extruders used for sale

KUHNE EXTRUDER KF70E & CO. EXTRUDER K45-24D Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Foil nozzle // Max. film width 700-800 mm Fully existing infrastructure; control cabinets, pumps, etc. Material PS and PP were processed

Brand: Davis-standard, width: 1,400 mm, thicknesses: between 0.5 and 8 mm, year: 1999. Composed of: - Extruder 1 spindle brand: Davis-standard, 90 Ø diam, 32 L/D, engine: 250 hp, hydraulic filter degasser and changer and continuous flow gear pump. - Co-extruder 1 spindle brand: Davis-Standardar, 60 Ø diam, 32 L/D, engine: 60 hp, degasser, hydraulic filter changer - Co-extruder 1 spindle brand: Davis-Standardar, 60 Ø diam, 32 L/D, engine: 60 hp, degasser, hydraulic filter changer - Sheet extrusion head brand: IDE, width: 1,400 mm, thicknesses: 0.5 to 8 mm, up to 5 layers. - Calender, width: 1,500 mm, roller diameter: 460 mm. - Stretch and cooling table: 1500 mm. - Cutting shear.

Ghioldi extruder diam.80 low and medium density, original ALPINE 250 K/F IBC head. Oscillating towing on the frame, water-cooled towing cylinders, table width 1700mm, Cason treatment never used, automatic bubble guide, BST film aligner, bubble air replacement with IBC , air cooling with chiller, automatic spooler. Production varies according to the materials and external temperature, however, 220 kg/h can be reached. Doteco gravimetric system plus Moretto dosamaster. No. 01 new screw to be assembled, visible in operation, has worked a few days a month.

materials: LDPE HDPE PP installed power 260kw double degassing changer 200 mm cutting on the head (head for pp and ldpe) vertical centrifuge capacity ldpe 300-350 kg yield pp 320 kg depending on the material spare heaters mill knives etc. Second plasticizing system after complete regeneration

Extruder 1 spindle: 125 mm Ø, 35 L/D, brand: Eurotecno, with forced feeding, degassing. Motor: 160Kw, hydraulic filter changer: 250, wire head. Bathtub and noodle, Brand: RIETER 200. Year: 1999. Production: 500Kg/h.  ... more information

Complete extrusion line with support for sale, dispense, extrude, granulate and SAG Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: A439697 Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote

AMUT BA92, Built in 2000, Twin-screw extruder with 2 Ø 92 mm screws. 22 L/D, n.2 volumetric dosing units, 59.5 kw motor, Electric cabinet and control panel, CE certification, manual and diagrams, Machine in very good conditions, Throughput with PVC profiles: approx. 250 kg/h ... more information

for LDPE HDPE PP ABS PC PS, Nominal throughput rate 350-450 kg/h depending on feeding reate and material including scrap silo fedding auger crammed feeder extruder with 105 mm screw 40 LD double degassing 110 kw a.c.drive non stop hydraulic screenchanger water ring pelletizer drying centrifuge electrical cabinet user’s manuals and drawings constructed in 2000 offered RECONDITIONED, On request, we can fit this extruder with a fully automatic screenchanger.

LEDA EXTRUDER 160 mm 50 LD 2 degassing pumps, for PP PS PE ABS PC, etc., Very good quality for this extruder, 2 m3 ca. storage silo, crammed vertical screw for light materials with adjustable speed,, extruder with barrel 160 mm. screw, 50 L/D, Infra Red Heaters, 355 kw a.c.drive with inverter (about 60% power used in work), Double vacuum degassing system, Control cabinet, Nominal throughput rate 800-900 kg./h, The extruder is offered RECONDITIONED, and can be completed with FULLY AUTOMATIC SCREENCHANGER + PELLETIZER, L/D RATIO: 50:1

Description Cutt off for agricultural pipes V-cut nr.2 pipes at a time cut ... more information

Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading

Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC  ... more information

2 Screw Extruder Co-rotating spindles 40 mm Ø diam, 44 L/D, Brand: Maris Model: TM40 MPL/D44 Variable motor: 75 Kw (100 hp) Year: 2000. 2 x 70% replacement spindles.  ... more information

see pdf description  ... more information

PVC production line Screw diameter 55 mm. Main motor power 37 Capacity(kg/h) 100-150 Kg/h Effective length of screw(mm) 1050 Equipment Content : No. Description Quantity 1 twin-screw extruder 1set 2 vacuum calibration tank 1set 3 haul-off&cutter 1set 4 stacker 1set ... more information

Description Twin Roll Cast Cooling Calender - Twin Cooled Cylinders, diameter 700 mm each - Cylinder length 2650mm - Eurotherm Gauging System ... more information

Description TWIN HELIX EXTRUDER Screw Diameter 90 mm L/D 30 Screw Speed 161 rpm Barrel Zones 5 Motor Power 91Kw Motor Speed 1750 rpm Automatic Screen Changer Produced Material PP & PE ... more information

Description TWIN HELIX EXTRUDER BATTENFELD GLOENCO Screw Diameter 90 mm L/D 30 Automatic Sreen Changer NORDSON EH-35 Produced Material PP & PE ... more information

Description TWIN HELIX EXTRUDER BATTENFELD GLOENCO Screw Diameter 90 mm L/D 30 Automatic Sreen Changer NORDSON EH-35 Produced Material PP & PE ... more information

Description Winder with rolls extractor ... more information