machines and plants for process engineering used for sale

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.  ... more information

Compactor  ... more information

Motor 75 kW Rotor blades: 5 Bu9dtai0he Stator blades: 2 Rotor diameter: 600 mm Rotor width 780 mm Inlet opening: 720x780 mm ... more information

Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw ... more information

Rietschle vacuum pump CLF 60V 60m3/h, 1400rpm, intake pressure 1 torr, 1.5 KW  ... more information

Double-walled heating tank (capacity approx. 1 m³) incl. heating station and switchgear for media heating. Heat transfer medium thermal oil (approx. 200 l), container insulated with foam glass Heating station consisting of 8 electric heating elements (each 6 kW - forcibly flowed, monitoring) incl. pump (Fabr. Speck + spare pump), incl. control cabinet Container was used for heating wax (heating medium approx. 75-90°C)

Vacuum pump Becker KVT 3.100 good condition, tested, fully functional 400V/ 3kW 50Hz, 100m³/hour, maximum -900 mbar a matching filter cup and check valve can be installed at an additional cost  ... more information

A striping machine for ceramics, for example. Built by German SAMA MASCHINENBAU GmbH. NEW only tried on. The price of a new one in 2006 was €39,250.00.  ... more information

Pressure casting machine Netzsch Year model 1989. Refurbished: new lines, membrane and mass compression hydraulic piston seals. Had 12 years with very little use. The machine is a former Fiskars Oyj, E4361575 Arabia Finland. The machine is in full working order.  ... more information

Vibratory sieve Power : 22 kW Voltage : 400V /230V 50Hz rpm : 920 Capacity : Unknown  ... more information

The onus screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 4500L Operating temp. : 25-35 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :65 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 1kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Impact forming mill is used for dry and fine grinding of brittle materials with a hardness of up to 3 Mohs. the impact fine grading mill combines efficient impact grinding with efficient classification in one unit. The supplied materials are thrown into the liner by the milling tools at a speed of 60-130m/s and then shredded. the ground material is transported to the integrated cashier for processing by means of air and rotation of the grinding tool. the fineness can then be infinitely adjusted via the speed of the classifier. Particles that are too large are sorted out by classifiers and end up in the grinding zone for continuous comminution.

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Vibrating screen from Sweco Power : 1,5kW Voltage : 220V Protection : IP 55 Amperage : 6,9A  ... more information

Features and advantages of the classifier mill ACM: • Grinding and classifying in one machine. • Excellent selectivity, steep particle size distribution. • Infinitely adjustable fineness. • Flow-optimized, conical classifier wheel guarantees product without oversize grain and low wear compared to cylindrical classifier wheels. • Cool and gentle grinding due to high air flow. This makes the ACM ideal for processing temperature-sensitive products. • Deflection area in the grinding chamber lid: classifier gap flushing not required. • Low noise emission. • Very good running characteristics due to the belt-driven grinding disc. Bzc3pyxj32 • Easy to maintain: motors and bearings easily accessible. • The lid lifting device allows quick access to the grinding and viewing zone for cleaning and retrofitting. • Extremely compact and space-saving design. • Option ...

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Conical screw mixer works according to the proven principle of a rotating mixing screw, which is guided along the conical tank wall at a constant distance by means of an orbital alarm. The product flow is characterized by an intensive but gentle mixing of the individual particles. Suitable for demanding products in the pharmaceutical, chemical or food industries, it ensures a uniquely gentle mixing process. General data: Volume : 2000L Operating temp. : 20-25 °C Operating voltage : 380V Frequency : 50Hz Ingress protection : EExe II T,IP54 (200-300 °C ) atmosphere( protection against ingress of particles) Mixer auger: -Rpm. :58 -Diameter screw blades : 300mm -Pitch : 250mm -Thickness 3mm Swivel arm: -Power : 0.55kW -Rotation speed : 6m/min. -Voltage : 380V -Frequency : 50Hz

Screening plant unfortunately no nameplate so no information about the system  ... more information

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank: 5L Power : 12,5kW Voltage : 380V Weight : 450kg

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank : 50 litres Power : 45 kW Voltage : 380 V Weight : 1050kg