We offer 178 pieces Meva Mammut Schalschlösser a. 14,00€/ piece + VAT. The locks are in a Doka reusable container 120 x 80. The locks are controlled and sorted and fully operational. If you have any questions about 0176, Mr. Becker 70044689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim Register court Ulm: HRA722943 VAT ID NO: DE279047055

We offer a position new formwork supports galvanized, with external thread 1,95-3,50m according to DIN Euro standard 1065 manufactured with flat head Class B/D tested 144 pieces a 47,90EUR + 3 x stack pallets 1.43 x 0.87 x 0.69m new a 150.00EUR total 7347,60EUR net Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim, Germany Register court Ulm: HRA722943 VAT-ID-NR: DE279047055

We offer for Peri Maximo MX 15 270 x 240 frame formwork: Maximo MX 15 / 270 7 x Element MX 270 x 240, newly occupied, 40% discount a 1599,00€ 18 x Element MX 270 x 240, used, 50% discount a 1332,50€ 2 x Element X 270 x 120, newly occupied, 40% discount a 924,00€ 3 x Element MX 270 x 120, used, 50% discount a 770,00€ 9 x Element MX 30 x 240, newly occupied, 40% discount a 3901,30€ - Frame + formwork skin top condition - Newly occupied or good used formwork skin - Frame primed and varnished with zinc phosphate paint. - SB2/3 easily possible They offer on 1 element MX 270 x 240, newly occupied, 40% discount a 1599,00€ Subject to sale All prices excl. VAT + transport For questions 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Compa ...

42 x SFS smart prop plus 20-350 new â 36,20EUR/St â?¬1520,40 = NET 1 x Doka stacking rack new 130,00EUR Unlimited quantities / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and resiliency issues like at 0049 176 70044689 Mr. Becker

42 x SFS smart prop plus 20-300 new a 31,90EUR/St. â?¬1339,80 = 1 x Doka stack frame new 130,00 EUR 42 x SFS smart prop plus 20-350 of new 36,20EUR/St 1 x Doka stacking rack new 130,00EUR Number of ungebgrenzt / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and failover

Universal formwork Paschal Raster Universal formwork for foundations, walls, columns, beams, shafts, curves (polygons), landscaping construction, prefabricated elements. Versatile and flexible for use as manual and large-area formwork. Thanks to the modular principle, systemic formwork is very possible, even with complicated floor plans. The flat steel frames guarantee the robustness and durability of the formwork. Compatible with all PASCHAL systems. Connecting bolts as a universal fastener for all elements and accessories.

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commi ...

Doka Alu Framax 127 m2 Good condition of frame and formwork skin (partly new Finply formwork skin or used X-Life formwork skin) Due to its lower weight, the aluminium frame formwork is suitable for shelling with and without a crane. Also seamless in combination with Framax steel formwork suitable. Lightweight and versatile due to sturdy profile frame made of aluminium Reduced workload when shelling by hand due to low element weight, with a high load capacity of 60 kN/m² can be implemented by hand or by crane thanks to frames made of torsion-resistant aluminium hollow sections Division into crane and hand formwork areas 20 x Element 0,90x2,70m 20 x Element 0,75x2,70m 14 x Element 0,60x2,70m 6 x Element 0,45x2,70m 6 x Element 0,30x2,70m 2 x Outer corner 2,70m 2 x Inner corner 2,70m Partial quantities are also possible! Doka Alu Framax 127 m2 Good con ...

-reliably high load capacity across the entire beam length thanks to homogeneous web material -secured component load capacity, as all of the straps are machine stress graded and load-tested -consistent product characteristics owing to high dimensional stability -multiple savings compared to squared timber due to improved load capacity combined with lower weight -Certification EN 13377 -Produced in Austria from Doka Industrie The length of the H20 smart beam varies from 2,45m until 5,90m. Costs: 5,00 EUR/rm For more information or an appointment, you can contact me at any time. Phone: + 43 664 1296830 or Email:office@berger-international.at

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

Supports NOE 20-300 / NOE 20-350 , used Work economically, quickly and safely with robust Euro construction supports according to EN 1065 High load-bearing capacity Permissible column loads according to EN 1065 Long service life due to -Hot-dip / piece galvanizing -strong head and foot plate Low weight Wide adjustment range Protection against injuries caused by crushing protection 247 x Supports NOE 20-300, used, EUR 21,60 per piece 6 x stacking rack, galvanized, used, EUR 135,00 per piece 265 x Supports NOE 20-350, used, EUR 27,50 per piece 7 x stacking rack, galvanized, used, EUR 135,00 per piece Props NOE 20-300 / NOE 20-350 , used Work efficiently, safely and quickly using robust Europrops in accordance with EN 1065 High load capacity Allowable prop loads in accordance with EN 1065 Long service life through -Hot dip / discontinuous galvanising -St ...

Doka Frami panel formwork 335 m2 Handy and lightweight steel frame formwork for foundations, walls and columns. The lightweight Frami steel formwork with a robust, hot-dip galvanized steel frame is ideal for fast formwork with and without a crane. Quick and universal use thanks to many practical product details Cost-efficient due to excellent system properties Easy handling and planning thanks to a practical element grid Excellent concrete results due to particularly stable design Doka Frami Framed formwork 335 m2 Light and manhandled steel-framed formwork for foundations, walls and columns The lightweight Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly, anywhere thanks to its many practical details Cost-effective because of its outstanding system attributes Easy handling and plann ...

Just one blow of the hammer on the RU clamp is all it takes to pull the panels together and achieve a flush, correctly aligned panel joint that is resistant to tensile forces. The panels can be continuously height mismatched, i.e. without any pre-defined grid. This means that the formwork can easily be accommodated to e.g. steps, slopes and uneven ground, with no extra work.

Peri Trio 552m² Peri TRIO is a craneable formwork system that can be used upright or horizontally. Thanks to the patented BFD directional lock, all element connections are made flush, aligned and tight.  The only necessary connecting part for normal element joints, external/inner corners, articulated corners, shims up to 10 cm or the clamping of squared timbers is the BFD directional lock (can be operated with one hand). With just a few element widths, all floor plans can be formed. The powder coating prevents the concrete from adhering and allows for easy and quick cleaning. Maximum allowable fresh concrete pressure: 80kN/m2 Peri Trio 552m² Peri TRIO is a cranable formwork system that can be used standing or lying down. With the patented BFD alignment lock, all element connections are made flush, flush and tight.  The only necessary connecting part for normal e ...

Dokadek formwork The beamless hand formwork in lightweight steel construction. Quick assembly and dismantling High shuttering speed due to 3 m² elements Fast shuttering of larger ceiling heights without climbing aid due to element length 2.44 m Fast stripping due to simple and safe swivelling of the elements Quick and safe handling thanks to ergonomic grip holes in the edge profile of the large, rectangular elements Long service life due to galvanized frame Dokadek formwork The beamless hand-set formwork system as a lightweight steel construction. Fast assembly and disassembly High-speed forming with large panels measuring 3 m² Fast forming of greater room heights without ladder or platform systems thanks to 2.44 m long panels Fast stripping made possible by panels that are easily and safely tilte Long working life due to galvanized frame

Doka steel prop. • Effortless loosening of the adjustment nut due to special thread geometry • Less effort due to low weight • safe to use due to consistently high load capacity of at least 30 kN according to EN 1065 – • Easy height adjustment through hole numbering 35x columns Doka Eurex 20-300 top, used EUR 59,00 per piece 1x Doka stacking frame, galvanized, used, 1,55x0,85 EUR 105,00 per piece

Gabelkopf H20, verzinkt, Neu Ausführung mit 4 Winkelprofilen und Rohransatz mit Langloch, passend in alle DIN oder Euro Norm Gewicht 3,20 kg  ... more information

H16 Timber beam formwork girder Height 16cm, Width 65mm, Weight 3,3kg/meter The tried-and-tested components for many peeling systems. Formwork girders are basic of many formwork systems and can be used individually. The carefully manufactured beams prove themselves thousands of times a day on many construction sites. The location is our warehouse in 5202 Neumarkt For further information or a viewing, I am always at your disposal. You can reach us at Tel.Nr.: +43 664 1296830 or by e-mail: officeberger-international.at Berger Construction Equipment GmbH

Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance perfect as a supplement to large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus all-plastic sheet. • Handle profile on all elements • Snap edge on the large elements • Element widths up to 90 cm Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance, perfect as additional large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus solid plastic panel. • Handle profile on all elements • Knuckle edge on the large elements • Element widths up to 90 cm

New Generation Polymer Formwork Panels, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like conventional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Formwork plate made of polymer plastic - Weight of the plate 32kg - Dimensions 1.25 x 2.50m - Recyclable - € 20,55 per m2 New Generation Polymer Plywood, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like traditional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Polymer Plywood - Sheet weight 32kg - Dimension 1,25 x 2,50m - Recyclable - € 20,55 per sqm