blow moulding machines used for sale

Extruder 65/22D. Battery head 3.7 ltr. Locking plates 600 x 600 mm. Clamping force 630 kN. New Beckhoff control system installed in 2019. Available immediately from stock  ... more information

Kosme KSB 3000, with 3 tools, achievement approx. 3300 Fl/h with 1.5 l ... more information

unused machine. Was set up at the customer's site at the end of 2021, some samples were run and then the machine was never used again. Extruder 70/24D, single head, nozzle up to 120 mm. B&R control. All movements proportionally controlled. With waste and bottle conveyor. Optional moulds for 1-tr and 0.5 litre round bottles available

Krosownice in good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder  ... more information

Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...

Technical data: 2 stations wind moulding machine, extrusion PE 90 mm, 50 points Moog Programmer, control Geforn 186-th wind volumes max. 5,000 cubic centimetres  ... more information

Battenfeld Fischer Type: BFB 1-6 D, 1000 h runhour! Control: - Built: 1996 Other 2 litres, double head double station  ... more information

Throat depth: 915mm, spindle stroke: 110mm, table stroke: 200mm, max. opening between table and spindle: 310mm, controls: FAGOR, length: 905mm, width: 1550mm, height: 1700mm, weight: 648kg. ... more information

This EXTRAPLAST 140to Blow Moulding machine was manufactured in the year 2015. It is equipped with a it-AUTEC Blow Control. The machine has a clamping force of 1400 kN. See tech specs details in attached PDF (German). ... more information

This YANCED YS600 Blow Moulding Machine was manufactured in the year 2015 in Spain. The machine has a clamping force of 180 kN. ... more information

Description: engine power: 80 kW heating power: 49 kW max. hydraulic pressure: 250 bar max air pressure: 10 bar working pressure: 330 bar mould clamping: ,450 x 850mm  , general overhaul in 2008  , detailed dimensions in attached PDF document 2 trucks required for transport Approx. Onsite Dimension. (l x w x h): 5,500 x 1,700 x 3,400 mm, weight approx.: 19,900 kg

 ... more information

Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale, maximum capacity of 3.000 bottles per hour with zero working hours completed in 2011. The machine was dry cycled and tested by a Tetra-Pak (Sidel) technician. The machine has the following components: 1. Main PET bottles blow moulding module 2. Silo with elevator for preforms 3. Chiller for cooling MTA-TAE 051 4. Moulds lifting device The moulds are not included in the price. The price given is Ex-Works our warehouse. The Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale with two moulds, serial nr. 40102/2542, maximum capacity of 3.000 bottles per hour with zero working hours, and size of bottles between 0 and 2 liters. The machine was completed, dry-cycled and tested in 2011. It does not come with a pressure compressor. The machine does the movements with a press. The mould  ...

PET bottle blow molding machine, with a production capacity of up to 4000 bottles/h (depending on the format). For formats between 0.25 liters up to 3 liters. Composed by: - Oven for heating preforms composed of 6 heating modules with 8 infrared lamps each. - Preform transfer wheel - Compressed air blowing body in two stages, low pressure pre-blowing and subsequent high pressure blowing. - Bottle transfer wheel Delivered with pallet turner. Available documentation

Kautex KB 15/10-S60/25 Blowmoulding machine From 1992 Type: continuous extrusion Clamping force : 200 kN Closing stroke for moulds: 2250 mm Max volume for the part: 30 L Cylinder diameter: 90 mm Die diameter: 140;170;190 mm Max package for tools: 700600(2300) mm Parison control: Yes Installed power: 125 kVA

The blow moulding machine ptb120d used for producing toys, drums, jerrycans, kettles, water tanks, etc, is single station with single die head, which is specially designed for 60l as maximum volume, suitable for hdpe, pe, pp, pvc, petg and other materials for blow moulding. Specifications: Max container capacity: 60 L Number of die heads: 1 Machine dimension (LWH): 865.0 meters Total weight: Ton 35 CLAMPING UNIT Clamping force: 600 KN Platen opening stroke: 880-1780 mm Platen size: 9501000 mm Max mould size: (WH) 9501600 mm Mould thickness: 900-1100 mm POWER Total power: 200 KW Fan power for screw : 0.185 KW Air pressure: 1.0 Mpa Air consumption: 1.2 M3/min Average energy consumption: 120 KW EXTRUDER UNIT Screw diameter: 120 mm Screw L/D ratio: 30:1 L/D Plasticizing capacity: 250 Kg/hour Number of heating: 5 Zone Extruder heating power: 32  ...

The machine is almost brand new. It was produced in 2021 February and installed in 2021 July it includes : - AL-250-50S ISBM machine - Mitsubishi RV-3SB , 5 axes take out robot with complete cell / conveyor , controller and teaching pendant - Wittmann Dry MAX E60 PET dryer (2013) The machine has the following extra options: - EN (European Norm compatibility) specification (value: JPY2,500,000) All the other options: (value: JPY960,000) -Blow clamping short stroke - blow core short stroke - Lip cooling circuit - blow & bottom mold chiller cooling, The machine will be in production until 2023 January. It is possible to see in running.

For sale PET blower with related format molds: - 500ml - 750 ml (Both version for interlocking cap and for trigger) - 1 Lt - 1.25 LT The machine has a production capacity of 510 bottles/h Seen and liked ... more information

LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L Produced ( 0,33 L 0,5 L 1,0 L 1,5 L 2,0 L) AUXILARY EQUIPM ... more information