes per 8 hours, ready for use Plant for the production of concrete pipes, little used, with concrete feeder, with 10 pieces of jackets for 1m pipes, with 4 cores (300, 400, 500, 600 mm diameter) for 1 m pipes, with approx. 90 pieces of lower sleeves, capacity approx. 60-70 pipes per 8 hours, ready for use

One semi new ELECTROWELDING MESHLINE from PRECUT BAR, from Ø 4 mm up to Ø 16 mm diameter. Mainly exesting of: Line Wire Deposit Table SEmi automatic line wire feeder Welding machine with 2.500mm width Cross wire magazine Linear pulling out device Stacking unit for meshes up to 6.000mm of length

Gebr. Stair formwork / delta formwork ramp, make HOWAL, for straight stairs - mechanically adjustable, stairs can be made in installation position up to approx. 2.26 m wide and 18 gradients, max. platform length: 2.00 m  ... more information

Gebr. Sectional formwork Fabr. Technoplan, L = 26.50 m, max. chamber dimension = 1.65 m x 1.80 m Steel formwork, incl. vibrating system (vibrator, converter) Formwork can be moved hydraulically  ... more information

Gebr. Mixing plant / tower plant Fabr. Krupp, control company Dorner, 1 x mixer THZ 3000 Teka, 1 x mixer THZ 1000 Teka, with 4 cement silos, hot water supply via biomass heating possible, aggregate storage in the tower, Feeding via elevator/vibrating chute and distribution belts, recycling plant with two separate agitator basins

Gebr. Ground paver Fabr. Zenith 913, incl. 4 moulds for: Hollow block 49/17.5/17.5 cm, Hollow block 30/24/17.5 cm Hollow block stone 36/24/17.5 cm, hollow block stone 36/24/23.8 cm The machine runs on triangular rails, max. mold width is 131.5 cm, production area thus approx. 120 cm Production depth max. approx. 100 cm

ID2950 Supra Schaltische/scarf tables 67 Avermann tables Wachenroth (Supra) 2.40 m formwork width 2.70 m total width 10.50m length 5 cm upstand 60 cm total height 24 cm smallest distance when stacking (max. occupancy approx. 15 tons) 67 Avermann Tables Wachenroth (Supra) 2.40 m formwork width 2.70 m overall width 10.50 m length 5 cm backsplash 60 cm total height 24 cm smallest distance when stacking (max. occupancy approx. 15 tons.)

ID2953 Henke Variant year of construction 1992/93 Brick Manufacturing Plant with core and attachment, for the production of paving stones, slabs, kerbstones, U and L stones, hollow blocks Board size 1,350 x 1,150mm (approx. 1935 piece) Min. product height 40 mm Max. product height 500 mm Drawing plate function and cross-punch cleaning Vibration HENKE Vibra-Matik with 4 servomotors SEW Renewal of the machine control in 2011 to Siemens S7-400 incl. Board destacking device wet side incl. Conveyor line wet side (V-belt and intermediate chain transport) incl. Conveyor section on the dry side (latch track and lowering ladder outlet) incl. Board turning cross dry side incl. Board stacking device dry side incl. Board package lift truck with transverse traversing platform (board storage) incl. Packaging HENKE incl. drying chamber The machine is in good working condition and can ...

ID2953 Henke Variant year of construction 1992/93 Brick Manufacturing Plant with core and attachment, for the production of paving stones, slabs, kerbstones, U and L stones, hollow blocks Board size 1,350 x 1,150mm (approx. 1935 piece) Min. product height 40 mm Max. product height 500 mm Drawing plate function and cross-punch cleaning Vibration HENKE Vibra-Matik with 4 servomotors SEW Renewal of the machine control in 2011 to Siemens S7-400 incl. Board destacking device wet side incl. Conveyor line wet side (V-belt and intermediate chain transport) incl. Conveyor section on the dry side (latch track and lowering ladder outlet) incl. Board turning cross dry side incl. Board stacking device dry side incl. Board package lift truck with transverse traversing platform (board storage) incl. Packaging HENKE incl. drying chamber The machine is in good working condition and can ...