- Barking machines (6)
- Central heating installations (14)
- Charging plants (20)
- Chip exhaust installations (2)
- Clean air extraction units (3)
- Combi-machines (41)
- Creel (2)
- Double-end tenoning machines (8)
- Extraction Systems (41)
- Filtering units (1)
- Gang saw systems (5)
- High-speed clamping carriages (1)
- Hydraulic trimmers (2)
- Lathes (20)
- Lifting devices (14)
- Macerators (13)
- Mitre joining machines (2)
- Mitre punching machines (2)
- Pallet lines (9)
- Portable dust extractors (3)
- Remote-controlled carriages (1)
- Resawing machines (2)
- Scraper conveyors (1)
- Shredder (29)
- Suction units (9)
- Transportation belts (37)
- Wood crushing machines (27)
- Wood shredding systems (19)
- Wood turning lathes (8)
- Woodturning lathes (13)
- more
- A. COSTA (1)
- ABB (2)
- ACKERMANN (1)
- ADDA (1)
- ADOLF ALDINGER (1)
- AEG (1)
- Aircraft (3)
- AIRCRAFT AIRSTAR (1)
- AIRHEAT (1)
- ALBUS (1)
- Alko (5)
- ALLGAIER (1)
- ALMAB (1)
- Alu (3)
- AMANO (1)
- AMBOSS + LANGBEIN (1)
- ANGELO CREMONA (1)
- ASPIR EELEC (1)
- ASTRA ASPIRAZIONI DUE (1)
- ATLAS (1)
- Babcock (2)
- BACCI (2)
- Bajler Zembrod (2)
- BALDUF (1)
- BALESTRINI (1)
- BAR GAR (1)
- Barbaric (2)
- BARBERAN (1)
- Barth (2)
- Bartling (3)
- BAUMANN (1)
- BöSCH (1)
- BECKER (3)
- BENTELE (1)
- BESCHLAGWAGEN KOMMISONIERUNG (1)
- BEZOMBES (1)
- Biesse (6)
- BISON (1)
- BLüMLINGER (1)
- Bohm und Kruse (2)
- BOSITICH (1)
- BRANDT (25)
- BRAUN (1)
- BREVETTI (1)
- BRODPOL (1)
- BRUECK (4)
- BRUKS (3)
- BRUKS-KLöCKNER (1)
- BUSELLATO (1)
- CABO (1)
- CALZONI / SPERRY VICKERS (1)
- CAMAM (4)
- Cambio (2)
- Casadei (2)
- CASATI MACCHINE (1)
- CAT BLOWER (1)
- CATTINAIR (1)
- CEFLA (1)
- Celaschi (2)
- CENTAURO (4)
- CKM (1)
- CLAAS (1)
- CMA-ITALY (1)
- CNC-STEP (4)
- CO.MA.FER (1)
- COMAFER (1)
- COMEC (4)
- COOK BOLINDER (1)
- COOK BOLINDERS (1)
- COOK BOLINDERS + MECOUTIL (1)
- COPCAL (1)
- COSTA (1)
- CPM (1)
- CRIZAF (15)
- DEC (5)
- DHB (1)
- DIETZ VAKUUMTURBINE (1)
- DIETZ VAKUUMVENTILATOR (1)
- dimter (3)
- DIVERSE (1)
- DMC (1)
- DUSTCONTROL (1)
- DüCKER (1)
- EDELSTAHL (1)
- ELEKTRA BECKUM (1)
- ELEKTRA-BECKUM (1)
- Elektror Karl W. Müller (2)
- ELU (2)
- EMK (2)
- ENDRESS (1)
- ERNST (1)
- ERRE AUTOMAZIONI (1)
- ESTA VENTILATOR (1)
- Esterer (2)
- EUROVENT (1)
- EWD (1)
- EWD ESTERER (1)
- FABBRI (13)
- Felder (5)
- Ferrari (4)
- ... more
Manufacturer:
(Category: 209)
New in: 2001
used
Minimal/ nominal volume flow: 1448/ 1850m³/h, motor power: 2.2kW. ... more information
New in: 2001
used
Length: 11,250mm, width: 5250mm, height: 2600mm. ... more information
New in: 1997
used
Workpiece dimensions: 150-1000x50-205x35-50mm, end length: 3000-6000mm, connected load: 80kW, length: 15,480mm, width: 5500mm, height: 2000mm, weight: 10.5t, including documentation. ... more information
New in: 2002
used
Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW. ... more information
New in: 1998
used
New in: 2000
used
Connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm. ... more information
New in: 2002
used
Current: 50A, nominal voltage: 400V. ... more information
New in: 2001
used
Max. workpiece dimensions: 3000x1050mm, connected load: 31kW, length: 5750mm, width: 3750mm, height: 2400mm. ... more information
New in: 1999
used
With feeder and destacker Wemhöner 184. ... more information
New in: 2002
used
Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible. ... more information
New in: 2004
used
Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. ... more information
New in: 2009
used
Volume flow: 27,000m³/h, pressure increase: 3800pa, fan belt length: 3550mm, motor power: 55kW, available after June 2023. ... more information
New in: 2005
used
Laser type: CO2, Rated power: Originally 200W, upgraded to 400W, Working range X/Y: 1300mm/1600mm. Material capacity: Plywood, MDF, cork, wood products, cardboard, paper, various plastics, textiles, acrylic glass. Dimensions X/Y: 2080mm/2300mm. Maintenance: August, 2023 - Laser power: 240W. Overhaul of beam source recommended. Including laser cooling with hoses and control cable, PC workstation with CAD program Casmate 6. Operating hours: 75783h. Documentation available.
New in: 2014
used
Edge thickness: 0.4-10mm, feed rate: 12m/min, connected load: 11kW, operational hours counter: 12,314h. ... more information
New in: 2012
used
Suitable for processing door seals, control: SIEMENS SIMATIC, with documentation, an on-site inspection is possible. ... more information
New in: 1989
used
Workpiece length: 1800-4200mm, max. profile height: 200mm, min. workpiece thickness: 16mm, working height: 950mm, connection cable: 12kW, length: 6250mm, height: 2050mm, weight: 3.8t. ... more information
New in: 2021
used
Connected load: 18kW, length: 1500mm, width: 600mm, height: 1700mm, weight: 650kg. ... more information
New in: 2001
used
Operational hours counter: ca. 40,000h, there is little documentation, has been serviced regularly, suitable for aluminum and wood, available from June/July 2024, an on-site inspection is possible. ... more information
New in: 2006
used
An inspection is possible. ... more information
New in: 1997
used
Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. ... more information