subcategories
(3rd category level)
Manufacturer:
(Category: 303)
Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition ... more information
Used molds, in good condition. Available ex stock ... more information
Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition ... more information
used double head, with WDS adjustment, in good condition. Stitch 125 mm, nozzles up to 55 mm. ... more information
Two-station machine up to 3 ltr. Extruder 70/24D. Triple head 85 mm center to center. Moog TMC 3 control. Triple Proportional control for mold / carriage / calibration. Leak test pre-staged ... more information
1 used Strec blower, manufacturer SIDEL, type SBO 14 SERIES 2, built 2004, Siemens S7-400, capacity at 2.0L 16000 Fl/h - at 0.5L 21500 Fl/h,, in principle with shapes 0.5 L + 2.0 L round petaloid, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, Formling mouth 28 / 1810, operating hours 72958, production hours 34191. Maintenance by sidel and own technicians. Condition: neat/good. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Rafael/Compere, some spare parts. No cooling unit, no high-pressure compressor. Last production June 2019. Immediately available.
1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.
10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system ... more information
Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds ... more information
Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds ... more information
6 stations machine, blow volume 0.2-2.0 litre, capacity: approx. 7,200 bottles / hrs, incl. preform containers, loaders and sorters. Available at an extra cost: 0.5 + 2.0 ltr. CSD 6-speed moulds, compressor system, cooling unit ... more information
Blow volume 0.25-3.0 ltr. PET, 6 stations, up to 7,200 bottles/hour, inckl preform silo, steep conveyor and installer. Moulds, compressor and water cooler available at an additional cost. Good condition! ... more information
2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour ... more information
PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds. ... more information
PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder. ... more information
PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit ... more information
Manufacturer | Manufacturer: Uniloy Machine Type | Machine type: BWF 16 E Stations | Stations: Single Station | Single station Year of construction | Built: 2004 – overhauled in 2019 | 2004 – refurbished in 2019 Location | Location: Germany | Germany Clamping force | Clamping force: 160 kN Control Type | Control system: Beckhoff Extruder | Extruder: S 90/24D Extrusion Head | Extrusion Head: Single Head PWDS | Single head PWDS Mold dimensions mm | Mold dimensions mm (A Length / length x B Width / width x C Depth / depth): 520 x 520 x 2x180 Bottle Volume Max. | bottle volume max.: 15 L Screen Language | Monitor language: German / English | German / English Operating hours | Working hours: approx. 3000 | Around 3000 Accessories | Accessories: Conveyor belts | conveyor belts Packing table | packing table Delivery Time | Delivery time: ...
Head type: 3-SH/60-125-PE/T (DeCo) ​Marke/ Brand: UES Condition: New/ New Layers : 2 Center distance: 125 mm Nozzle/ Die: 60 mm Hoses/ Parisons: 3 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No ... more information
Manufacture | Manufacturer: Bekum Machine type | Machine type: BA15 Station | Stations: Single station | Single station Construction year | Year of construction: 2003 Location | Location: UES Clamping force | Clamping force: 170 kN Control system | Control type: Orig. Bekum Parison Control | WBK: 50 points | 50 points Extruder | Extruder: S 82/20D Parison Head | Hose head: Accu-head AKZ2.3 refurbished 2020 | Battery head AKZ2.3 overhauled in 2020 Mould Dimension | Shape dimensions mm (A length/B width/C depth): 525/400/2150 bottle volume | Bottle volume: 40 L Monitour language | Screen language: English | English Delivery time | Delivery time: Immediately | Right away
Manufacturer | manufacturer: Battenfeld Fischer Machine Type | machine type: VK 1-20 Stations | stations: Einstation / Single Year of construction | Built: 1985 Location | Location: Europa/ Europe Clamping force | Clamping force: 180 kN Control Type | control system: Siemens S7 + Beckhoff for WDS & PWDS Extruders | Extruder: 80/20D Extrusion Head | Extrusion Head: S1-120 (Original Battenfeld) Mould dimensions mm | Mold dimensions mm: 480/540/2155 Bottle volume max. | bottle volume max.: 20 L On-Screen Language | monitor language: German/ Deutsch Delivery time | Delivery time: 2-4 weeks