veneer machines used for sale

I sell the double knife veneer shears Josting ZFS 2800, built in 1997. Cutting length 2810mm. Cutting height 80mm. Cutting width 20-470mm. Very good condition. Available soon.  ... more information

Roller dryer Babcock Veneer dryer type: RD III 460 / 6 m - K.1 s "1" year of manufacture: 1991 Working width 4600 mm Heated length 6000 mm 1 m cooling field 3 floors each field is 2 m long Fans 2-stage 3.5 kW/ 12 kW Steam power 800 kW Feed speed infinitely variable 0 – 28 m/min.  ... more information

Veneer scissors Hymmenia Type: AS 2600 Cutting length 2600 mm Two-hand gearbox Insertion height 80 mm Maximum cutting width at rip fence 800 mm Minimum cutting width approx. 20 mm Motors 4/6 and 2.2 kW Weight approx. 2,600 kg Dimensions 3500 mm x 1900 mm x H 1750 mm  ... more information

Veneer peeling plant RFR – Keller - Centering basement GZB - Peeling machine RFR Type 9 PA 23 max. clamping length 2300 mm Clamping diameter up to max. 1000 mm, peels down to 95 mm Right telescopic spindle new in 1986/1987 for 100,000 DM including waste gutter with extra intermediate trestles for shorter parts 55 kW DC motor infinitely variable Powered by diesel generator 69 kW Consumes less than 200 ltr./week at 8 hours a day/ 5 days a week - Automatic rewinding with magazine from cellar to width 1350 mm - Automatic processing cellar - Scanner length 2400 mm - Veneer clipper Keller working length 2400 mm - Self-made stacking Dimensions of the entire line: 26 m long x 4 m wide

Veneer peeling line RFR Clamping length max. 2300 mm with manual winding and unwinding with scanner with veneer clipper cellar with MAN diesel engine approx. 130 hp  ... more information

Tried-and-tested veneer spacing machine, veneer sewing machine from Kuper FW/M 630 T Projection 630mm Power supply 230V Shifting via foot pedal 3 spools of glue thread Threader Release The machine is set. You can get started right away. Operating instructions The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Proven veneer spacing machine, veneer sewing machine from Kuper FWJ920 Veneer thickness approx. 0.3 - 2mm Feed speed approx. 15 m/min Projection 920mm Power connection 380V / 0.45kW Automatic start via contact brush, interruption via foot pedal 1 spool of glue thread Threader Release Operating instructions The machine is set. You can get started right away. Original paint, only a few paint spots touched. Pressure reducer and all V-belts renewed Dimensions approx. 1350 x 500 x 1750mm (LxWxH). Weight approx. 185kg. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

with integrated glue indication Veneer thicknesses 0.4 - 2 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English 13.2.3.  ... more information

Stand projection 910 mm Feed rate approx. 15m/min. constant Drive motor 0.18 kW Total connected load 0.45 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English 13.2.7.  ... more information

Working width 800 mm You can call or write to us. We can speak and write German and Russian. You can also send messages in English.  ... more information

Cutting and planing Cutting height 40 mm Cutting length 3050 mm We can send videos and more photos. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 13.3.1  ... more information

Veneer die-cutter Cutting length: 3100 mm Cutting width: 600 mm Electromotive width stop adjustment Electro-hydraulic drive of the pressure beam and veneer knife Hydraulic motor: 4 kW, cutting height: max. 50 mm Biprgxzjj9n Operating voltage: 3 x 400 V + N, 50 Hz Electromotive width stop adjustment on hardened and ground recirculating ball bushings Drive motor for width stop: 0.25 kW, 400 V/50 Hz Electronic width display Safety equipment: Two-hand operation with light barriers Space requirement: approx. 3800 x 1640 mm Weight approx. 3300 kg

Veneer gluer Kuper Stand unloading 630mm Feed approx. 7m/min Drive electric motor 25Watt, 190Volt Connection voltage 220Volt  ... more information

Veneer length max. 2600mm, processing table total width 1200mm, veneer pack height approx. 60mm  ... more information

Dates will follow later!  ... more information

Veneer assembly machine model FW 1100,  ... more information

veneer assembler Modsell FW/M 630 year 95  ... more information

Veneer assembly machine model FWL 1200, Joining, gluing, thread and white gluing  ... more information

SPECIFICATIONS: working length mm: 630 Dimensions of the workbench mm: 700 x 380  ... more information

SPECIFICATIONS: Hydraulic veneer shears cutting length: 4800 mm Cutting thickness: 3 mm Inlet table with 8 collets  ... more information