Manufacturer:
(Category: 209)
Centrifugal fan, dust extractor fan, fan, extractor, dust fan-Motor: Siemens type 1L4 206-6AA60-Z 200L-Motor power: 18.5 kW-Speed: 975 rpm-without: housing-Impeller outer diameter: 960 mm-wing height: mm-Dimensions: 1425/1115/H1390 mm-Weight: 412 kg ... more information
Centrifugal fan, dust extractor fan, fan, extractor, dust fan-The fan comes: from a chip filter system-Motor: Siemens type 1L4 207-6AA60-Z 200L-Motor power: 22 kW-Speed: 975 rpm-without: housing-Impeller outer diameter: 960 mm-wing height: mm-Dimensions: 1425/1115/H1390 mm-Weight: 412 kg ... more information
working width: 1250 mmmaximum length of workpieces 3500 mmfeed speed 2.4 - 7.5 m / minfinishing line consisting of the following elements:- infeed conveyor- brush sander with 4 transversal brusches- brush sander with 2 longitudinal brushes- dust removal with brush and blowers- Spray cabin Rotoclean G8 rotating arm with 8 pistols workpiece recognition for saving paint workpiece transport with steel belts recuperation and cleaning steel belts air cleaning with water curtain- 3 lacquer pumps GRACO 015.085- 7 pumps for color stain GRACO Husky 515- intermediate conveyor- cross transport with rods and overhead hot air dryer- intermediate conveyor- drying tunnel with IR lamps- UV dryer with 2 lamps- outfeed conveyor
Single-shaft chipper with rotor width of 122 cm Rotor diameter 500 mm 37 kw motor hydraulic gate valve New rotor bearings ... more information
Length stop with roller conveyor Length: 3 meters Handwheel adjustment Measuring tape with magnifying glass ... more information
Manufacturer: IMA, Type: Advantage 8200, Year: 2003, Min-max edge material mm: 0,4-20, Work piece width min-max mm: min. 60, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 4-20, Premilling: yes, Mitre stations: yes, Radius scraper: yes, Flat scraper: yes, Profile sanding top bottom: yes, Weight approx. kg: 4400, Year :2003
Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: yes, Spraying system 2: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Separation agent setup: yes, Year :2003
Stack machine for lumber length 2.0 m to 5.5 m plant suitable for the formation of stack widths of 1.0 m to 2.0 m heavy duty for double packages with intermediate lift table. System Board separation, registration, user location clamp, rotating tongue, Zwischenhubtsich and package cross conveyor. Complete with control. Stacking machine for timerlength of 2.0 up to 5, 5 m. Heavy duty style for double package 1.0 m up to 2.0 paketwidth! Complete equipment from unscrambler, even ending roller conveyor, layerbuilding with hydraulic stopper lifting table for double package including stacking unit in between.
Description: ⢠Wood chipper, wood waste shredding machine, wood shredder ⢠Serial number 500-5944 ⢠Main motor power 18.50 KW ⢠Rotor length 600 mm ⢠Rotor diameter 256 mm ⢠Rotor rotation speed approx. 90 rpm ⢠Hopper volume approx. 430 liters ⢠Dimensions of the hopper loading opening approx. , 800 x 600 mmApprox. Onsite Dimension. (l x w x h): 1,850 x 1,200 x 2,600 mm, weight approx.: 1,500 kg
Manufacturer: KUKA KR 180, Year: 2004, Max workpiece weights kg: 180, Year :2004 ... more information
Manufacturer: Kuka KR 180-2 2000, Year: 2004, Max workpiece weights kg: 180, Year :2004 ... more information
turning speeds: 90 U/minfunnel opening L-W: 800 x 1.200 mm: 1,1 mÂłrotor dia: 354 mm: 40 mmDust suction hood: 200 mmDimensions (L/W/H): 2.650 x 1.740 x 1.730 mmweight: ca. 2 ttotal power requirement: 37 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
Brush machine Wandres type Ingromat Cleaner CF04/400 Specifications: ⢠Working width (mm): 400 ⢠Brush: top and bottom ⢠Spraying device ... more information
ALKO ECO-JET 35/3N clean air extraction Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A)
Description: ⢠Cleaning brush unit for wide belt sander ⢠Brush length approx. 1400 mm ⢠Roller diameter 240 mm ⢠Motor power 4 KW-1440 rpmApprox. Onsite Dimension. (l x w x h): 1,900 x 420 x 950 mm, weight approx.: 200 kg ... more information
Manufacturer: HÜcker, Type: K 35/250 Späneventilator, Year: 03/2004, Engine power kW: 18,5, Flow rate approx. m3/h: 5700, rotations rpm: 1500, V-belt drive motor: yes, V-belt pulley impeller: yes, Suction side mm: 250, Outlet side mm: 350, Wight approx. kg: 420, Year :03/2004 ... more information
Hurricane Pulse Filter Model JSS-4 33-300 Capacity 37,500 mÂł/h Filter area 300 m² 180 pcs filter bags Dimension filter bags 160 x 3300 mm Air-conditioned control cabinet as good as new year 2012 incl. all return air ducts incl. centrifugal fan HF 2/500 â R, 30 kW with 15,700 mÂł/h incl. centrifugal fan HF 2/550 â R, 30 kW with 19,300 mÂł/h incl. 1 pcs spare motor 30 kW incl. a complete set of new replacement filter bags incl. 3 Gottwald tubular screws from rotary valve to silo, 1 x 3500 x 194 mm 0.55 kW, 2 x 6,000 or 9,000 x 219 mm 1.1 or 1.5 kW Dismantling can be organized Subject to errors, changes and prior sale
Description: ⢠Power: 22 KW eachApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 500 kg ... more information
Description: ⢠Power: 22 KW eachApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 500 kg ... more information
Description: ⢠Lot of 2 electronic sectioned sanding pads with 56 sectors for wide belt sander ⢠Dimensions of each unit: approx. 1600 x 150 x 260 mm ⢠Sanding pad length , approx. 1500 mm ⢠They include the control cards that appear in the photographsApprox. Onsite Dimension. (l x w x h): 1,600 x 800 x 300 mm, weight approx.: 150 kg