Manufacturer:
(Category: 302)
1 x Vacuum calibration unit for profiles Manufacturer: Battenfeld Type: K-400-V4 Year of construction: 1992 Total length: 6700 mm Vacuum connections: 4 x 8 pieces Water connections: 26 pieces Vacuum pumps No.1-3: 3 pieces of BluVac pumps from Speck, Energy-saving vacuum generation thanks to patented speed control Pump power: 3 x 4.3 kW Vacuum pump No. 4: Speck (5.5 kW) Longitudinal adjustment: electromotive Connected load: approx. 26 kW Accessories: 1 x water pump (1.5 kW) for the water circuit, 1 x blower (0.95 kW) for drying the profile,
Haul-off, used and refurbished Manufacturer: Battenfeld Type: P-250-SX-2000 Year of construction: 1988 Haul-off force: 30,000 N Pad width: 250 mm Effective contact length: 2000 mm Number of rubber pads: 200 pieces Haul-off speed: 0.16 - 4.0 m/min. Drive motor: 4.2 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic Profile cross-section: max. approx. 300 x 100 mm Power: 10 kW Dimensions: 3400 x 1300 x 2300 mm (LxWxH) Weight: approx. 2300 kg Condition: The haul-off has recently been completely overhauled.
Caterpillar haul-off, used Manufacturer: IDE Type: ME-31 Year of construction: 1976 Pad width: 180 mm Effective contact length: 800 mm Pull-off speed: max. approx. 10.0 m/min. Drive motor: approx. 3.0 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: manually by spindle Profile cross-section: max. approx. 300 x 100 mm Note: The haul-off was overhauled in 2015 and a new electrical control cabinet was installed. Condition: The upper gearbox is leaking.
olienherstellung =: PVC shrink and PET Line speed: 80 meters/min Final net film width: 4.2 meters Line speed: 80 meters/min Production capacity: 21 tons/day The machine includes: -Automatic turnstile unwinder 2 meters -Automatic turnstile -Winder 4.50 meters -Cooling system -automatic thickness control -automatic control of infrared heating -Automatic inline edge strip handling system -TCU -Controller fan -Cooling tower -Exhaust pipes -Exhaust hood -16 steel core width 4.8 meters -Complete spare parts (package purchased for 280.000 €) Dimensions approx. length 50 m x width 19.0 m x height 5.9 m
An extrusion recycling brand EREMA series type 1512 TVE for processing polyethylene (PE) and polypropylene (PP), polystyrene (PS), with screen changer, degassing for processing printed films. Capacity 750 - 950 kg/h depending on the polymer, electrics 240/400 volts, 50 hearts, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
EREMA Series Type 1310 TVE for the processing of polyethylene (PE) and polypropylene (PP), polystyrene (PS), polystyrene (PS), polystyrene Capacity up to 550 kg/h, electrics 240/400 volts, 50 heart, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
An extrusion recycling product EREMA series Type 1109 TVE for processing polyethylene (PE) and polypropylene (PP), with screen changer, degassing for processing printed films. Capacity up to 450 kg/h, electrics 240/400 volts, 50 heart, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
A well-preserved extrusion recycling product EREMA series RGA 80 TE for processing polyethylene (PE), polypropylene (PP), . Power up to 250 kg/h, electrics 240/400 volts, 50 hearts, short-term available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827 ... more information
This extruder from Periplast is in machine storage at Plastima Used Machinery. The extruder dates from 2005 and is in great condition. Brand: Periplast Model: Extrusora 25X25D Screw Type: Single Screw Screw Ø: 25mm Screw length: 25mm Motor power: 2.2 kW Year of Construction: 2015 ... more information
Injection molding machines of types VRC 601 must exclusively be used for the filling of molds with various kinds of plastic materials. Other uses will be deemed a violation of the intended use and exempt U. Kolb GmbH from being held liable for injuries and damage to persons and/or property. Strictly observing the safety instructions and notes issued by U. Kolb GmbH is also mandatory and forms part of the intended use provisions to be adhered to.
A used non-refurbished screen changer for an extrusion recycling brand BRITAS. The machine is located in a production plant. Power unknown, probably 300 - 600 kg/h, electrics 240/400 volts, 50 hearts, available at short notice. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
A used, non-refurbished extrusion recycling brand EREMA Type 1007 TVE for processing polyethylene (PE) and polypropylene (PP), for processing printed films. Fully equipped. The machine is located in a production plant. Power HD-PE 250 -300 kg/h, PE LD and PP300 - 350 kg/h, electrics 240/400 volts, 50 hearts, available at short notice. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
A used, non-refurbished extrusion recycling brand EREMA Type 1007 TVE for processing polyethylene (PE) and polypropylene (PP), for processing printed films. Fully equipped. The machine is located in a production plant. Power HD-PE 250 -300 kg/h, PE LD and PP300 - 350 kg/h, electrics 240/400 volts, 50 hearts, available at short notice. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory o ...
EDI Autoflex Extrusion Die width 900 mm. ... more information
Used first-class renovated and almost brand-new ready-to-use extrusion recycling machines make EREMA, various types, for sale. Offers according to the description of your needs. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827 ... more information
Stock - No. 1665 1 Gebr. ERMAFA compounding line type E 90.2 - throughput up to 450 kg/h depending on material Built in 1987 consisting of: Extruder Twin Screw Ø 2 x 90 mm - 25 L/D Synchronous Segment screws and barrels, water-cooled Drive 75 kW DC , 1450 rpm. 2 x degassing zones, 1x vacuum pump Hydraulic screen changer screen - Ø 150 mm >> WITHOUT control / control cabinet, electrical diagrams for new control are provided by us ! SPECIAL PRICE Further extruders and compounding lines from the Wuppertal warehouse - ready for demonstration.
Stock - No. 1919 1 complete set of extrusion tools/dies for the production of electric cable protection ducts/channels condition as new incl. punching unit used material: rigid-PVC blend ... more information
Stock - No.: 2166 1 used, in 2019 partly overhauled and tested film/foil/regrind pelletizing extrusion line EREMA type RGA 50 T equipped with: 1. cutter / densifier unit, new motor with 18,5 kW tangential ( T ) cutter - Ø 550 mm 2. Extruder single-screw Ø 50 mm – 20 LD motor 18,5 kW – NEW Frequency Converter 3. screen pack changer sieve- Ø90 mm with hydraulic unit-new 4. watering-granulation unit HG, pelletizer drive 0,75 kW 5. pellet drying vibrating dewatering unit GS 1000/200 6. control board ( new converter ) The line is ready for operation, date shortly in our workhsop Wuppertal-Germany. More regranulation-pelletizing lines ex stock available, ask for our actual machine-list or visit us