veneer machines used for sale

Plate dimensions: 2.500 x 1.250 mmDaylight opening: 400 mmNumber of daylights: 4 St.Heating: elektrisch Specific pressure: 2,9 kg/cm²Total pressure: 90 toMotor output: 2,2 kWweight of the machine ca.: ca. 2.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 3000mm. ... more information

Working width: 800mm, nominal current: 2A. ... more information

Cutting length: 2330mm, insertion height: 80mm, length: 3410mm, width: 1650mm, height: 1570mm, weight: 2.4t. ... more information

Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm. ... more information

Basic machine complete with: - with automatic feed - circular saw unit 2,2 kW (3 hp) with pneumatic height adjustment - Axial mechanical adjustment of the saw, adjustment field stepless from 0 to 2 mm - high-precision double ball bearing slides for the moving parts - pressure beam controlled by two lateral pneumatic cylinders, equipped with torsion bar - plastic cable chain - connecting piece Ø 120 mm - HM- saw blade Ø 180 mm - Lubrication unit with filter complete with gearbox and pressure gauge on the air line - service tools - safety devices type: FILA 31 Usable cutting length 3.100 mm type: FILA 37 Usable cutting length 3.700mm type: FILA 43 Usable cutting length 4.300mm

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

Splicing machine with glue thread Make: Casati Type: Z 2000 technical details: arm length: 1.200 mm veneer thickness: 0,4 - 2 mm feed speed: approx. 5 - 40 m/min. noise measurement: 73,5 dB compressed air consumption: 0,05 l/min working pressure: 6-8 bar overall dimensions: 2.050 x 600 x 1.400 mm This model is specially designed for the users requiring high production and considerable working speed also when using difficult materials. - stepless change of heater oscillation angular speed, independent of the linear feeding speed - accurate adjustment of the feeding friction pressure - adjustment of the starting point and stop point - thread heating by electric resistance - amperometer on the control panel for an accurate adjustment of the heating temperature - zig-zag height adjustment - automatic breaking of the thread - all functions are operated on the con ...

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Description: Saw blade diameter 81 mm , Voltage 380 V , On wheels , Without additional accessories without CE certificateserial number: 145,768, cutting length: 3,000 mm, Approx. Onsite Dimension. (l x w x h): 3,600 x 1,100 x 1,500 mm, weight approx.: 380 kg ... more information

Description: Upright projection 1250 mm, minimum veneer strip length approx 350 mm, minimum veneer strip width approx 45 mm, veneer thickness approx 0.3 to 1.5 mm, feed speed approx 20 to 50 meters per minute, heating zone length 1200 mm, working height 970 mm, total connected load approx 9.3 kVA, drive 2.2 kW, voltage 400 Volt, with CE certificate, additional accessories: support table right, cooling unit, replacement hinge, belt chainApprox. Onsite Dimension. (l x w x h): 4,500 x 2,400 x 1,800 mm, weight approx.: 2,300 kg

Description: Electrical connection 10.5 kW, machine number ,11520, oil hydraulic pressure 130 bar, movable optimizing laser, stop setting range 0 to 25 mm, light barrier and protective grid at the rear, control: ferrocontrol, type: MAG2, electrical connection 10.5 kW, with EC declaration of conformity issued in July 2009, accessories : Spare bladeserial number: 11,520, cutting length: 3,210 mm, Approx. Onsite Dimension. (l x w x h): 5,200 x 1,800 x 2,100 mm, weight approx.: 8,600 kg

Description: Serial number 10039, voltage 380 volts, maximum cutting height 60 mm, maximum cutting length 800 mm, with table support surface left and right, without CE certificate, with spare blade ,cutting length: 800 mm, Approx. Onsite Dimension. (l x w x h): 5,400 x 1,600 x 2,000 mm, weight approx.: 600 kg

Description: Projection: 900 mm Veneer thickness approx. 0.4 - 2 mm, Feed approx. 15 m/min, Drive motor 0.18 kW, total connection 0.5 kW, Space requirement LxWxH 1280mm x 580mm x 1470mm, Weight 166 kg. - NO CE certification! - PRICED IN RECONDITIONED CONDITION - SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. If objects can be seen in the photo that are not expressly listed in the lot description, these are not part of the sale. part of the sale. This naturally also applies to tools, additional equipment, accessories, software, equipment, etc. (in relation to the photo and lot description). ,Approx. Onsite Dimension. (l x w x h): 1,350 x 820 x 1,660 mm, weight approx.: 166 kg

Description: For assembling smooth veneers in the thickness range from approx. 0.4 to approx. 1.5 mm lengthwise. A special PVAc glue and the tried and tested Kuper special glue thread are used as the bonding medium. Kuper special glue thread is used in a super-thin quality (high yield). Min. veneer strip length: approx. 400 mm Veneer strip width: from 40 mm Material feed for butt gluing: approx. 15 m/min. Drive motor 0.55 kW, total connection 2.5 kW Air consumption: approx. 300 NL/min. Space requirement LxWxH 1700mm x 1020mm x 1600mm, Weight approx. 650 kg. SOLD IN FUNCTIONALLY TESTED CONDITION SOLD AS SEEN - WITHOUT WARRANTY ! Known defects: Sliding clutch bearing extremely loud. Heating for white glue defective. Discs for white glue application broken out Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly poin ...

Description: Projection: 900 mm Veneer thickness approx. 0.4 - 2 mm, Feed approx. 15 m/min, Drive motor 0.18 kW, Total connection 0.5 kW, Space requirement LxWxH 1280mm x 580mm x 1470mm, Weight 166 kg. SOLD AS SEEN - WITHOUT WARRANTY ! - NO CE certificationApprox. Onsite Dimension. (l x w x h): 1,280 x 5,800 x 1,470 mm, weight approx.: 166 kg

Description: Material: Wood and hard plastic Angle Adjustment: 45° to 90° adjustable Max. Cutting Width: 100 mm Max. Cutting Height: 152 mm Approx. Onsite Dimension. (l x w x h): 400 x 250 x 400 mm, weight approx.: 50 kg ... more information

Description: SPECIFICATIONS Hydraulic 4-roll plate roller Character: Haeusler Type: VRM 3000/15 Roller length: 3,000 mm Plate thickness: 15 mm Number of rollers: 4 Upper roller diameter: ø350 mm Hydraulic folding Hydraulic lifting Conical rollers 2 Powered rollers Transport dimensions: 7,000 x 2,250 x 2,300 mm Machine weight: 21,000 kgApprox. Onsite Dimension. (l x w x h): 7,000 x 2,250 x 2,300 mm, weight approx.: 21,000 kg

Description: veneer cutter made in Germany after pneumatic fixation cut up to 3000 mm veneer lengthApprox. Onsite Dimension. (l x w x h): 3,750 x 100 x 1,200 mm, weight approx.: 300 kg ... more information

Manufacturer: Josting , Type: EFS, Year: 1968, Control: hand, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: 60, Cutting lenght mm: 2800, Schnittbreite min-max mm: 500, Working hight mm: 30, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Knife drive: Elektro, Year :1968