extruders used for sale

Mikrosan MCV 68/25D Extruder like new condition Working hours : 1100 LD rate : 25 Maximum PVC-U capacity : 200 KG/hour Calibration Table Pulling device Tilting Table ... more information

Bandera 60 extrusion line 25 kW, 400 V Year 1961 Diameter 60 L / D ratio 20 Variable V gearbox With electrical panel Gauge holder bench with vacuum pump and variable speed track drive, Pagani brand ... more information

Bausano granulation line Parallel screws, diameter 140 mm Plate screen changer for 200 mm screens the machine has been heavily modernized. The frame and gear are from 1979, but the other elements have been replaced. 1. Plasticizing system - (screws + cylinder) - 2021 2. Control cabinet + all wiring + all sensors - 2022 3. The entire material feeding and dosing system - 2021 4. Screen Changer - 1998

It is 2003 model and working hours have been revised for 4 years. New screw barrel ... more information

Producer: Metalchem sp z o.o. (today ICHEMAD-Profarb sp. o.o., ichemad) A demonstration device, presented at the fair. Product: single-screw extruder with a head with a spiral core Purpose: for the production of single-layer HDPE pipes in the form of granules, up to a diameter of 250 mm The main technical parameters: extruder: - screw diameter 90 mm - the relative length of the screw 30d - barrier type barrier, high-performance for HDPE - installed power ~ 170 kW - design performance ≥ 450 kg / h   Head - number of heating zones 8 - heating power 33.4 kW (230V) - equipment: fitted mouthpiece and a core for the production of Ø180x16,4 pipes   Control system: The extruder is equipped with a microprocessor control and visualization system based on a central Allan Bradley controller with an industrial monitor with a function keyboard with standard contro ...

Extruder is missing electronics and it is not in running condition. Barrel 30D The barrel was opened for inspection of the liners and shafts, the hydraulics function correctly. Liner 1. Feed, 2.5D good condition Liner 2. Inter, 5.0D good condition Liner 3. Inter, 5.0D good condition Liner 4. Inter, 5.0D good condition Liner 5. Inter 5.0D good condition Liner 6. Inter 2.5D good condition Liner 7. XLT Discharge 5D good condition. Feed and return lines were removed and compressed air fed into circulation blocks. All blocks were found to have good flow. Pipework is in good condition with all solenoids present. All control thermocouples and melt thermocouples are in place but could not be tested due to condition of electrics. All the heaters are in place but could not be tested due to the condition of electrics. The barrel is in very good overall condition. Shafts Al ...

I am selling 2 extrusion machines, model sj35 and model sj45. complete production line. friendmachinery brand. ideal for creating filament and coils for 3d printers from pellets. offers are heard. shipments are not made. more information by private. ... more information

Conical twin screw extruder Drive: DC 9kW motor heating zones: cylinder - 3, head - 3 cylinder cooling - oil ... more information

Artec line Artec Model 900 extrusion line Model 900 125mm auger ... more information

Twin screw extruder SJZ92 / 188. 2009 onwards In perfect condition. Possibility of inspection in production. ... more information

 ... more information

Two Blow film lines CMG 55 HTM Year of production 2011 1. Single screw extruder CMG 5530 - Screw diameter 55 mm - L/D ratio 30/1 - Extruder drive – 47 kW AC - Lever type screen changer 2. Blow film die BHP 20 F D 150 mm, LDPE, gap 1,6 mm, Biflux type 3. Double flow high performance Air ring CR400 - Blower for cooling ring 5.5 kW with inverter 4. Gusseting device 5. Fixed Take-off unit 6. Single station automatic winder 7. Film width 1000 and 700 mm Blow film double flow extrusion die BHP 20 F D 150 mm, LDPE, gap 1,6 mm, Biflux type Capacity: 80-100 kg/h depend if the material, thickness and size Film width: 1000 and 700 mm

it is only DC-80 full complectation line left. There are some additional machines as well. It is chiller, air compressor, pallet mixer. ... more information

Used Pvc curly mat machine in very decent condition. There is no problem with the whole system. Everthing works smoothly ... more information

Conical twin screw extruder Drive: DC 9kW motor heating zones: cylinder - 3, head - 3 cylinder cooling - oil ... more information

PVC production line Screw diameter 55 mm. Main motor power 37 Capacity(kg/h) 100-150 Kg/h Effective length of screw(mm) 1050 Equipment Content : No. Description Quantity 1 twin-screw extruder 1set 2 vacuum calibration tank 1set 3 haul-off&cutter 1set 4 stacker 1set ... more information

Extrusion line for blowing polymer films of type ABA, MODEL 2L800 Manufacturer RUIAN AOXIANG PACKAGING MACHINERY CO., LTD 2017 onwards Specifications 1. Film thickness: 0.01 - 0.1 mm; (Thickness: 8%) 2. Maximum film width: 800 mm 3. Recyclable materials: LDPE + CaCO3, PND + CaCO3, linear LDPE; CaCO3 content - maximum 40% 4. Maximum performance: 100 kg / h; 5. Dimensions (L x B x H): 6000 x 3700 x 6500 mm; 6. Weight: 4.5 t; 7. Main power: 70 kW; 8. Certification: CE European Compliance Certificate, SGS Independent Examination Certificate, National Compliance Certificate of China GB4455 Data sheet 1. Extruder (2 sets) 1.1 auger diameter: 55 mm 1.2 Ratio of length to diameter: 30: 1 1.3 Maximum screw rotation speed: 100 rpm. 1.4 Type of screw: mixed type, with a barrier 1.5 The material of the auger of the cylinder: 38CrMo (American certificate of protection of inventions  ...

Plastic hose manufacturer extruder For processing LDPE, HDPE and regranulate, so far only clean original material was used within. Production size (tube width): 35 mm - 250 mm (without core change) Performance: depending on material thickness Pulley thickness: 25 mm Regularly maintained machine

coating machine ( extrusor single Line ) 1300A In producion Year : 2021 Can be inspected at work Max speed : 150m/min ... more information

Complete retrofitted line consisting of: Processable material: plasticized PVC composition active pay off passive pay off Bandera 4020 extruder retrofitted with Toshiba ivnerter cable and profile extrusion head 4 meter stainless steel tank double flywheel drive (interface on line with inverter) double reel winder for 600 reels