other wood working machines used for sale

Turning machine Tip height 150 mm Tip width 650 mm 2 speeds Flat disc diameter 240 mm Electricity connection luminous flux Dimensions 1230 mm x 620 mm x H 1620 mm  ... more information

Manufacturer: Almab Production year: 2003 Try sorting with 6 pockets Speed: 15 layers per minute Max leght boards 6000 mm Pack 1200X1200X6000 mm (max hight 1400) Max thickness 100 mm infeed conveyors separator turbo separator end milling units left and right feeding chain conveyor measurement scanner roller conveyors board turner to pockets outfeed after pockets one piece feeder three saw trimmer stacker with double packing arms stick cassettes outfeed conveyors pack press Fromm plastic wraping system package stacking machine

Wet or dry milling line capacity 60-65 m3/h Hammermill Grindingplatemill Rematec RPM 1000 electric motor 250 kW, • screwinput 3 × 3 kW • hammers made of wearresistant material • grindingplates casted of wearresistant material respectively hardened material Feeding container with moving floor Screw conveyor feeding rotary disc screen Screw feeder to screwinput RPM 1000 Screper conveyor

Pellet mill / press CPM 7900 aftre renovation Dia inch : 30 - 762 mm Die width : 8 - 210 mm Die surface 5025 cm² KW : 250 KW Machine type : 7900 Buildyear : 1984 Width rollers : 215 mm Dia rollers : 350 mm 1 set rollers Oil cooling Twin mixer 2 x 15 KW / Die Hosting system New inlet in stainless steel

FUJI KING DEBARKERS CAPACITY 200t/h ( one double section 60 t/h) USED EQUIPMENT, DISASSEMBLED, WASHED, LOADED ON TRUCKS AND CONSOLIDATED IN CONTAINER. MODEL KD6/50DT (EACH DEBARKER) YEAR OF MANUFACTURE 1995 TECHNICAL SPECIFICATIONS OF EACH EQUIPMENT: • TWO (2) DOUBLE ROTOR SECTIONS EACH. • SECTION LENGTH OF 7.65 mt (25') • TOTAL LENGTH OF 15.3 mt (50´) • WIDTH OF THE INTERIOR COMPARTMENT OF PIECES OF 2.4 mt. • MAIN ROTORS DIAMETER 0.9 mt. (36”) x LENGTH 7 m (23’) • POWER SYSTEM: 2 ENGINES 575 V 60 Hz 100 HP CONNECTED TO THE REDUCER MOTOR AND DRIVING THROUGH CHAIN. • VARIABLE SPEED FROM 16 TO 50 RPM. • DISCHARGE DRIVEN BY VERTICAL CHAIN AND MOTOR 575 V 60Hz 3HP • NET WEIGHT: 42 TONS PER SECTION - 2 SECTIONS 84 tons TOTAL. EACH KIT DOES INCLUDES: ❖ WAIST BARK BELT CONVEYOR ❖ FEED ROLLERS ❖ SUBSTRUCTURE FOR SUPPORTING FOUNDATIONS, CON ...

Dimensions 2,0 x 1,2 x 1,55 m Grindstone diameter 250mm Diameter of matrix 1,2m Grinding cross Movement 200mm Grinding longitudinal Movement 450mm Consumable power3kW Grinding thickness of the matrix per cycle - 1/100 mm or 4/100 mm. The required number of cycles is adjustable. Electrical connection of the unit - 380V, 50Hz, 3 phases. Weight 545 kg

Dimensions 1,6 x 1,4 x 1,44 m Grindstone diameter 250mm Diameter of rolls 0,13 … 1,1m Grinding cross Movement 200mm Grinding longitudinal Movement 450mm Consumable power 3kW Consumable power 3,5 kW Electrical connection of the unit - 380V, 50Hz, 3 phases. Weight 545 kg  ... more information

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Valonkone Debarking Machine VK450 Year of construction: 1987 ( current photos coming soon - only sample photo ! ) Debarking diameter (mm) 80 - 480 Min. trunk length (m) 2,2 Weight (kg) 13.500 Motor: Rotor (kW) 55 Engine: Feed unit (kW) 3x11 Refurbished / workshop tested Valonkone debarking machine: The renovation process essentially includes: - Mending the sheets, replacing recesses - Check rotor bearings, check knife axes and partially repair them. - Order bearings and wear parts (cardan shafts). - Repairing tables and attaching new plates to the edge strips, in some cases new conveyor chains. - New straps - Check and repair geared motors. - New control cabinet - Partial sandblasting or rust removal and re-priming The VK450 debarker was the first of the "new generation" of VK debarkers, followed by the VK600 and VK800 models. It quickly became the most sought- ...

KRÜSI chalet construction machine / log cabin production system type CM 40 POS 1: Motor-driven roller conveyor Working width 400mm, infinitely variable feed speed 2.0 kw motor, length 6000mm POS 2: Ripsaw Diameter saw blade 400mm Pneumatic feed of the sawing depth Main motor 4.0 kW POS 3: KRÜSI chalet construction machine / log cabin production machine type CM 40, year of construction approx. 1985 Horizontal milling unit Cutter - Ø 180mm Cutter width max.130mm from cutter width 60 mm only cutters made of aluminum alloy with 1 motor with manual feed, kW 2.2 POS 4: Drilling unit: Hydropneumatic feed Clamping Ø max. mm 16 Drill bit- Ø max. mm 32 Motor min'1 1450, kW 1,8 POS 5: KKRÜSI RÜSI chalet building machine / log cabin production machine type CM 40 Machine No.431 Year of construction: 1996 Sawing unit: Hand feed Spindle adjustment wit ...

Top-equipped automatic trimmer in very good condition, with loading on both sides! 3 Movable flanges and new controls! 2 x board separator The fed boards are separated with 2 S-shaped chain cross conveyors. Hydraulically actuated ejectors eject when the Take the leading board back. A fast-running cross conveyor takes over the board after separation and feeds it to the assessment and manipulation station. Double-sided feeding, control NEW! (OPTILINE) The BKO trimming circular saw has two overhead width-adjustable saw shafts, each with a blade flange. on the saw shafts (BKO 3). With one separating flange per side and adjustment via telescopic shafts. The width adjustment is servo-hydraulic.

Remote-controlled gate loading system H38 For the block-initiating gate incision at high feeds. The gate guide sits in a stationary operating stand with a good overview of the entire cutting system. The machine is in very good condition and can be delivered with new control on request! ... more information

Roller conveyors Stable 8 wheels with a diameter of 50mm Width 250mm Length 2.6m G&-5067  ... more information

Roller conveyor adjustable with support feet 6 castors with diameter 50mm Width 30mm Length 2m G&-5068  ... more information

Roller conveyor 5 wheels 1.5m G&-5069  ... more information

Gubisch Umfaelzer with 3 spindles, including olive drill, ; ready for use  ... more information

Shear grate firing power 1,000 kW computer control max. pre-temoerature 110 C dismantled by specialist company and is in stock  ... more information

ELU TYPE MVA 34 Power: 600W (380V) 3-Wheels infinitely variable: 3 - 23 m/min. Condition of the rolls: as good as new new adjustment wheel for infinitely variable speed Connection cable renewed ex location  ... more information

ELU TYPE MVA 34 Power: 600W (380V) 3-Wheels infinitely variable: 3 – 23 m/min. Condition of the rollers: good ex location  ... more information

Frame press Hess Technical description: - 2 pneumatic pressure cylinders in length - 2 pneumatic pressure cylinders in width - 2 pneumatic workpiece holders - Feed bandwidth: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping area: 680 x 1,400 mm - Control panel Dimensions: - Length: approx. 3,400 mm - Width: approx. 1,700 mm - Height: approx. 1,400 mm - Weight: approx. 800 kg