Eccentric screw pump Manufacturer: Pumpenfabrik Wangen GmbH Type: 50 ST - V2A Serial number: 53-651 Material: V2A Flow rate: 10 m ³/h Operating pressure: 4 bar Revolutions: 470 RPM In very good condition!  ... more information

Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500  ... more information

High-pressure link pump with sliding ring seal - unused - (only one test run) self-priming, multi-stage Manufacturer: Dickow Type: HZS 1023 Built: 1986 Conveyor medium: Fuels Capacity: 60 m3/h Head: 60 m Power: 13.9 kW Temperature: 20C Application: Diesel - 3-stage pump of 60-120 m3 adjustable - impeller diameter 236 mm, - 1,450 rpm - EX-gun motor, 10.5 kW (Felton & Geom) General The self-priming, single- or multi-stage DICKOW link pump has been specially developed for the conveying of hydrocarbons in refuelling plants. HZS pumps are used in tank depots, for emptying tank wagons, filling high tanks, in hydrant systems at airfields, in airfields and many other applications where geodesic suction heights have to be overcome. The performance characteristic field has been graded in such a way that the most favourable efficiency is achieved in all applicatio ...

Materials: Housing: 1.4581 Wheels: 1.4408 wave: 1.4571 Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton Model A6: Pump on base plate mounted elastic coupled with 1.35 kW IEC standard motor, three-phase Pressure: 2 bar Revolutions: approx. 1,450 U/min Output: 1,200 l / h Mains frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 protection class: E ex eII T3 Design: B3 Pump partially unused in excellent condition!

Submersible pump Manufacturer: Netzsch Type: 4NT04 Length: approx. 1,80 m Characteristics of the immersion pump -insensitive to Sandy shares in the pumped liquid -pulsation promotion -very high suction capacity The immersion pump offers you: -low life cycle costs -high pressure stability -exact dosing accuracy Advantages of the immersion pump -Operation possible at high water content in oil -Reliability for oils with high viscosity -ready to use media with high fixed material freight Submersible pump is still unused, so as new and in very good condition!

Eccentric screw pump Manufacturer: Seepex Series: BN Size: 17 Pressure level: 12 Operating pressure: 10 bar Operating temperature: - 10 / + 30 Flow rate: 10 m ³/h Revolutions: 260 U/min Year of constr.: 1990 in very good condition!  ... more information

OPERATING POSITION... HORIZONTAL PUMP SET SIZE . 90.1 CONSERVATION SILICONE OIL ROTOR . . . . . . . . . . . . . 1.2436 U80 STATOR . . . . . . . . . . . . . NBR-LM 778/60-ST MOUNT RINGS... 1.4571 TENSION ROD MATERIAL... 1.4301 JOINT MATERIAL... . V4A JOINT DESIGN... . CARDAN (PW) ABGEDIC. CUFF... NBR TISSUE JOINT OIL... White oil EXTRA SHAFT SEAL... SPECIAL VERSION SUCTION CASING... V4A SUCTION... DN100/PN16-V2A SUCTION LOCATION TOP GASKET... NBR OUTLET... . DN100/PN16-V2A DRIVE flange [mm]... 250 Drive shaft [mm] 40 SHAFT MATERIAL... V2A LINEUP SPECIAL VERSION PUMP PROTECTION... WITHOUT ROTATION LINKS PUMP IDENTIFICATION... CHEEKS NAMEPLATE... STANDARD SURFACE PROTECTION... STANDARD C1 FARBE . . . . . . . . . . . . . RAL 9006 WEIßALU DRIVE... STIRNRADGETR.MOTOR DRIVE GEARBOX TYPE SEW RF77 ENGINE TYPE... DRE100LC4 PERFORMANCE... 3.0 KW ...

Homelite diaphragm pump with Yanmar diesel water pump type 111DP3-1, Small and handy self-priming water pump., Max: 18 m³/h, Max: 15 mWC, Of course you can always contact us if you have any questions., , Throughput capacity: 18 m3/h, Motor brand: Yanmar, Max. head: 15 MWK, Weight: 68 kg, , = More information =, , General information, Year of manufacture: 2006, Applicable material: Water, , Weights, Empty weight: 150 kg, , Functional, Connector size: 3 inch, Cargo space capacity: 300 l, Quick coupler system: Yes, , Condition, Technical condition: good, Visual appearance: good, Damages: none, , Additional information, Please contact John van Tongeren (+31620537017) or Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us,  ...

Bredel peristaltic pumps 32, Bredel peristaltic pumps have no valves or seals to leak, clog or need to be replaced, and deliver flows of up to 17,520 L/h and pressures of up to 16 bar., They can pump viscous and abrasive slurries, pastes and sludges, with up to 80% solids in suspension., Unlike other pump types, the highly abrasive nature of grain-filled sludge or stone dust slurry in the water board market does not affect the life of the peristaltic hose pump., Bredel peristaltic pumps eliminate peripheral equipment such as dry-running protection, seal-water flushing systems and check valves in the pipe. They are also reversible for flushing pipes., , • Dry running and self-priming, • Suction capacity up to 9.5 mwk (354 inWC), • No seals, check valves, diaphragms, thrust rings, submerged rotors, stators or pistons that could become clogged, leak and corrode, or require replacement ...

Bredel peristaltic pumps 20, Bredel peristaltic pumps have no valves or seals to leak, clog or need to be replaced, and deliver flows of up to 17,520 L/h and pressures of up to 16 bar., They can pump viscous and abrasive slurries, pastes and sludges, with up to 80% solids in suspension., Unlike other pump types, the highly abrasive nature of grain-filled sludge or stone dust slurry in the water board market does not affect the life of the peristaltic hose pump., Bredel peristaltic pumps eliminate peripheral equipment such as dry-running protection, seal-water flushing systems and check valves in the pipe. They are also reversible for flushing pipes., , • Dry running and self-priming, • Suction capacity up to 9.5 mwk (354 inWC), • No seals, check valves, diaphragms, thrust rings, submerged rotors, stators or pistons that could become clogged, leak and corrode, or require replacement ...

Bredel peristaltic pumps 32, Bredel peristaltic pumps have no valves or seals to leak, clog or need to be replaced, and deliver flows of up to 17,520 L/h and pressures of up to 16 bar., They can pump viscous and abrasive slurries, pastes and sludges, with up to 80% solids in suspension., Unlike other pump types, the highly abrasive nature of grain-filled sludge or stone dust slurry in the water board market does not affect the life of the peristaltic hose pump., Bredel peristaltic pumps eliminate peripheral equipment such as dry-running protection, seal-water flushing systems and check valves in the pipe. They are also reversible for flushing pipes., , • Dry running and self-priming, • Suction capacity up to 9.5 mwk (354 inWC), • No seals, check valves, diaphragms, thrust rings, submerged rotors, stators or pistons that could become clogged, leak and corrode, or require replacement ...

Year of manufacture: 2021, Length: 600 cm, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 17.00 on Saturdays or in the evenings by appointment.

Bredel peristaltic pumps 20, Bredel peristaltic pumps have no valves or seals to leak, clog or need to be replaced, and deliver flows of up to 17,520 L/h and pressures of up to 16 bar., They can pump viscous and abrasive slurries, pastes and sludges, with up to 80% solids in suspension., Unlike other pump types, the highly abrasive nature of grain-filled sludge or stone dust slurry in the water board market does not affect the life of the peristaltic hose pump., Bredel peristaltic pumps eliminate peripheral equipment such as dry-running protection, seal-water flushing systems and check valves in the pipe. They are also reversible for flushing pipes., , • Dry running and self-priming, • Suction capacity up to 9.5 mwk (354 inWC), • No seals, check valves, diaphragms, thrust rings, submerged rotors, stators or pistons that could become clogged, leak and corrode, or require replacement ...

HDPE drain pipes 110 x 5.3 mm with a length of 6 meters Equipped with M and V part perrot/cardan mounted with heavy clamp, 60 pieces. sale without tubes container/pallet,, , = More information =, , Year of construction: 2023, , = More information =, , Year of manufacture: 2023, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , coupling systems and fittings. A physical visit to our location is very well possible! Make your visit known in advance to avoid disappointment. Visit : from Monday to Friday from 08.00 to 1 ...

New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2024, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Damages: none, P ...

BBA GHP 100 BBA high pressure pump. This BBA pump with high head is suitable for many applications. The powerful Perkins engine is built into a sound-dampened housing. Max. capacity 225 m3/h Max. Head 78 mwc. Available with any connection you require. Are you unsure whether this machine provides the desired working point for you? or you would like more information about delivery options. Do not hesitate to contact us, we are happy to assist you!, , Throughput capacity: 225 m3/h, Max dirt passage: 30 mm, Max. head: 77 MWK, Max dirt passag: 2300 rpm, Weight: 2650 kg, , = More information =, , Applicable material: Water, Empty weight: 4.000 kg, Cargo space capacity: 3.750 l, Technical condition: good, Visual appearance: good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer info ...

This BBA PT150 with strong 7.5 kW electric motor can be used well on large construction projects, where the power supply is often well regulated. Then this PT150 with electric motor is a good choice., Environmentally friendly, not much maintenance, so an investment that pays for itself quickly., This PT150 is electrically powered and built into a robust galvanized stacking frame., , Max. capacity :90 (m3/hour), Max. head :20 (mwc), Max. suction height : 9.6 (meter), , Throughput capacity: 90 m3/h, Max. head: 20 MWK, Max dirt passag: 1485 rpm, , = More information =, , Year of manufacture: 2016, Applicable material: Water, Empty weight: 1.500 kg, Connector size: 4, Cargo space capacity: 1.500 l, Technical condition: good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, ,  ...

BBA BA100K D193, This diesel-driven 4 waste water pump is the best performing mobile pump set in its class. With a dirt passage of 82 mm, the chance of blockage is zero, even on the most polluted sewer jobs., The economical 1-cylinder Hatz diesel engine with DriveOn® technology guarantees minimal fuel consumption and long maintenance intervals., , Maximum 135 m3/h and head up to 17 mwk, Dirt passage 82 mm, , Can be supplied with any desired coupling/connection., , Throughput capacity: 135 m3/h, Max dirt passage: 82 mm, Motor brand: Hatz, Max. head: 17 MWK, Max dirt passag: 1500 rpm, Weight: 1300 kg, , = More information =, , General information, Year of manufacture: 2017, Applicable material: Water, , Weights, Empty weight: 1.300 kg, , Functional, Connector size: 4 Cardan, Cargo space capacity: 2.250 l, Quick coupler system: Yes, , Condition, Technical condition: good, Visual appearanc ...

Dont miss a drop with this impulse digital water meter, designed to accurately track your water discharge. Heres why its a must-have for your drainage installation:, Insight: With this digital water meter you have immediate insight into the amount of water you are pumping. No more guesswork, just accurate information., Easy Installation: No more hassle with complicated installations. Our digital water meter can be easily installed, so you can immediately benefit from the benefits., Dont wait any longer and choose our digital water meter today., Contact us for more information and find out how you can start measuring flow!, , = More information =, , Year of manufacture: 2024, Colour: Grey, Connector size: 4 Cardan, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrad ...

The smallest pump in the BBA series, developed with an emphasis on, reliability, durability and efficiency. The, pump is equipped with an open impeller that opposes, an interchangeable wear plate rotates. The pump has a non-return valve on the suction side. It is equipped with a vacuum pump so that it is self-priming. Mounted on a wheelbarrow base so it is easy to move and powered by a reliable Hatz diesel engine., , max. capacity..35 m3/hour, max. delivery head..18 mwc, Materials..Cast iron, Connecting Parts 2ʺ, Dirt passage...25 mm, , Throughput capacity: 35 m3/h, Max dirt passage: 25 mm, Motor brand: Hatz, Max. head: 18 MWK, Weight: 55 kg, , = More information =, , General information, Year of manufacture: 2001, Applicable material: Water, , Weights, Empty weight: 60 kg, , Functional, Connector size: 3, Cargo space capacity: 585 l, Quick coupler system: Yes, , Condition, Technical co ...